The disposal price has been reduced. Member discounts are not applicable. 2025/9/14 sales price 29,800 yen. Speaker base for TANNOY CORNER YORK It was a long-established gas lamp in Kobe and had a 3-legged CORNER YORK on it. The structure is solid, and the appearance is elegant, chic, and nice. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1000 x H60 x D680 mm 13.5 kg (actual measurement)
USB cable 1.5m USB/A-B specification It is designed to suppress signal loss and distortion, and the sound quality tuning is clear and delicate. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.10.22 continuity confirmed
Accessories: original box
Orthophone 2M series SP cartridges are rarely in stock. A 65 μm SP conical needle is used at the needle tip to achieve extremely high sound quality SP playback (Murakoshi Yoichi)
Maintenance information: 2025.10.11 sound output confirmed
Accessories: needle cover, original box, 2 types of mounting screws
Main specifications: mm type output voltage 4.0 mV, suitable needle pressure 1.8 g
Digital coaxial cable 0.35m 75Ω digital coaxial cable from Hisago Denshi made to order. Silver-plated 6N-OFC, collet chuck type plug adopted (Murakoshi Yoichi)
Maintenance information: 2025.10.19 Continuity confirmed
Accessories: none
This is a Sony System Component Liberty series speaker. The balance is good and it plays flat. There is a feeling of use such as small scratches, corner hangings, broken edges, broken frames on one side, etc., and the saran net is dirty and frayed (Murakoshi Yoichi)
Maintenance information: 2025.8.28 sound output confirmed
Accessories: saran net
Main specifications: 6Ω maximum input 160W W320 × H575 × D262 mm 9.6 kg
The price has been drastically reduced. 2025/5/24 sales price 4,000 yen. ※Inexpensive because it is in poor condition. Currently sold. For those looking for an AV speaker! The compact size, which can be used in both front and surround, is attractive, and opens up a natural sound space unique to Yamaha. In addition to the exterior, there are many screw holes, and a feeling of use can be seen, such as peeling, dullness, scratches, stains, etc. on the bottom plate (Kobayashi Hitoshi)
Maintenance information: 2025.5.11 Operation confirmed
Accessories: saran net
Main specifications: 2 way 3 speakers 6Ω 86dB W107 × H360 × D133.7 mm 2.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2025/3/7 sales price 5,000 yen. The relay box extension cable (2-core shield φ4.5) seems to be unused (Murakoshi Yoichi)
Accessories: bobbins
The price has been reduced. 2025/10/8 sales price 3,000 yen. ※Inexpensive because the room smells bad. Speaker cable has a parallel 2-core structure with a 0.9 m pair of untreated 6N stress-free cables and electromagnetic wave absorbing non-magnetic threads. The cable is natural, smooth, and has a wide range, so it is a cable that can be used in any genre. The exterior has strong dullness, threads, and discoloration (Murakoshi Yoichi)
Maintenance information: 2025.10.8 continuity confirmed
Accessories: none
The disposal price has been reduced (member price not applicable) 2025/8/26 sales price 10,000 yen ※The marble is glued to the top plate and does not peel off, and it is cheap because it is in poor condition such as dents or stains on other center cones. It is a speaker that is easy to listen to regardless of genre, with 4 3-way speakers, with soft, spreading bass and moderately stretchy treble. The exterior has dull stains, scratches, and peeling veneer due to use over time. serial
(ASAINE Tomonori)
Maintenance information: 2025.8.26 sound output confirmed
Accessories: saran net
Main specifications: W280 x H980 x D280 mm
kg
RCA cable is a stiff, sturdy cable with 0.9 m pair collet chat specifications. The exterior has a sense of specification such as dullness (Tomoho Asaine)
Maintenance information: 2025.10.18 continuity confirmed
Accessories: none
Disposal price has been reduced (member price not applicable) 2024/9/16 sales price 10,000 yen A large self-made audio board with a sturdy wooden board sandwiched between a floor mat and felt. It was created by the previous owner for TANNOY Westminster. As for the exterior, there is a feeling of use such as scratches on the bottom (Tamai Jun)
Accessories: none
Main specifications: size W1040 x D700 x H23 mm, weight 8.0 kg/sheet
The disposal price has been reduced (member prices are not applicable) 2024/9/13 sales price 9,800 yen This is a set of 6 concrete plates specially manufactured for the Aetheric Field Sound Stand. There is a feeling of use on the exterior due to scratches, chips, writing, etc. (Asaine Tomoho)
Accessories: none
Main specifications: size 855 x 305 x 30 weight 16.9 kg (actual measurement)
The disposal price has been reduced (member prices are not applicable) 2025/6/19 sales price 4,000 yen An entry theater speaker with a slim design. In addition to a soft dome tweeter that reproduces glossy sound, it is equipped with a D.D.L. cone woofer unit that realizes accurate piston motion over a wide band. The exterior is dull. Serial APN80240105805 (Jun Tamai)
Maintenance information: 2025.6.19 sound output confirmed
Accessories: Saran net instruction manual
Main specifications: dimensions 250 x 75 x 130 mm, weight 1.4 kg
Disposal price has been reduced (member price not applicable) 2025/8/16 sales price 12,800 yen This is a 1-inch wooden horn with unknown model number. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: aperture diameter W320 mm x H125 mm W370 x H185 x 278 mm 1.4 kg (actual measurement)
The price has been drastically reduced. 2025/10/13 sales price 89,800 yen This is a current model that aims to achieve both the agility of the Soavo-2 and the gentle bass of the Soavo-1. Although it is the Yamaha sound of yesteryear, there is a sense of speed for its size, so you can enjoy the modern sound. Since the terminal is compatible with banana plugs and bi-wire, the connection method is also flexible. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.10.12 Operation confirmed
Accessories: instruction manual, saran net, jumper cable
Main specifications: 3-way 3-speaker bass reflex type advanced PMD cone playback band 35 to 100 kHz 6 Ω maximum input 160 W sound pressure level 87 dB crossover 450 Hz, 4.5 kHz W349 x H1051 x D487 mm (including stand) 26.5 kg
The disposal price has been reduced. 2025/8/1 sales price 69,800 yen Motor manufacturer maintenance completed in 2024/3. This model was commercialized by setting up the DA-305 on the DP-3000. The tone arm is simple and easy to handle, so it's easy to set up. The content firmly captures the basics. You can fully enjoy the goodness of analog, and this model is also recommended as an introductory machine. There is a scuff on the dust cover (Murakoshi Yoichi)
Maintenance information: 2024.3.12 Maintained (transistor, capacitor replacement, adjustment)
Accessories: none
Main specifications: 30cm die-cast aluminum (DP-3000) direct drive static balance S-shaped tone arm (DA-305) oil dump arm lifter needle pressure adjustment range 0 to 3 g compatible cartridge weight range 4 to 15 g W530 x H180 x D440 mm weight 10.8 kg
Maintained by the manufacturer! Arrived for the first time in 3 years! Limited edition reference series model. Strength with added momentum and sharpness has been added to the conventional thick sound. The fact that it combines a relaxed, rich, and glossy tone with a sense of speed due to thorough non-feedback is also attractive. Dullness over time and small scars (Oikawa Tetsuji)
Maintenance information: 2025.10.22 Marantz metropolitan area maintained (tray clamper belt replacement. (Other operation checks)
Accessories: remote control, instruction manual
Main specifications: DAC7 (Bitstream) D/A converter equipped with 2 digital outputs (coaxial, optical), 2 analog outputs (RCA, balance) W475 x H143 x D359 mm 18.5 kg
*Currently sold. Fidelity-Research's standard model for light needle pressure. The simple design is also beautiful, and you can enjoy high-quality analog sound at an affordable price. There is a feeling of use such as dullness over time. ※The phono cable is out of stock (Yamato Yuki)
Maintenance information: 2025.10.10 continuity confirmed
Accessories: none
Main specifications: static balance type short arm, effective length 245 mm, needle pressure range 0 to 3 g
The price has been reduced! 2025/10/12 sales price 49,800 yen ※It is cheap because the TW is in poor condition, such as dents. Tall boy from the iQ series. The bright, sharp mid-high range and the traditional, thick, and stable sound are attractive. It is an easy-to-use speaker that can be used for a wide range of applications, such as AV front and sub. The exterior has small scratches and dullness, etc., and there is a feeling of use over time. Serial 3147156G/3147157G (Tomoho Asaine)
Maintenance information: 2025.10.16 Operation confirmed
Accessories: saran net jumper cable
Main specifications: 3 way 4 speaker output sound pressure level 91 dB impedance 8 Ω playback frequency band 38 Hz to 40 kHz W220 x H942 x D327 mm weight 16.6 kg
The price has been drastically reduced. 2025/9/8 sales price 99,800 yen Denon's first full-size premain compatible with network playback. It uses a two-stage configuration with the same variable gain type preamp and power amplifier as the Denon 110th anniversary model PMA-A110, and the DNA of higher-level models, such as introducing similar high sound quality parts and exclusive custom parts, has been firmly inherited. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 50W+50W (8Ω) PHONO MM/MC Bluetooth version 5.4 playback sampling frequency DSD2.8/5.6 MHz WMA1, MP3, MPEG-4 AAC32 to 48 kHz WAV, FLAC 32 to 192 kHz Apple Lossless 44.1 to 192 kHz W434 × H131 × D375 mm 8.3 kg
Accessories: instruction manual, remote control, power cable, original box
Main specifications: 50W+50W (8Ω) PHONO MM/MC Bluetooth version 5.4 playback sampling frequency DSD2.8/5.6 MHz WMA1, MP3, MPEG-4 AAC32 to 48 kHz WAV, FLAC 32 to 192 kHz Apple Lossless 44.1 to 192 kHz W434 x H131 x D375 mm 8.3 kg
*Currently sold. Self-made 3-way speaker. I'm carrying Electro Voice SP12b, T35, and KLIPSCH drivers K-55-V. The network is self-made. The sound is bright and stretchy without being carefree in the plump low frequencies. Casters are attached to the bottom. The exterior has a feeling of use over time, such as scratches, dirt, peeling veneer, etc. (Takahashi Nobuyuki)
Maintenance information: 2025.10.21 sound output confirmed
Accessories: saran net
Main specifications: body dimensions W614 x H905 x D500 mm weight 44.4 kg [SP12B] 30 cm double cone type unit diameter 311 x depth 172 mm weight 5.2 kg [T35] horn type tweeter crossover frequency 3.5 kHz or more 8 Ω W51 x H133 x D80 mm weight 1.0 kg [K-55-V] driver diameter 107 x depth 57 mm (actual measurement) woofer part weight 35.1 kg horn part Weight 9.3 kg
Large machines can be stored with a loading space of 570 x 534 mm. The space between the frames can be adjusted at a pitch of 35 mm, and heavy equipment can be mounted with a sturdy shelf board (22 mm thick) and a 5-point support structure. The shelf board has a high rigidity and high specific gravity design with a cast iron core sandwiched between high-density particle board and finished with hard melamine on the surface. There is a feeling of use on the exterior such as scratches and dullness (Tamai Jun)
Accessories: spike spike receiver
Main specifications: 4-stage vertical load capacity/1 stage up to 100 kg W620 x H833 x D534 mm weight 56 kg
Maintained! Arrived for the first time in 7 years! This is a reprint of SANSUI's highest peak model AU-111. The power tube uses 6L6GC made by Svetlana. The knobs and insulators are made with care and made from solid aluminum. The energetic sound, which has nothing to do with muddy refinement in a good sense, is sure to capture the hearts of music enthusiasts who love jazz and rock and won't let go. The exterior is dull, etc., but it is a beautiful individual for its age. Serial 601060029 (Fujisawa Yukishi)
Maintenance information: 2025.10.24 Maintained (coupling capacitor replaced. Jumper creation and installation, solder correction, vacuum tube pin cleaning
Switch and volume check tone knob bending correction
(I checked the bias adjustment output audio.)
Accessories: power cord
Main specifications: use vacuum tube 6L6GC x 4/12BH7A x 3/ECC83 x 6 effective output 45 w/ch (8, 16 Ω) frequency characteristics 20 Hz to 50 kHz (± 1 dB) total harmonic distortion ratio 0.8% or less (8 Ω at effective output) mixed modulation distortion ratio 0.8% or less (8 Ω) damping factor 15 (8 Ω) input sensitivity/input impedance (1 kHz) MC (using HIGH, A-603S) 0.25 mV (30 to 100 Ω), MM 4.0mV (100kHz), LINE 250mV (100kHz) W460×H197×D433mm 26.0kg
The price has been drastically reduced! 2025/10/18 Sales price 798,000 yen Maintenance completed product including capacitor replacement! A single amplifier equipped with a vacuum tube “211,” which features brightly shining filaments. It's easier to drive and easier to handle than the 845, which is often compared. It features a slightly round, energetic, and powerful sound. Excellent compatibility with large ALTEC speakers, etc. There are some dullness and scratches due to aging (Yamato Yuki)
Maintenance Information: 2025.10.18 Maintained (22 μF Electrolytic Capacitors and 3 Additions; 3 Resistors; 1 W and 1/2 W Deterioration Replacement; 3 Resistors; 40 μF × 2 Deterioration Exchange; Vacuum Tube 211 Noise Exchange; HUM ADJ. Readjustment; Output Transformer Rewinding Repairs; Vacuum Tube Sockets and RCA Jack Caulking Repairs ※ Other operation checked with AC100V (rated output measured at 8W SP: 8Ω)
*The grid cap of the vacuum tube 310A has been repaired by adhesive. (Please refrain from extracting and inserting as much as possible)
Accessories: none
Main specifications: used vacuum tube GE 211 x 1, GE VT-4C x 1, WE 310A (large punch) x 2, RCA 7-29A x 2
Dimensions and weight W500 x H273 x D364 mm 38.1 kg (all measurements are actual, dimensions include protrusions)
Maintained! A crisp, bright, and sharp sound typical of Marantz from the 1970s. Exactly, it's an American sound on the west coast. The design is also a simple design typical of US Marantz. The exterior condition has dullness and scratches over time. Serial 1760 (Yamato Yuki)
Maintenance information: 2025.10.23 Maintained (fuse holder, C in the output mute circuit, Tr in the board, replacement of other missing capacity Tr, output mute relay contact polishing, operation check)
Accessories: A copy of the English instruction manual
Main specifications: 125W+125W (8Ω) W445 × H170 × D265 mm 14.8 kg
This is a 4-channel renewable cartridge. The company's product, which was sold in the mid-1970s, is the PU series with slightly heavy needle pressure. The flat, calm texture elegantly plays solo performances on the piano, etc. (FUJISAWA KOSHI)
Maintenance information: 2025.10.24 Operation confirmed
Accessories: No accessories
Main specifications: MI type needle tip 0.3 x 0.7 mil oval diamond output voltage 4 mV/5 cm/sec playback frequency band 10 to 50,000 Hz impedance 3 kΩ needle pressure 0.75 to 2.0 g dead weight 6.8 g