The price has been drastically reduced. 2025/5/14 sales price 14,000 yen. The TD-124 idler is slightly dirty, but I don't feel much of a feeling of use. It's still resilient (Murakoshi Yoichi)
Accessories: none
Main specifications: 80 mm diameter (actual measurement)
Power transformer primary: 100V secondary: 4-6.3V/3.6A x 2 5/3.8A 5-7.5V/3A 4-5V/3A 400-360-120-0-360-400V/250mA W90 x D100 x H158 mm approx. 4.6 kg/pcs No TAMURA badge, and the end of one side of the plate has been removed (Kojima Yosuke)
Accessories: none
The price has been reduced. 2025/5/4 sales price 15,000 yen VICTROLA sound box. The sound output has been confirmed. Please use it as a spare (Oikawa Tetsuji)
Maintenance information: 2025.5.4 operation confirmed
Accessories: none
The price has been reduced. 2025/5/4 HMV sound box with sales price 50,000 yen. The sound output has been confirmed. Please use it as a spare (Oikawa Tetsuji)
Maintenance information: 2025.5.4 operation confirmed
Accessories: none
Line output transformer pair for preamp sale 1st: 10 kΩ 2nd: 600 Ω transformer ratio 1:0.245 response 15 Hz to 50 kHz primary allowable DC current 20 mA secondary maximum output voltage 30 Vrms W50 × H80 × D56 mm 0.74 kg/piece with original box, specifications, and TANGO badge in good condition (Kojima Yosuke)
Accessories: original box, specifications, TANGO badge
Garrard 301 idler I feel a slight feeling of use. It's elastic. It is a type that is thick all over (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 65mm (actual measurement)
*Sold individually, they are inexpensive because they are painted in silver. Input transformer primary: 5 kΩ/primary series (driver tube RP = 3 k to 7 kΩ recommended), 1.25 kΩ/primary para (driver tube RP = 750 to 1.75 kΩ recommended) primary side inductance 50 h/15 mA (primary series), 13 h/30 mA (primary para), transformer ratio 1+1:1+1 (primary: secondary) DC resistance 340 Ω (all primary), 440 Ω (all secondary) W50 × 50 D55×H95mm 0.78kg TANGO badge is missing (Kojima Yosuke)
Accessories: none
Main specifications: impedance between terminals 3-5:209.9 Ω, 4-6:208.6 Ω, 8-10:162.4 Ω, 9-11:16 6.2 Ω
Power transformer primary: 100V secondary: 320-280-0-80-280-320V/200mA 6.3V/3A 1-2.3V/3A 4V/3A 2.5-4V/5A 2.5V/5A W90 × D98 × H145 mm 4.3 kg with replacement box There are abrasions and line scratches in places (Kojima Yosuke)
Accessories: replacement box
Choke transformer 5H/250mA (maximum 330mA) DC resistance 67Ω (measured 65.3 Ω) W84 x H105 x D76 mm 2.3 kg no TANGO badge, paint discoloration and minor scratches (Kojima Yosuke)
Accessories: none
The disposal price has been reduced (member prices are not applicable). 2025/3/21 sales price 128,000 yen input transformer sold 1 piece only DC resistance check was performed on the WE49A amplifier super permalloy core tester (measured values described in main specifications) W82 x H91 x D67 mm 1.6 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Main specifications: impedance 1-2:0.866 kΩ 3-4:3.04 kΩ 5-6:0.876 kΩ 7-8:2.99 kΩ ※Some wiring was cut when checking measured values
Choke transformer sold 1 piece 15h/120mA DC resistance 185 Ω (actual measurement 191.7 Ω) W90 x H96 x D77 mm 2.34 kg/piece (actual measurement, not including protrusions) in good condition with original box (Kojima Yosuke)
Accessories: original box
Impedance matching autotransformers sold in pairs are matching transformers with extremely flexible characteristics. Rated at 100W and matched to 4, 8, 16, and 32 ohm loads. It can also be used for fine adjustment of output sound pressure W105 x H90 x D80 mm, W61 x D87 mm between stay holes 2.6 kg/piece (actual measurement, including protrusions) The fixed stay on one side is bent ※The resistance value between each terminal has been checked with a simple tester (Kojima Yosuke)
Accessories: none
Main specifications: impedance 1-5:0.5/0.4 Ω, 2-5:0.6/0.5 Ω, 3-5:0.8/0.8 Ω, 4-5:1.2/1.2 ohm ※ same for terminals 5 → 6
*Only 1 impedance matching autotransformer is a matching transformer with extremely flexible characteristics. Rated at 100W and matched to 4, 8, 16, and 32 ohm loads. It can also be used to fine adjust the output sound pressure W105 x H90 x D80 mm, W61 x D87 mm between stay holes, 2.6 kg (actual measurement, including protrusions), bends to the terminal board, and there is dirt all over ※The resistance value between each terminal has been checked with a simple tester (Kojima Yosuke)
Accessories: none
Main specifications: impedance 1-5:0.4 Ω, 2-5:0.6 Ω, 3-5:0.8 Ω, 4-5:1.2 ohm ※ same for terminals 5 to 6
This is Project's 160g counterweight. If you've been looking for one, take this opportunity! You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: 160g
The disposal price has been reduced! Member prices are not applicable. (2013/8/24 old price 200,000 yen) It's a super rare item! This is a rare attenuator manufactured by DAVEN. Equipped with a thread resistor. Mono phone terminals (standard plugs) can only be used with Western-only ones.
Accessories: none
Power transformer primary: 100-110V secondary: 330-250-80-0-250-330V/250mV, 5V/3A, 6.3V/3A x 2 W90 x H146 x D102 mm 4.3 kg (actual measurement, not including protrusions) There are abrasions in places (Kojima Yosuke)
Accessories: none
Unused item! Choke transformer 1.2h/400mA DC resistance 17Ω (measured 17.1 ohms) W94 x H62 x D57 mm 0.86 kg (not including protrusions) with original box (Kojima Yosuke)
Accessories: original box
Choke transformer 30h/100mA DC resistance 285Ω (actual measurement) W81 x H102 x D69 mm approx. 2.0 kg (actual measurement, not including protrusions) There are some hook scratches (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 6.3V/4A, 6.3-7.5-12V/5A x 2 W105 x H120 x D105 mm approx. 5 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Power transformer primary: 95-100V secondary: 250-0-250V/80mA, 780-750-600-400-0-400-600-780V/200mA W130 × H150 × D128 mm approx. 9 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Output transformer sold 1 piece Primary: 14 kPPΩ Secondary: 600 Ω WW76 × H71 × D43 mm 0.6 kg (actual measurement, protrusions not included) There are paint peeling and seal marks in places (Kojima Yosuke)
Accessories: none
* It seems to be an output transformer from the specifications; sold 1 piece, primary: 10 kΩ, secondary: 600 ohms, W76 x H71 x D43 mm, 0.6 kg (actual measurement, not including protrusions), there is paint peeling in places (Kojima Yosuke)
Accessories: none
Power transformer used in MQ60 vacuum tube amplifiers Primary: 100V Secondary: 360V/280mA 100V/350mA 60V/70mA CT-6.3 V/2A W104 × H97 x D87 mm approx. 4.3 kg (actual measurement, not including protrusions) (Yosuke Kojima)
Disposal prices have been reduced. Member discounts are not applicable. 2018/10/24 Sales price 3,000 yen These are parts made in Mexico whose details are unknown. There is rust, dirt, etc. (NAGAI Michio)
Maintenance Information: 2018.10.24 Conductivity Confirmed
Accessories: none
Power transformer primary: 100-105V secondary: 24-0-24V/0.18A, 6.3V/0.6A, 25-22.5-20-0-20-22.5-25V/2.6A W100 x H80 x D84 mm 3.2 kg (actual measurement, not including protrusions) There is dullness and abrasions on the body with stays (Kojima Yosuke)
Accessories: stay (main unit attached)