The disposal price has been reduced! Member prices are not applicable. 2025/6/27 sales price 238,000 yen Maintained! A popular preamp sold during the heyday of analog. The mid-range is more glossy and has a sexier vibe than those after C29. That rich sound can truly be said to be a preamp representing the golden age of Mackins'. There are small scratches and threads on the exterior. ※The power supply has been changed to an inlet specification. Serial AK1481 (Tamura Eiji)
Maintenance information: 2025.6.27 Maintained (main volume disassembly contact polishing cleaning due to poor contact noise. Disassembly contact polishing and cleaning due to poor tone switch contact. Other switches, volume contact cleaning. Since the RCA terminals are corroded and the shape is different, all terminals have been replaced. Electrolytic capacitor replacement. A power supply circuit capacitor was added to make a hum sound. (Panel cleaning, exterior and interior cleaning.)
Accessories: power cable
Main specifications: 4 input terminals, 4 PHONO input systems, 2 pre-out systems, W430 x H140 x D365 mm, 13.8 kg
The disposal price has been reduced! (Member prices are not applicable) 2025/10/22 sales price 258,000 yen Maintained! A rare preamp sold during the golden age of Macintosh. It is a McKinn preamp with a mild impression compared to the C33, etc., and has an orthodox expression with thick mid-range and well-balanced low frequencies. Equipped with an equalizer function and many input systems, this unit is easy to handle with simple operation. On the exterior, rust can be seen behind the top plate. Also, there is some peeling on the front. Serial JDM 1386 (Tamura Eiji)
Maintenance information: 2025.10.22 maintained (panel peeling correction, each SW/VOL cleaning (main, headphone, equalizer VOL replaced) lamp switch replacement, operation check)
Accessories: No accessories
Main specifications: 5-band tone control preamp phono mm1 system line input 8 systems size W406 x H138 x D330 mm weight 8.2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2025/12/3 sales price 278,000 yen This is one car that has undergone thorough maintenance from exterior polishing to oil finishing, saran net cleaning to the unit network! Popular cork baffle type STIRLING HW Using a 25 cm coaxial unit, this HW has a reputation for its good sense of positioning and sound quality typical of TANNOY with a high texture. Compared to recent Hardedge series, it is supple and has a nice tone. Serial 100395/100515 (Yonejima Satoshi)
Maintenance information: 2025.12.3 maintained (unit maintenance: magnetic circuit gap cleaning center adjustment for both low and high frequencies. Network maintenance: frequency characteristics check, ATT part contact cleaning, terminal cleaning, faston terminal replacement. Exterior repair/polishing/oil finish. Rear baffle repair/painting. (Saran net cleaning/repasting, frame repair)
Accessories: saran net, instruction manual, keys
Main specifications: coaxial 2-way speaker impedance 8Ω maximum input 250W output sound pressure level 90dB W486 x H700 x D310 mm 22 kg
The disposal price has been reduced! (Member discounts are not applicable) 2025/12/6 sales price 398,000 yen Accuphase large clean power supply. It removes distortion and noise from the power supply, stably absorbs sudden load fluctuations, and supplies a constant output at all times. It is a must-have item for those using high-end devices such as fine texture, depth of sound field, and reproduction of afterglow. As for the exterior, there is a scratch on the top plate. Serial H5Y466 (Yonejima Satoshi)
Maintenance information: 2025.12.6 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: rated output capacity 1200VA rated output voltage AC100V rated output current 12A dimensions W465 × H244 × D501 mm weight 41.2 kg
The price has been drastically reduced! 2025/12/10 sales price 1,080,000 yen Speaker system S1 that creates innovative values sent out by MAGICO. The M-COAT model in a special color has arrived. In addition to a 7-inch woofer with a carbon nanotube seat and a driver with a lightweight and strong vibration system, an enclosure using seamless teardrop airgrade aluminum alloy extraction material and cast aluminum material creates a realistic sound image. The exterior is good with no conspicuous scratches. Serial 00215/00216 (Yonejima Satoshi)
Maintenance information: 2025.12.10 good sweep check
Accessories: grill, spike holder, wrench
Main specifications: 2 way/2 speakers sealed floor stand type efficiency 86dB 1W/1m impedance 4Ω W248 x H1170 x D222 mm weight 34 kg
The price has been reduced. 2024/12/18 sales price 69,800 yen Maintained! JBL professional 1" screwdriver It was also installed in the late 4344 model. It is a utility driver that can be used in either 2 or 3 ways because it has a sound with a firm outline, but it doesn't come out too much. There is dullness and tape marks (Oikawa Tetsuji)
Maintenance information: 2024.12.18 maintained (SP terminal, internal wiring replacement, pad dampener deterioration replacement, low range, vibration plate mounting adjustment screw, replacement due to rust, DCR (28615 5/6 ohm vibration plate, no scratches) DCR (28670 5.8 ohm vibrating plate no scratches)
Accessories: none
Main specifications: 800 to 20,000 Hz 16 ohms recommended crossover 800 Hz 110 dB throat diameter 2.5 cm 4.8 kg
The disposal price has been reduced. Member prices are not applicable. 22025.4.7 sales price: 108,000 yen Maintenance has been completed, including 6 output MOS transistors, replacement of 8 other transistors, and disassembly and polishing of selectors. A thick, roomy, warm color premain amplifier. It makes me listen carefully to the music in an authentic style, and it plays female vocals etc. well. It has a built-in MC transformer that is great for those who listen to records. There are small scratches and dullness appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2025.4.7 maintained (6 defective single-channel output MOS transistors replaced, 8 other drive transistors replaced for sound, other speaker relays replaced due to deterioration, other selector switches disassembly contact polishing grease application, other idling, offset electrical adjustment, sound output confirmation for each input/output connection)
Accessories: copy of the manual
Main specifications: Class A output 35W+35W (8Ω) Class AB output 140W+140W (8Ω) 220W+220W (4Ω) phono mm/MC compatible size W465 x H146 x D452 mm weight 23 kg
The price has been reduced. 2025/10/4 sales price 69,800 yen Maintained. Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. There are small scratches and dents on one side of the diaphragm (Oikawa Tetsuji)
Maintenance information: 2025.10.4 maintained (vibration plate installation adjustment, pad dampener and mounting screws replaced due to rust
Dispensing terminal contact part cleaning, terminal part dirt ultrasonic cleaning, insulation bushing deterioration replacement, vibrating plate stain cleaning
DCR (60983 6.2 ohm vibrating plate with small scratches) (63530 6.6ohm s vibrating plate with small dents)
Accessories: none
Main specifications: 1 inch driver 500 to 20,000 Hz 8 ohms (DCR 40757/5.7 ohm 46314/5.8 ohm) W145 x D97 mm 5.1 kg/book
The price has been drastically reduced. 2025/10/28 sales price 59,800 yen Maintained including diaphragm (16 ohms) replacement. Coral mid-range and treble drivers are deeply popular. Please enjoy the delicate sound that is made in Japan. Also, it can be attached to a JBL 1-inch horn without using an adapter. There are small scratches, paint peeling, etc. (Oikawa Tetsuji)
Maintenance information: 2025.10.9 maintained (diaphragm replacement, installation adjustment, impedance matching 16 ohm DCR (9965 10.8 ohm diaphragm small scratches) (9966 10.9 ohm diaphragm small scratches)
Accessories: none
Main specifications: Throat diameter 25.4 mm (1 inch) playback frequency band 500 to 18,000 Hz impedance 16 ohms maximum input 150 W sound pressure 105 dB W116 x H116 x D104 mm 4.2 kg
The disposal price has been reduced. Member prices are not applicable. 2025/10/30 sales price 79,800 yen A driver horn that combines the company's 1-inch driver with an 18Sound horn and XT1086. The horn has an oval shape and is made of die-cast aluminum. The clear sound with good response is attractive. Please enjoy it according to your favorite woofer (Oikawa Tetsuji)
Maintenance information: 2025.10.16 Operation confirmed
Accessories: none
Main specifications: DE500:1 inch driver, 8 ohms, 107 dB input, 50/100 W, frequency characteristics, 1000 to 18000 Hz, recommended crossover, 1.5 kHz, W105 x D65 mm
XT1086:800 Hz cutoff frequency for 1 inch W260 x H215 x D126 mm
※The lid of the remote control is missing, so it's cheap. Maintained in 2014. A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function) and high pass and low pass filters (2 levels each), which is convenient. The exterior has line scratches on the top plate and other scratches overall (Mizusaki Ryo)
Maintenance information: 2025.8.14 operation confirmed
2014.12.13 Maintained (disconnected due to AC fuse deterioration → replaced. Check internal capacitors, relays and transistors → OK. Since the remote control switch cannot be dismantled, it cannot be cleaned. Operation check OK)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input (mm) W321 x H80 x D255 mm 3.3 kg
Maintained by Luxman Service in 2018! *Inexpensive because the remote control is missing, the paint on the power switch has fallen off, and the cabinet is scratched. Lux mid-level class premain. Equipped with a warm colored VU meter. It has a strong low frequency that exceeds the output, and a soft sound typical of a lux (Sasaki Shota)
Maintenance information: 2018.9.2 manufacturer maintained (replaced due to poor contact with input selector SW. The volume was replaced due to poor VR contact. The pretector relay was replaced due to poor contact. The meter lamp was replaced due to deterioration. idling current adjustment. Operation test)
Accessories: Universal power cable
Main specifications: 100W+100W (8Ω) size W467 x H179 x D440 mm 20 kg
The disposal price has been reduced. Member prices are not applicable. 2025/8/8 sales price 99,800 yen Maintained! JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and excellent reality no matter which one you take. There are scratches and stroke marks all over (Kojima Yosuke)
Maintenance information: 2025.8.8 maintained (vibration plate installation adjustment, installation screw replacement, pad dampener replacement terminal ultrasonic cleaning
DCR (SN:88607/8.3 ohm/vibration plate without scratches)
(SN:63434/8.3 ohm/vibrating plate without scratches)
Accessories: none
Main specifications: 2 inch driver, slot diameter: 5 cm; allowable input: 100 W; sound pressure level: 111 dB; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/bottle
Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance even when combined with various woofers and tweeters (Eternity Miraito)
Maintenance information: 2025.11.14 Maintained (one side is not original, so it was replaced and adjusted to JBL's original D16R2420
Pad dampener, vibrating plate mounting screw rust replacement
Insulating bushing deterioration replacement
DCR (25555 5.6 ohm vibrating plate, scratch pear)
(25561 5.3 ohm vibrating plate with no scratches))
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been reduced. 2025/10/16 sales price 89,800 yen Maintained. JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and excellent reality no matter which one you take (Oikawa Tetsuji)
Maintenance information: 2025.10.16 Maintained (vibration plate installation adjustment, insulation bushing deterioration replacement vibration plate, terminal cleaning
Pad dampener replacement DCR (23523 7.7 ohm vibrating plate scratch) (23567 7.9 ohm vibration plate scratch free)
Accessories: none
Main specifications: 2 inch driver, slot diameter: 5 cm; allowable input: 100 W; sound pressure level: 111 dB; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/bottle
The disposal price has been reduced. Member prices are not applicable. 2024/12/16 sales price 128,000 yen Internal thorough disassembly, cleaning & replacement of deteriorated parts! UREI's 27-band graphic equalizer. It is only for commercial use, and is useful in clubs, halls, etc., and of course there are many bands, but there is little sound loss, and it works well in the band you really want, so you can create your favorite sound. The exterior is generally dull and has scratches (Oikawa Tetsuji)
Maintenance information: 2024.12.16 Maintained (serial NO4480 has 13 slider pot resistors replaced and slider pot resistor connection defects repaired. Also, the movement of the knob is heavy and astringent even when grease is applied. There are good ones, but please be aware that the knobs are long and structurally poor. (Gain changeover switch and slope switch replacement x 4, serial No. 3391 has good cleaning procedures, XLR wiring correction procedures, sound output tests after gain installation, and changes for each band due to insufficient gain volume)
Accessories: copy of the manual
Main specifications: 27 bands (20 Hz to 20 kHz) mono graphic EQ W482 x H90 x D205 mm 5.3 kg/unit
The price has been reduced. 2025/11/26 sales price 45,000 yen ※1 bottle only. Comes with a rubber stand GENELEC POWERED MONITOR SPEAKER. It is an ideal near-field system for monitoring. The high-rigidity aluminum enclosure not only looks good, but also enables a perfect listening experience. It is in good condition without major damage (Oikawa Tetsuji)
Maintenance information: 2025.11.26 Operation confirmed
Accessories: power cable, rubber stand
Main specifications: frequency characteristics 58Hz-20kHz (-6 dB) amplifier output LF40W/HF40W output sound pressure level 108 dB H285 × W189 × D178 mm weight 5.6 kg
The disposal price has been reduced. Member prices are not applicable. 2025/11/11 sales price 90,000 yen with original box D/A A/D audio interface. Equipped with a USB 2.0 high-speed bus optimized to achieve uncompromising high performance on Windows and macOS. All settings can be changed in real time. This product realizes professional specs that were impossible with a typical USB audio interface. There are no particularly noticeable scratches on the exterior (Oikawa Tetsuji)
Maintenance information: 2025.11.11 operation confirmed (sound test OK up to 192 kHz with SPDIF and USB)
Accessories: instruction manual, power cable, connection cable, original box
Main specifications: All input/output 24 bits/192 kHz USB 2.0 terminal x 1 analog input analog line input x 6, high end microphone pre/line input x 2 analog output analog line output x 8 digital input ADAT input x 1 · SPDIF coaxial input x 1 size W265 x H44 x D165 mm weight 1.5 kg ※ Please check the manufacturer's website for detailed specifications.
The price has been reduced. 2025/12/5 sales price 99,800 yen GENELEC powered monitor speaker. It is an ideal near-field system for monitoring. The high-rigidity aluminum enclosure not only looks good, but also enables a perfect listening experience. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2025.12.5 operation confirmed
Accessories: brand new stand, power cable
Main specifications: frequency characteristics 58Hz-20kHz (-6 dB) amplifier output LF40W/HF40W output sound pressure level 108 dB H285 × W189 × D178 mm weight 5.6 kg
The price has been drastically reduced. 2025/11/30 sales price 80,000 yen A line transformer using the T-965 from German HAUFE. I tested the sound output with Fourplay's Bali Run, and I have the impression that the low frequency graininess of bass drums has improved, and the sound separation has improved in high frequencies such as hi-hats. It is an item that can easily improve sound quality (Daiki Goto)
Maintenance information: 2025.11.30 Maintained (· transformer attached to chassis (fixed with screws) · input/output terminals and ground terminals added. (It was determined that it was a T-965 line transformer (1:1 boost ratio) from HAUFE (made in Germany).)
Accessories: none
Main specifications: Weight 700g (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2025/6/3 sales price 89,800 yen Manufacturer maintained! This is a classic record player for DENON's famous machines of yesteryear. This is a cost performance model of the DP-5000 that uses a direct drive servo turn tape and achieves a stable speed of rotation. Equipped with the SME3009S2imp, which is dedicated to light needle pressure but boasts excellent tracing performance, you can listen to record playback with a sense of stability.
Maintenance information: 2025.6.3 manufacturer maintained (capacitor and transistor replacement around the head amplifier. 33/45RPMSW, STOPSW, LEAF SW CLEANING Speed adjustment, operation test.)
Accessories: copy of the manual
Main specifications: DP-3000 servo type direct drive speed 33, 45 rpm 3009S2IMP: short arm for light needle pressure, static balance type, needle pressure 0 to 1.5 g, cartridge weight 4 to 9 g, DK-100 cabinet, Rawan material 70 mm, laminated plywood size W530 x H170 x D420 mm
The price has been reduced. 2025/11/13 Sales price 59,800 yen Maintenance has been completed, including connection cable creation, sensitivity checks, etc. A super rare FM tuner with name audio. 100V is a Japanese band. The size of the antenna terminal in Japan is also slightly larger than the model. There is a line wound on the top plate (Oikawa Tetsuji)
Maintenance information: 2025.11.13 Maintained (F cover, sensitivity check, display check OK, connection cable created)
Accessories: connection cable, adapter
Main specifications: W435 x H65 x D310 mm 4.6 kg (actual measurement)
The price has been drastically reduced! 2025/12/10 sales price 2,780,000 yen with dedicated stand! The color is the special color Bororo Red. It is a brand founded by the designer of the first generation Nautilus, and the visual impression is somewhat reminiscent of Nautilus. Of course, the sound is also beautiful, like a Nautilus, and it beautifully expresses a large space. It's a speaker where you can even feel the singer's real breath. There are small scratches on the exterior. Serial 3993/3994 (Tamura Eiji)
Maintenance information: 2025.12.10 sweep check OK
Accessories: dedicated stand (https://stella-inc.com/vivid/page/base_g3g4.html)、スパイク、スパイク受け、取扱説明書、ジャンパーケーブル
Main specifications: 4 way 5 speaker tube absorber bass reflex system 88 dB 6 ohm frequency band 29 to 36,000 Hz maximum allowable input 800 W (music power) W360 x H1383 x D638 mm weight approx. 55 kg stand part: W330 x H160 x D460 mm weight approx. 12 kg
The price has been reduced! 2025/12/11 sales price 250,000 yen Maintained! This is the 2010 version of the SV-2. This time it will be the 211 model. Compared to the 2007 model, it has a plump and glossy sound like a vacuum tube amplifier. There are also 4 input systems, so it's easy to use. There are scratches and paint peeling on the exterior. (TAMURA Eiji)
Maintenance information: 2025.12.11 Maintained (input volume and function switch replacement, bonnet fixture, vacuum tube pin cleaning, solder correction. ※Bias check Each input and output sound was checked. Output approx. 9 W (8 ohms))
Accessories: instruction manual, power cable, bonnet
Main specifications: 4 input systems with volume W410 x D408 x H251 mm weight 35 kg
Maintained! This is the company's best-in-class 845 single power amplifier, which has a strong visual presence. It is a high quality vacuum tube power amplifier with an impressive pure sound, even though no stinging sound is felt at all. There are small scratches and dullness on the exterior. Serial 77374 (Tamura Eiji)
Maintenance information: 2025.12.12 Maintained (replacement voltage amplifier part, earth pattern correction, solder correction, vacuum tube pin cleaning, board position correction due to decoupling capacitor coating deformation ※ bias check output audio check (output approx. 20W confirmed). 6SN7 → 300B → 845 single (self-biased))
Accessories: power cable, instruction manual
Main specifications: 300B x 2 x 845 x 2 6NS7EH x 2 300B drive UV-845 single power amplifier 20W+20W damping factor 4 or more power consumption 400W size W470 x H305 x D420 mm 42.1 kg
Maintained! Mcintosh tube FM tuner MR71 The sound unique to FM broadcasts has an appeal different from CDs and records, and the FM sound with a thick, sweet Macintosh sound is exceptional. The exterior has oxidation, scratches, etc. Serial 3181 (Fujisawa Yukishi)
Maintenance information: 2025.12.12 Maintained (tube all pin polishing. Replace the filter capacitor in the power supply section. Output coupling capacitor replacement. F cover sensitivity readjusted. internal and external cleaning)
Accessories: No accessories
Main specifications: frequency characteristics 20Hz to 20kHz SNR 70dB separation 35dB harmonic distortion ratio 0.5% output level 2.5V W407 × H138 × D335 mm weight 14.5 kg
This is the current Marantz reference SACD player that will be in stock for the first time in Hi-Fi. Equipped with a new-generation HDAM circuit. It is a model that can be said to be the culmination of the past, and incorporates all Marantz technology. Sound that is faithful to the original sound is reproduced while keeping the breadth and high resolution intact. It's a player who brilliantly recreates a vast stage when you close your eyes. Serial MCPC112400004 (Tamura Eiji)
Maintenance information: 2025.12.12 operation confirmed
Accessories: instruction manual, original box, remote control, connection cable
Main specifications: Output terminals: analog unbalance x 1, analog unbalance x 1, coaxial digital x 1, headphone x 1, headphone x 1 input terminals: coaxial digital x 1, optical digital x 1, USB-B x 1, W440 x H192 x D442 mm, weight 33.0 kg
The price has been drastically reduced! 2025/12/9 sales price 128,000 yen Maintained by Triode! This model is equipped with an MM phono equalizer and is compatible with a remote control for volume adjustment. In addition to dividing the transformer into 3 parts, changes have also been made, such as omitting the PRE-IN terminal, and the power supply LED is orange. In addition to the firm extrusion characteristic of vacuum tube amplifiers, it is a product with a delicate and clear tone. The exterior has scratches and dullness. Serial 12060535 (Fujisawa Yukishi)
Maintenance information: 2025.12.9 manufacturer maintained (selector polishing, volume replacement, remote control repair)
Accessories: remote control, instruction manual, power cord
Main specifications: KT88EH x 4, 12AX7 x 1, 12AU7A x 2 output 45W+45W W340 x H185 x D315 mm 15 kg
The price has been reduced! 2025/10/24 sales price 19,000 yen ※The cantilever is leaning to the left. A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that it has a high output and can be used without a step-up transformer. Serial 6971 (Fujisawa Yukishi)
Maintenance information: 2025.10.24 Operation confirmed
Accessories: No accessories
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
The disposal price has been reduced! (Member prices are not applicable) 2025/11/5 sales price 148,000 yen ※50 Hz specification 33 rotations only. armless model. It is a double belt drive to isolate the vibration of the motor. There are belts on the back and front sides, and belts are used from the motor to the pulley, and belts are also used for the pulley → platter. The hole diameter of the arm will be 29mm. The exterior has dirt, threads, and writing on the plate. Serial 8982 (Tamura Eiji)
Maintenance information: 2025.11.5 rotation confirmed (it will flow slightly, but this is the current state)
Accessories: belt
Main specifications: hole diameter 29mm W502 x H250 x D453 mm