Audio-Technica universal tone arm for broadcast stations The lead wire inside the arm uses silver wire with a Teflon coating. This is such a masterpiece arm that was later reprinted for a limited time. The exterior is slightly dull, but it is good for the model year. (FUJISAWA KOSHI)
Maintenance information: 2026.3.22 continuity confirmed
Accessories: copy of instruction manual, connection cord, armrest, hex wrench
Main specifications: static balance type, execution length 257 mm, compatible cartridge, 13.5 to 33 g (including shell), needle pressure range 0 to 3 g
A universal tone arm equipped with an inside force cancellation mechanism with a special structure that combines two cams. Due to the special structure that combines the two cams, cancellation corresponding to the geometric positional relationship of the arm can be performed. There are small scratches etc. on the exterior. (Ryuichiro Kaneko)
Maintenance information: 2026.3.23 continuity confirmed
Accessories: phono cable
Main specifications: Universal tone arm, effective length 235 mm, overhang, 14 mm, offset angle, 21 degrees, tracking error, 1.75 degrees, front and rear needle pressure 0 to 3 g, variable direct reading, applicable cartridge weight (depending on 4 types of weight), 4 g to 35 g
The disposal price has been reduced! (Member prices are not applicable) 2026/2/26 sales price 148,000 yen ※It is cheap because there are a few dents in the arm pipe. Phono cable is missing. Maintained! A popular classic model with a long arm. It is precise and delicate, and in addition, it has a very smooth and loud sound, which clearly shows the characteristics of a long arm. It is a versatile arm that can handle various weights and needle pressures, from lightweight to heavyweight. The exterior has dullness, threads, and dents on the arm pipes. Serial 08519R (Satoshi Yonejima)
Maintenance information: 2026.2.26 Maintained (IFC yarn production replacement. Arm disassembly and cleaning. (Conductivity check between headshell terminals and RCA terminals)
Accessories: No accessories
Main specifications: long arm static balance, total length: 400 mm, execution length: 307.3 mm, heavy needle pressure compatible, compatible cartridge, 9.5 to 34 g, needle pressure adjustment: 0 to 5 g
The price has been reduced! 2026/3/5 sales price 49,800 yen ※It is cheap because it has oxidation and rust. A representative model of Saek, using a double knife edge. It has a reputation for clear sound and accurate sound image localization, and is still popular today. The exterior is rust-resistant and oxidized. (YONEJIMA Satoshi)
Maintenance information: 2026.3.5 operation confirmed
Accessories: phono cable
Main specifications: double knife edge static balance universal type, total length 329 mm, effective length 240 mm, overhang 5 mm, needle pressure 0 to 2 g
※6 month warranty This is an oil dump tonearm with high traceability. Simple and sophisticated design The low frequencies are stable and resonate clearly (Oikawa Tetsuji)
Maintenance information: 2026.3.8 continuity confirmed
Accessories: armrest, phono cable
Main specifications: one-point support, oil dump system, total length: 323 mm, execution length: 237 mm, overhang: 15 mm, tracking error, needle pressure range: 0 to 3 g (0.1 steps), cartridge dead weight: 3 to 17 g
*Currently sold. Commercial tone arms used at broadcasting stations, etc. This is an authentic arm with gold plated on all contact parts, including the contact part of the 4P connector. This is a non-genuine phono cable. There is dullness throughout the exterior (Tomoho Asaine)
Maintenance information: 2026.3.3 sound output confirmed
Accessories: phono cable
Main specifications: static balance type, total length: 348 mm, effective length: 244 mm, needle pressure range: 0 to 3 g, height adjustment range: 35 mm to 70 mm, compatible cartridge weight: 4 to 15 g