※1 bottle only. Unspecified 1" horn. The screw slot has 3 and 4 smaller screw holes, and the previous owner installed the FOSTEX FD600. There are many stains and rust all over (Murakoshi Yoichi)
Accessories: none
Main specifications: opening diameter 73 x 350 mm W380 x H11 x D235 mm 1.2 kg
1 bottle only. This slot is compatible with D-1250 with YL acoustics. If you are looking for one, please take this opportunity. The exterior has scratches, dents, etc. due to aging (Asaine Tomoho)
Accessories: none
Main specifications: size W140 x H460 x D140 mm driver side opening φ75 mm horn side opening 75 x 75 mm weight 3.5 kg (actual measurement)
This is the rising throat on the left side of the LH-5. If you are looking for one, please take this opportunity. The exterior has scratches, dents, etc. due to aging (Asaine Tomoho)
Accessories: none
Main specifications: size W307 x H1436 x D355 mm upper opening 198 x 250 mm lower opening 110 x 150 mm weight 17.8 kg (actual measurement)
This is the throat at the left and right joints at the top of the LH-5 opening. If you are looking for one, please take this opportunity. The exterior has scratches, dents, etc. due to aging (Asaine Tomoho)
Accessories: none
Main specifications: size W905 x H275 x D360 mm driver side opening 200 x 250 mm horn side opening 270 x 250 mm weight 13.5 kg (actual measurement)
This is the part at the top of the LH-5 opening. If you are looking for one, please take this opportunity. The exterior has scratches, dents, etc. due to aging (Asaine Tomoho)
Accessories: none
Main specifications: size W910 x H360 x D965 mm upper opening 275 x 250 mm lower opening 795 x 250 mm weight 31.3 kg (actual measurement)
This is the first part to connect to the LH-5 slot, 16-S. If you are looking for one, please take this opportunity. The exterior has scratches, dents, etc. due to aging (Asaine Tomoho)
Accessories: none
Main specifications: size W185 x H540 x D220 mm driver side opening 73 x 73 mm horn side opening 73 x 110 mm weight 3.9 kg (actual measurement)
This is a slot that connects to the bottom of the LH-5. If you are looking for one, please take this opportunity. The exterior has scratches, dents, etc. due to aging (Asaine Tomoho)
Accessories: none
Main specifications: size W1350 x H180 x D220 mm driver side opening 73 x 105 mm horn side opening 152 x 110 mm weight 11.9 kg (actual measurement)
The price has been reduced. 2025/8/31 sales price 250,000 yen Bending horn imitating MB-70 with YL acoustics. The company's D-1250 driver was compatible with the throat adapter. I felt a tight bass that was strong but didn't make me feel heavy. There is a feeling of use on the exterior due to scratches, dullness, dirt, etc. ※Buttsugo (Tamai Jun)
Accessories: none
Main specifications: horn opening dimensions W670xH975mm overall dimensions W670xH1890xD654 mm weight 39 kg (actual measurement)
The disposal price has been reduced! (Member prices are not applicable) 2025/7/27 sales price 59,800 yen JBL's large professional radial horn. Attach a 2 inch driver such as the 2440 and enjoy the exhilarating sound. The strong sound pressure that comes straight out is impressive. It is also recommended as an introduction to large horns. Condition There are dull stains and scratches over time (Yamato Yuki)
Accessories: none
Main specifications: crossover frequency 500 Hz horizontal 90 degrees vertical 40 degrees W800 × H615 × D 215 mm 13.8 kg/book 11.3 kg
Self-made wood horn. JBL2329 was attached to the slot. There are small scratches, writing, dirt, etc. (Oikawa Tetsuji)
Accessories: Throat Screws
Main specifications: W778 x H538 x D652 mm 9.7 kg (actual measurement)
The price has been drastically reduced. 2025/7/15 sales price 20,000 yen. This is an Altec 1.5 inch horn such as 288. It's a sound with vertical momentum, and although it's not a wide range, the energetic sound is exquisite. In addition to the exterior and additional holes being drilled in the throat on one side, there is no manufacturer's seal, dullness, scratches, etc. and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main Specifications: Mantaray Horn Polyester Fiberglass Recommended Crossover 500 Hz Compatible Units: 288 · 291 Series W324 × H327 × D317 mm 1.6 kg
The price has been drastically reduced. 2025/7/23 sales price 19,800 yen. A short bi-radial horn that is light and easy to use. It has a light sound loss, and you can enjoy a good sound that won't be lost even when paired with a larger system. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Bi-radial horn cutoff 400 Hz horizontal 90 degrees vertical 40 degrees foam resin W445 x H279 x D236 mm baffle opening dimensions W403 x H238 mm (front mount) baffle plate W590 x H400 mm 3.9 kg
The price has been drastically reduced. 2025/8/13 sales price 25,000 yen. Currently sold. Compact radial horn. Three screws with the same pitch as a JBL compression driver, etc. with a 2.5 cm throat diameter can be attached. In addition to the exterior and dead rubbing, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W552 x H187 x D394 mm 9.4 kg
The price has been drastically reduced. 2025/7/15 sales price 24,000 yen. Bi-radial horn for JBL 2" drivers Compared to depth, the large opening makes a light and open sound. You can see a feeling of use on the exterior, damaged stickers on one side, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: screws
Main specifications: 2-inch bi-radial horn cutoff 400Hz horizontal 60 degrees vertical 40 degrees throat diameter 5 cm W445 x H279 x D236 mm 2.2 kg
※1 bottle only. The horn used in the company's CP12II. Details are unknown. According to actual measurements, the throat diameter is 42 mm and the screw pidge is 104 mm.
Accessories: none
Main specifications: W300 x 205 x D165 mm 700 g throat diameter 42 mm screw fidge 10.4 mm (actual measurement)
The price has been reduced. 2025/7/13 sales price 39,800 yen The paint is peeling and there is a lot of corrosion, so it's cheap. JBL professional beehive horn. It has a unique sound that resonates well, and in particular, the sound of a piano has a wonderful sense of realism, just like listening to live music. It is used for high frequency playback of 1.2 kHz or higher, but it can be used for high frequencies in 2 to 3 way systems. (Sasaki Shota)
Accessories: none
Main specifications: crossover frequency 1.2 kHz, directivity 90 degrees, sound pressure level 109 dB, throat diameter 2.5 cm, diameter 133 x depth 197 mm, 2.7 kg
The price has been reduced! 2025/8/5 sales price 39,800 yen 2 inch electric voice horn. It's made of resin, so it's not as tough as metal, and you can listen to a three-dimensional sound that is easy to hear. It is a convenient specification that allows a JBL 2-inch driver to be attached (Yamato Yuki)
Accessories: none
Main specifications: 2 inch horn driver directionality/horizontal 90° (500 to 20 kHz) vertical 40° (1200 Hz to 20 kHz) mounting part outer diameter: 128 mm (actual measurement) throat diameter: 50 mm (actual measurement) screw pitch (diagonal) 102 mm (actual measurement) W534 x H333 x D278 mm (actual measurement) 3.0 kg (actual measurement)
The price has been reduced. 2024/9/25 selling price 20,000 yen horn with unknown details. The diameter of the driver mounting hole is about 32 mm (actual measurement) (Oikawa Tetsuji)
Main specifications: W197 x H118 x D100 mm weight 380 g/1 bottle