Maintained! An A-shell oval needle characterized by the SPU's original direct sound. The tight, powerful mid and low frequencies and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. Serial 744943 (Tomonori Asaine)
Maintenance information: 2025.7.25 Maintained (damper adjustment, printed board contact failure)
Accessories: none
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms
Maintained! The standard mono needle and the highest peak CG25D is now in stock. A precise, thick, and thick sound. The unique sense of density, which is different from stereo needles, is attractive. The exterior is dull. Serial 400628 (Tomoho Asaine)
Maintenance information: 2025.7.25 Maintained (damper replacement, coil adhesion training, contact cleaning)
Accessories: needle cover
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g; dead weight: 31 g
The price has been reduced. 2025/7/23 sales price 150,000 yen Reference cartridge, the highest-grade step-up transformer designed to fit the MC2000. Furthermore, the T-3000, T-5000, and T-7000 continue at the top, but it feels good that this T-2000 has the thickest mid-range and has a strong, heated tone. There is a lot of rust on the exterior (Murakoshi Yoichi)
Maintenance information: 2025.7.23 sound output confirmed
Accessories: none
Main specifications: primary impedance 3 ohm toroidal core size W80 ✕ H58 ✕ D 180 mm weight 3.5 kg
※The needle cover is missing, and the shell and finger holder are dull and dirty. An A-shell elliptical needle characterized by the SPU's original direct sound. The tight, powerful mid and low frequencies and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. Both the cantilever and stylus are good (Oikawa Tetsuji)
Maintenance information: 2025.7.24 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
The price has been reduced. 2025/7/17 sales price 49,800 yen Good stylus and cantilever! This is an orthophone MC cartridge with an impressive sturdy body. There is a lot of information, and it can easily pick up even delicate parts that have been hidden until now. It also has excellent resolution, and it is a reliable MC cartridge that can handle any genre perfectly. Slight dullness can be seen on the body. (FUJISAWA KOSHI)
Maintenance information: 2025.7.17 operation confirmed
Accessories: needle cover
Main specifications: frequency band 20 to 20 khz output 0.2 mv impedance 3 ohms needle pressure 1.7 g dead weight 9 g
The price has been reduced! 2025/5/22 sales price 52,800 yen SPU-GE reprint model. This is a popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges. Externally, there is a slight tear in the rubber at the base of the needle. Serial 548576 (Tamura Eiji)
Maintenance information: 2025.5.22 operation confirmed
Accessories: needle cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
G-shell elliptical needle model. The glossy, rich, and heavy sound has an appeal that won't fade. It is an eternal cartridge that fully conveys the appeal of analog. The exterior has a feeling of use such as dullness due to aging. Serial 945035 (Tomonori Asaine)
Maintenance information: 2025.7.19 sound output confirmed
Accessories: needle cover
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It is light in weight and is compatible with various cartridges and tonearms. You can see the exterior, dullness, and feeling of use (Tomoho Asaine)
Maintenance information: 2025.7.19 Continuity confirmed
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
2M series RED. The lackluster sound typical of an orthophone is attractive. The exterior is dull and has a feeling of use (Tomoho Asaine)
Maintenance information: 2025.6.15 Operation confirmed
Accessories: needle cover
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
Component cable 2.0m RGB-D terminal is a high class cable from Alt von Bala with thick, high-purity silver coated on a specially selected Higher-OFC conductor. Although unused, it is attached to the case and there is yellowing (Murakoshi Yoichi)
Maintenance Information: Unopened
Accessories: case
Maintained! The SPU-A without shell is now in stock! It is characterized by a thick mid-low range, as shown by the speckle-shaped frequency characteristics. It's a supple, unaudible sound (Daiki Goto)
Maintenance Information: 2025.7.17 Maintained (damper adjustment, cleaning.)
Accessories: none
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms
Maintenance such as transformer replacement has been completed! SPU round needle type with built-in transformer. The rich, rich SPU-like sound is attractive. There is a feeling of use (Daiki Goto)
Maintenance information: 2025.7.17 Maintained (transformer secondary coil disconnected, transformer replaced.)
Accessories: none
Main specifications: MC type with built-in transformer, output 10 mV, needle pressure 3 to 4.5 g, dead weight 32 g
The price has been reduced. 2025/7/8 sales price 49,800 yen The needle cover is missing, and the cantilever is slightly leaning to the left, so it's cheap. It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S is a cartridge that uses a round needle, and a wide range is also added. Serial 634545 (Murakoshi Yoichi)
Maintenance information: 2025.7.5 sound output confirmed
Accessories: none
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
The price has been reduced. 2025/4/19 sales price 99,800 yen Maintained! Mono cartridge CA25D. One of the pinnacle of mono needles. The density peculiar to mono needles, which is not found in stereo needles, is attractive (Daiki Goto)
Maintenance information: 2025.4.19 Maintained (damper replaced, coil glued)
Accessories: original box
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g; dead weight: 31 g
The disposal price has been reduced! (Member discounts are not applicable) 2025/6/9 sales price 15,000 yen M type orthophone shell with a shallow moat of the G shell. Lead wires and mounting screws are not included. (FUJISAWA KOSHI)
Maintenance information: 2025.6.9 continuity confirmed
Accessories: No accessories
Main specifications: dead weight 10g
M type orthophone shell with a shallow G shell moat. Overall there is dullness (Oikawa Tetsuji)
Maintenance Information: 2025.7.1
Accessories: none
Main specifications: dead weight 10g
RCA cable, 1.0 m pair, 7N copper conductor, two-core shield structure. Unlike recent cables, it is characterized by a rich characteristic of the attractive 7N material. There is a feeling of use such as dullness (Yamato Yuki)
Maintenance information: 2025.7.1 continuity confirmed
Accessories: none
※The sound output has been confirmed, but since the shell is not original, it is cheap. It is the successor to the MC cartridge masterpiece SPU GE. This is an ambitious work that aims to expand the high range by using silver wire as the power generation coil. It is a GOLD version where you can enjoy attractive sound quality, with a delicate feeling added to conventional wild tones. As for the exterior, there is an overall feeling of use, such as the cantilever being tilted to the right, the needle cover is damaged, the shell has been replaced with a normal G shell and the paint is peeling off, and there is no lid on the original box (Mizusaki Ryo)
Maintenance information: 2025.6.25 sound output confirmed
Accessories: none
Main specifications: MC type elliptical needle output voltage 0.2 mV playback frequency band 20 to 20,000 Hz load resistance 10 ohms or more impedance 3 ohms needle pressure 3.0 to 4.5 g dead weight 32 g
G-shell elliptical needle model. The glossy, rich, and heavy sound is an appeal that never fades. It is an eternal cartridge that fully conveys the appeal of analog. The exterior is dull due to aging, and there is a feeling of use (Sasaki Shota)
Maintenance information: 2025.6.10 Sound output operation confirmed
Accessories: nothing
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
Cartridges optimized for DJs Highly resistant to scratches and back queuing for DJs, perfect for DJ use (Daiki Goto)
Maintenance information: 2025.6.5 operation confirmed
Accessories: none
Main Specifications: Output voltage: 6mV Channel separation: 20dB (@1kHz) Frequency band (at -3dB): 20-20,000 Hz Appropriate needle pressure: 3g Dead weight: 18.5g
The price has been reduced. 2025/4/5 sales price 74,800 yen ※Since the screw hole on one side is crushed, it is fixed to the shell with a screw on one side only. An A-shell oval needle characterized by the SPU's original direct sound. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. Both the cantilever and stylus are good (Oikawa Tetsuji)
Maintenance information: 2025.4.1 operation confirmed
Accessories: needle cover, original box
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
The price has been reduced. 2024/7/21 sales price 1,200 yen. ※1 bottle only. Speaker cable is a 1.5m 6N/5N high-purity copper hybrid multi-conductor cable, and is Ortofon's low cost model. There are scratches and dullness on the shield (Takasaki Atsushi)
Maintenance information: 2024.7.21 continuity confirmed
Accessories: none