TT-71 is mounted in a self-made transparent cabinet. The previous owner had UA-5045 attached to the arm. The younger brother of the Quartz Rock DD turntable TT-81. It is an orthodox phono motor with a high degree of stability. ※Since it does not stand on its own, it is on top of the insulator. There is a feeling of use on the exterior such as scratches and dullness (Tamai Jun)
Maintenance information: 2025.9.2 operation confirmed
Accessories: insulator (audio-technica AT606J)
Main specifications: FG detection quartz lock, DC servo, direct drive
* Since there were no problems with the operation confirmation, it will be sold as is. A nostalgic Victor record player. The yellow wood cabs evoke the nostalgia of that time. The sound is well-balanced, neither too hard nor too soft. There is a feeling of wear on the exterior, such as scratches and dullness. Serial 11011264 (Tamai Jun)
Maintenance information: 2025.9.6 sound output confirmed
Accessories: none
Main specifications: Dimensions W490 x H190 x D410 mm Weight 10.5 kg
※The finger strap is missing. A headshell with a thick aluminum body and resin finger rests. It is built to be completely free of resonance, and the sound is of high quality and has clear sound quality with high vibration damping. You can see a feeling of use such as dullness and small scratches on the exterior (Tamai Jun)
Main specifications: Molten aluminum, forged, dead weight 13.4 g
A headshell with a thick aluminum body and resin finger rests. It is built to be completely free of resonance, and the sound is of high quality and has clear sound quality with high vibration damping. There are spots and small scratches on the exterior (Wang Zhan)
Accessories: none
Main specifications: Molten aluminum, forged, dead weight 13.4 g
This is a pulley for Victor's belt drive player, JL-F30. Whether it is 50 Hz or 60 Hz is unknown, operation has not been confirmed (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: none
Main specifications: length 27 mm, shaft hole diameter 2 mm, maximum part width approx. 7 mm (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2025/3/12 sales price 59,800 yen Maintenance completed! Built-in head amplifier composed of 6 FETs. A famous amplifier that doesn't have a strong personality, but it has natural sound quality and is easy to hear. You can see the exterior, rust, dullness, abrasions, etc., and a feeling of use. Serial 15203056 (Kobayashi Hitoshi)
Maintenance information: 2025.3.12 maintenance completed (balance volume replacement treble, bus volume dismantling and cleaning ③ switch dismantling and polishing grease application (phono selector, imp selector, rec selector, muting, subsonic, tape monitor, mode, tape 23) ④ flat amplifier, power supply capacitor replacement ④ solder repair ⑤ leg installation ⑥ interior and exterior inspection cleaning, pin jack polishing, other volume cleaning, operation confirmation
Accessories: none
Main specifications: PHONO3 system (of which MC1 system) W480 x H111 x D342 mm 5.8 kg
Operation has not been confirmed. Replacement needle for VICTOR MD-1016 and DIATONE MAG-1 There is a feeling of use (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: none
The current operation is OK. We sell it as is, without warranty. There are scratches and stains on the exterior. (TERAMOTO Yoshihiko)
Maintenance information: 2025.5.24 operation confirmation ok
Accessories: dust cover
Main specifications: 33/45 rotation TH system, static balance type, direct drive, needle pressure 0 to 3G, 50/60 Hz compatible, W490 x H190 x D410 mm, 10.5 kg
The current operation is OK. We sell it as is, without warranty. There are scratches and dirt on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.5.19 operation confirmation ok
Accessories: dust cover
Main specifications: FG detection double servo quartz coreless DC direct drive speed 33 1/3, 45 rpm, variable needle pressure range 0 to 3.0 g, mounting cartridge weight 14.5 g to 24 g (including shell) W480xH169xD436 mm 10.5 kg
The current operation is OK. We sell it as is, without warranty. There are scratches and stains on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.4.22 operation confirmation ok
Accessories: special shell, dust cover
Main specifications: fully automatic player, 33/45 rotation, variable needle pressure range: 0 to 3 g, mounting cartridge weight: 4.5 to 9 g, headshell weight: 4.7 g, W435 x H161 x D376 mm, 9.5 kg
The weight axis of the arm sags a lot, but the current operation is OK. We sell it as is without warranty. There are scratches and stains on the exterior. (TERAMOTO Yoshihiko)
Maintenance information: 2025.4.6 operation confirmation OK (the weight axis of the arm is sagging a lot)
Accessories: dust cover
Main specifications: direct drive quartz lock W481 x H169 x D398 mm 14 kg
The current operation has been confirmed, but since the weight shaft of the arm sags slightly, there is no guarantee, and it is sold as is. There are scratches and stains on the exterior. (TERAMOTO Yoshihiko)
Maintenance information: 2025.4.5 operation confirmation ok (there is a slight sagging on the arm weight axis)
Accessories: dust cover
Main specifications: W490 x H176 x D411 mm 11.0 kg
※Shipping service. No. 58 Special Feature = 3rd <THE STATE OF THE ART SUPREME COMPONENT> AWARD SELECTION/ NEW JBL4345 Detailed Report/ EMT927VS Torrence Reference/Listen to Tannoy SRM Series/Infinity “IRS” Anatomy/1981.4.15 issue. Published models: JBL/4345BWX MCINTOSH/MC2500 VICTOR/TT-801, CL-P10, TS-1 MICRO/SX-8000, HS-80 ONKYO/INTEGRA P-309, INTEGRA M-509 MARK LEVINSON/ML-6AL AUDI-TECHNICA/AT-34E11 ENTRE/EC-30 SME/3012-R SPECIAL TECHNICS/EPC-C100CMK3 FIDELTY RESEARCH/XF-1 SELLESION/DITTON300 KEF/MODEL105.4 KENWOOD/L-08C, L-08M PIONEER/A-980 SANSUI/AU-D907F SONY/TA-AX8 LO-D/TU-1000 LUXMAN/PD300 ADC/ASTRION LINN/ASAK/ S56.4.15 issued. Since the photograph is a sample, the actual item may be broken or have markings etc.
※Shipping service. No. 13 Special Feature = Special Stereo Component Collection Using Switching Tests/Opening Discussion: Yasuoka Shotaro, Gomi Kosuke/Fun with Paper Component Plans/Published Models: VICTOR/MCA-105, MCT-105, MCP-105, MCM-105, CF-105, ICM-105 Hitachi/SR-300, SR-600, IA-1200,, HS-600 DPK-405 PM-70 TRQ-757D TA-1120F TA-3120F, TA-3060, TA-1166, ST-5300, TA-1000, STR-200, TC-6360, TC9800 ONKYO/INTEGRA712, PREVIOUS, PIONEER/STM-31, PHILLPIONEER/CS-500, CS-700, INTEGRA713 INTEGRA714 INTEGRA701 INTEGRA613 INTEGRA401 STT-31 CP-31 RP-31 TX-70, SF-70 MITSUBISHI/DA-30T, DA-30R TRIO/KL-5060 AKAI/M-10, X-330D /S45.1.20 issued. Since the photograph is a sample, the actual item may be broken or have markings etc. Since the photograph is a sample, the actual item may be broken or have markings etc.
Mini plug cable 1.5m stereo mini plug to stereo mini plug Stable high sound quality can be ensured with a high purity 99.996% OFC oxygen-free copper cable. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: original box
Victor DT-20 compatible CS-1021 and HMD-1008 compatible replacement needles Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
VICTOR DT-51 and ST-51 compatible needles Unused, unopened Operation has not been confirmed. No warranty, sold as is (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
Replacement needle for Victor MD-1050Z, Z5P Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Victor DT-25H equivalent. Replacement needle for EG-82476 and MD-1011Z. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-25H equivalent. Replacement needle for EG-82476 and MD-1011Z. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-25H equivalent. Replacement needle for EG-82476 and MD-1011Z. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-29 equivalent. Replacement needle for CS-1013Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-41 equivalent. Replacement needle for MD-1041Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box