The disposal price has been reduced. Member discounts are not applicable. 2025/5/29 sales price 348,000 yen Maintained! A rare Torrens dynamic long arm. It is made based on the 997 adopted in the EMT 927. The connectors are EMT type and are compatible with TSD-15 and Torrens MCH-1. A 7PIN DIN is attached to the output part, and a phono cable is attached (Murakoshi Yoichi)
Maintenance information: 2025.5.28 maintained (T subweight, OF/subweight missing added, genuine bias slot added, genuine bias weight added, original arm base product added, output cable added)
Accessories: instruction manual (copy), armrest (external product), mounting screws, inside force canceller, phono cable
Main specifications: Dynamic balance type EMT connector, effective length 297 mm, overhang 18 mm, needle pressure range 0 to 5 g
Maintained! A record player with an SME long-arm 3012R mounted on a TD-127. This time it doesn't have an auto lift-up mechanism. It is a model incorporating Torrens' idea of “conveying music played by humans, not sounds played by machines.” When combined with a good cartridge, it's a player that can play anything from classical to rock regardless of genre (Daiki Goto)
Maintenance information: 2025.6.5 maintenance (replacement of deteriorated parts (electrolytic capacitors, semi-fixed volumes, transistors, etc.) on the board (control board, motor drive board), resoldering the board. VOL, front panel pitch adjustment volume disassembly/contact polishing. Disassemble and clean the tone arm. Indicator lamp replacement. Grease up the platter bearing. Since the motor does not rotate, the motor shaft is completely disassembled and the motor shaft is polished and lubricated. Disassemble and clean the clutch part and replace the felt. Made of MDF material because the bottom plate is missing. create. Floating adjustment. Check turntable rotation speed and check arm needle pressure. Check the sound output. Chassis cleaning. Comprehensive operation confirmation inspection.)
Accessories: none
Main specifications: [TD-127] belt drive floating suspension 33,45,78rpm 30cm zinc alloy turntable double 16-pole synchronous motor speed fine adjustment range ± 6% W555 x H200 x D460 mm 20.4 kg [3012R] heavy needle pressure compatible compatible cartridge 9.5 to 34 g needle pressure adjustment 0 to 5 g
The price has been drastically reduced. 2025/5/24 sales price 378,000 yen 2023 maintenance completed! The final Torrens model equipped with ESOS (auto lifter function). The glamor and luster of the medium to high range unique to the SME 3012R arm is added to the stretchability unique to floating suspensions, and it makes you hear beautiful sounds. The exterior is dull and has small scratches, but it is generally good for its age (Sasaki Shota)
Maintenance information: 2023.11.22 Maintained (INPUT pin jack replacement, VOL cleaning. In-board gain settings for both other channels. Replace capacitors and DC cut capacitors. (Power stage, driver stage transistor check OK)
Accessories: copy of manual, subweight, power adapter
Main Specifications: [TD-520] Belt Drive System 16 Pole Synchronous Motor Electronic Speed Selection 33 1/3, 45, 78 rpm Turntable/30cm Zinc Alloy 3.1 kg W550 x H180 x D410 mm Weight 15 kg [3012R] Static Balance Universal Type Effective Length 307.3 mm Compatible Cartridge 9.5 to 34 g Needle Pressure Adjustment 0 to 5g
The price has been reduced. 2025/5/9 sales price 79,800 yen Maintained! 60Hz specification. It is an armless model (arm base for EMT929). It is an attractive, powerful model with smooth movement similar to floating. There are cracks and stains on the dust cover on the exterior (Ryo Mizusaki)
Maintenance information: 2025.4.29 Maintained (replaced due to belt slip. Due to damage to the dust cover hinge, the bearing was created and installed. The electrolytic capacitor has been replaced. The strobe mirror has been cleaned. The board height adjustment mechanism grease has been improved. There is damage to the right rear adjustment screw. The motor and spindle have been lubricated. The pitch volume center has been adjusted. (The switch indicator lamp is out and replaced due to poor contact)
Accessories: none
Main specifications: belt drive floating system W485 × H168 × D390 mm 14.2 kg
※Shipping service. Special Feature = All of the Latest Bookshelf Speakers (top) /Thinking about Audio Criticism (Sugano Okihiko) /Audio Life (Gomi Kensuke)/Published Models: PIONEER/SC-3000, SM-3000 LAX/L308 TEAC/TN-400 MICRO/MR-422, MR-622 PIONEER/CS330, CS-550 ELECTRO VOICE/SENTRY3 BOZAK/B-410 CLASSIC DUAL/DUAL701 MACINTOSH/MAC1900 JORDAN WATTS/JODRELL, JUPITER TLS GOLDRING/G820 SUPER E STANTON/60EE PICKERING/UV-15 2400Q LAX/L504, L-507 NIKKO/R-5000 JIMTEC/M-100, V-3 NAPOLEX/SS-3, ES- 100 KLIPSCH/CORNWALL GOODMANS/DIMENSION8 FISHER/ST-500, ST-530, ST-550 AIWA/AP-2050 TECHNICS/AP-2050, SL-120 ROTEL/RP-1000 GARRARD/ZERO100 THORENS/TD125MK2B MICRO/VF-6000, M-8000 TECHNICS/RS- 745U, RS-728U AIWA/AD-5500 INPERIAL/MK-1 Since the photograph is a sample, the actual product may be broken or there may be markings etc.
Arm base for TD-124 The previous owner had a GRACE short arm G-454 installed (the hole is cracked). There is paint peeling on the back side (Murakoshi Yoichi)
Accessories: none
Main specifications: arm hole diameter 35 x 25 mm W73 mm x H13 mm x D324 mm