Maintained in August 2025. A super tweeter with JBL's separate network specifications. It is a model that uses pure beryllium suitable for ultra-high frequency reproduction as the diaphragm to achieve pure sound and breadth with reduced distortion. The playback frequency band is compatible up to 55 kHz, and it is also suitable for playback of next-generation music sources such as SACD. There are threads and dullness on the exterior. (TAMURA Eiji)
Maintenance information: 2025.8.24 maintenance completed (repair with switch knob adhesive hip tube, battery case replacement, battery installation)
Accessories: spike base, cable
Main specifications: 25mm diameter compression driver system super tweeter allowable input 50W playback frequency band crossover ~ 55kHz 4Ω main unit W107 × H67 × D129 mm 0.97 kg network W107 × H55 × D195 mm 1.0 kg
* Since the meter is defective on one side, it is inexpensive (there is a meter difference between the left and right, and the starting position is not at 0). Maintenance was completed in 2025/12. The final model of Ampzilla. A representative American sound with strong, tight low frequencies! The dry, clean-sounding character is the perfect match for vintage speakers of yesteryear. This is a masterpiece machine that briskly drives famous speakers from JBL and Altec. The exterior is dull and dirty. The fuse holder has been replaced with a black one. Serial 104730 (Tamura Eiji)
Maintenance Information: 2025.12.3 Maintained (fuse holder replaced. Meter switch disassembly contact cleaning. (*The internal movement of the meter was poor, and the meter was disassembled, but repairs were not possible)
2022.5.12 Maintained (fuse holder lock claw adjustment. Replace the fuse. 0 point meter adjustment Offset voltage, idling current adjustment. (Other internal inspection voice check)
Accessories: No accessories
Main specifications: 200W+200W (8Ω) perfect balance configuration W445 × H178 × D229 mm 22.7 kg
※It is cheap because the veneer is in poor condition, such as being rolled up. This is a Krypton vibration absorption board. It has a hybrid structure filled with zircon sand and iron ball sand. How about under the foot of a record player or large power amplifier? Sound separation is good and transparency is high. The exterior is rolled up and floated, and there are tape marks on the bottom. (TAMURA Eiji)
Accessories: none
Main specifications: W600 x D600 x H55 mm Weight 20 kg
※It is cheap because the veneer is in poor condition, such as being rolled up. This is a Krypton vibration absorption board. It has a hybrid structure filled with zircon sand and iron ball sand. How about under the foot of a record player or large power amplifier? Sound separation is good and transparency is high. The exterior is rolled up and floated, and there are tape marks on the bottom. (TAMURA Eiji)
Accessories: none
Main specifications: W600 x D600 x H55 mm Weight 20 kg
The perfect wooden stand for small speakers. You can easily use it when you want to gain height with small to medium speakers. Small scratches and floating decorative plates can be seen on the exterior. There are dullness and scratches on the exterior (Tamura Eiji)
Accessories: none
Main specifications: H455mm top plate 220 x 220 mm bottom plate 290 x 290 mm 3.6 kg
USB cable 1.5m USB-C to B type high purity OFC cable with cotton structure There is a big difference in sound resolution and sound image localization between USB cables for data. Recommended for the first step to an audio USB cable (Tamura Eiji)
Maintenance information: 2026.5.13 operation confirmed
Accessories: case
It is an RCA cable that is easy to handle with a 0.5 m pair, has a straightforward tone, and a sturdy structure. The exterior is dull (Tamura Eiji)
Maintenance information: 2026.5.13 continuity confirmed
Accessories: none
It is an RCA cable that is easy to handle with a 0.5 m pair, has a straightforward tone, and a sturdy structure. The exterior is dull (Tamura Eiji)
Maintenance information: 2026.5.13 continuity confirmed
Accessories: none
It is an RCA cable that is easy to handle with a 0.5 m pair, has a straightforward tone, and a sturdy structure. The exterior is dull (Tamura Eiji)
Maintenance information: 2026.5.13 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2026/4/30 sales price 398,000 yen LINN high-end speakers have arrived. While this speaker is delicate and has a high amount of information, it is a high quality speaker with a high level of texture that is easy to listen to, so you won't get tired of listening. It is an excellent product that can also be finely adjusted with wiring and spikes. There are small scratches and dullness on the exterior. Serial 1171917/1171918 (Tamura Eiji)
Maintenance information: 2026.4.30 sweep check OK
Accessories: saran net, spikes, instruction manual
Main specifications: 5-way floor type playback frequency 49 Hz to 33 kHz (passive) 40 Hz to 33 kHz (active) input impedance 8 ohms efficiency 87 dB W210 x H1,000 x D380 mm mass 32 kg/book
The price has been reduced! 2026/4/9 sales price 5,000 yen This is a pan lock used when storing an amplifier in a wood case. Please note that I don't know which models can be used. The exterior is dull and scratched. (TAMURA Eiji)
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2025/11/26 sales price 8,000 yen This is a STAX condenser type (CP-X) arm pipe. There aren't many single items in stock, so don't miss it (Tamura Eiji)
Maintenance information: 2025.11.26 continuity confirmed
Accessories: No accessories
The disposal price has been reduced! Member prices are not applicable. 2025/11/27 Sales price 3,000 yen ※1 bottle only. Clarion's 15 cm full range unit. The details are unknown, but the sound is less peculiar. (TAMURA Eiji)
Maintenance information: 2025.11.27 sweep check OK
Accessories: No accessories
Key Specifications: 15cm full range unit 8Ω
The price has been reduced! 2026/3/25 sales price 8,000 yen This is a platter for DP-1300M. How about replacements or those with eccentricities? There are threads etc. on the exterior. (TAMURA Eiji)
Accessories: none
Main specifications: diameter 330 mm, weight 1.5 kg
The disposal price has been reduced! Member prices are not applicable. 2026/5/2 sales price 128,000 yen with remote control and SD card! Master recorder AD/DA converter for business use. This device was originally developed for master recording in studios. In addition to PCM192 kHz recording, it also supports DSD 2.8/5.6 MHz recording and playback. It can also be used as an AD/DA converter. It is also compatible with file name editing etc. using only the main unit or connecting to a USB keyboard. It also has plenty of input/output terminals, and is also multi-functional as an AD/DA converter. This is an excellent device that allows you to record and edit high-resolution sound sources with just one unit. *Depending on the standard, SD cards may not be played, but these are specifications. As for the exterior, there is a slight unevenness in the display. (TAMURA Eiji)
Maintenance information: 2026.5.2 operation confirmed
Accessories: remote control, SD card, power cord
Main specifications: Compatible media/SDHC card (4GB to 32GB) /CF card (1GB to 64GB) Type I/*Only files can be copied with CF/SD to USB memory (2GB to 64GB), recording and playback format/44.1/48/88.2/96/176.4/192 kHz (16 bits/24 bits), analog input/output/RCA/balanced XLR digital input/output/S/PDIF/CASCADE, input Frequency/SRC off 44.1/48/88.2/96/176.4/192 kHz, SRC on 32 to 216 kHz W483 × H45 × D305 mm 4.2 kg
The price has been reduced! 2026/5/1 sales price 40,000 yen RCA cable 1.0 m pair TMD line cable. The model number is unknown, but it is an item where you can feel the vividness of the goodness of TMD. Externally, there is a tear in the coating. (TAMURA Eiji)
Maintenance information: 2026.5.1 continuity confirmed
Accessories: No accessories
The price has been reduced! 2026/5/4 sales price 69,800 yen ※6 month warranty. finished product. A single operation power amplifier using a 6L6GC output tube with powerful and natural sound quality. The output tube is compatible with being replaced with a similar tube, and is automatically set to the optimal bias for the output tube being inserted. Also, the operation mode of the output tube can be easily switched, so you can fully enjoy the fun of a vacuum tube amplifier with this one unit. There are no noticeable scratches on the exterior. (TAMURA Eiji)
Maintenance information: 2026.5.4 operation confirmed
Accessories: specifications, power cable
Main specifications: used vacuum tubes 6L6GC x 2, 12AU7 (ECC82) x 2 dimensions W252 x H170 x D285 mm (when vacuum tubes are attached, including protrusions), weight 6.6 kg
The disposal price has been reduced! Member prices are not applicable. 2026/4/1 sales price 79,800 yen Maintained! 150-4H instrument model It is based on the masterpiece unit 150-4C, and the thick sinking low frequencies and instantaneous power that can be imagined even from thick rims cannot be enjoyed without this woofer. This product is recommended for those looking for an aggressive mid-low range that makes you want to make a loud noise by storing it in a front load enclosure, etc. There are tear repair marks around some edges. (TAMURA Eiji)
Maintenance information: 2026.4.1 Maintained (grommet solder and tinsel replaced. (Repairing torn corn paper)
Accessories: No accessories
Main specifications: 38 cm ferrite playback frequency band 35 Hz to 2.5 kHz 98 dB impedance 8 ohms rim outer diameter 400 x D157 mm screw pitch 370 mm (diagonal) 13.85 kg
The disposal price has been reduced! (Member price not applicable) 2026/4/19 sales price 118,000 yen This is a fully balanced D/A converter headphone amplifier compatible with MQA full decoding. Equipped with Asahi Kasei AK4497. You can enjoy sufficient quality as a headphone amplifier. Please enjoy the detailed, three-dimensional sound with lots of spells. There are no noticeable scratches on the exterior. Serial X7-DAC 287 (Tamura Eiji)
Maintenance information: 2026.4.18 Operation confirmed
Accessories: instruction manual, connection cable
Main specifications: USB Audio: MAX PCM32bit/384kHz, DSD Native 256, DOP128 USB-A, USB-B, miniUSB Digital Input: OPT/MAX PCM 32bit/192kHz COAX/MAX PCM 32bit/192kHz AES/EBU: MAX PCM 32bit/192 kHz JAVS Link3 (I2S-HDMI Cable) · MAX PCM 32 bit/192 kHz, DSD Native 256, DOP256 W260 x H67 x D215 mm weight 2.6 kg
*For commercial use, it is sold as is. Standard model of 120V commercial power amplifier. It's high watt and can be played with plenty of room even with large speakers. Even though it's for commercial use, there is little coloring and the feeling that the sound flies straight through is very appealing. On the exterior, there are dents in the transformer and capacitor. Serial AE673105 (Tamura Eiji)
Maintenance information: 2026.5.9 operation confirmed (operation confirmed at 100V)
Accessories: none
Main specifications: 120V specification 155W+155W (8Ω) SNR 110dB W457 x D254 x H209 mm 18.1 kg
A network switch that helps improve sound quality with network audio. It helps improve the quality of network signals. It has a total of 8 high-quality Gigabit Ethernet ports, and can be connected to all audio devices' network ports at once. The exterior is dull and has small scratches. Serial N2324000371 (Tamura Eiji)
Maintenance information: 2025.9.7 operation confirmed
Accessories: AC adapter, instruction manual (English), LAN cable, original box
Main specifications: W155 x H26 x D85 mm weight 1.2 kg
Compatible with 5.0 m category 8 transmission speed (40 Gbps) LAN cable. A new technology “Tite-Shield,” which achieves a cable thickness of 2.5 mm despite applying triple shields to 23 AWG (approx. 0.57 mm) conductors, has been adopted. The model is soft and easy to use. (TAMURA Eiji)
Maintenance information: 2026.5.9 operation confirmed
Accessories: none
DENON player cabinet This is a standard model where the standard phono motor DP-3000 is often mounted. Resonance in the cabinet itself is suppressed by stacking rowan wood to a thickness of 70 mm. There are sunburn marks and stains on the exterior (Tamura Eiji)
Accessories: none
Main specifications: W530 x H170 x D420 mm weight 6.7 kg
Shure's classic needle pressure gauge. Needle pressure can be adjusted in 0.05g increments. Since there are 2 measurement positions, tracking forces can be measured up to 3 grams. (TAMURA Eiji)
Maintenance information: 2026.5.9 operation confirmed
Accessories: original box instruction manual
Main specifications: measurement range 0 to 3.0 g dimensions W140 x H15 x D25 mm weight approx. 20 g
Shure's classic needle pressure gauge. Needle pressure can be adjusted in 0.05g increments. Since there are 2 measurement positions, tracking forces can be measured up to 3 grams. (TAMURA Eiji)
Maintenance information: 2026.5.9 operation confirmed
Accessories: original box
Main specifications: measurement range 0 to 3.0 g dimensions W140 x H15 x D25 mm weight approx. 20 g
Lin's network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. Externally, there are insulator marks on the top plate. Serial 1247668 (Tamura Eiji)
Maintenance information: 2026.5.8 operation confirmed (software 4.116.588)
Accessories: remote control, power cable
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
1.8 m PSE standard power cable with non-twist construction Luxman standard power cable. This cable is thick, soft, and has a reputation for its high texture. It is an orthodox sound quality that can be used for a wide range of purposes without any habit. There is dirt on the sheath (Tamura Eiji)
Maintenance information: 2026.5.7 continuity confirmed
Accessories: none
This is a PC-3MC replacement needle used in Pioneer PL-570 players, etc. (TAMURA Eiji)
Maintenance information: 2026.5.6 Operation has not been confirmed since there is no PC-3MC. The stylus cantilever is fine.
Accessories: case
Main specifications: MC type frequency characteristics 10 Hz to 32 kHz load resistance 30 kΩ to 100 kΩ suitable needle pressure 2 g ± 0.3 g
This is a PC-3MC replacement needle used in Pioneer PL-570 players, etc. (TAMURA Eiji)
Maintenance information: 2026.5.6 Operation has not been confirmed since there is no PC-3MC. The stylus cantilever is fine.
Accessories: case
Main specifications: MC type frequency characteristics 10 Hz to 32 kHz load resistance 30 kΩ to 100 kΩ suitable needle pressure 2 g ± 0.3 g
The disposal price has been reduced! Member prices are not applicable. 2026/4/15 Denon's current CD player will be in stock for the first time at Hi-Fi Hall at a sales price of 298,000 yen! Denon-like designs are alive and well. It's an impressive player with an impressive amount of information and clear sound, supported by a sturdy body. It demonstrates good cost performance that is comparable to advanced models. There are no noticeable scratches on the exterior. Serial DCQY122400021 (Tamura Eiji)
Maintenance information: 2026.4.15 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: Playback frequency range 2 Hz to 100 kHz W434 x H138 x D405 mm weight 16.8 kg