It was overhauled in 2024/9, including the creation of a new dust cover and the replacement of 16 deteriorated parts. This is a TD-520SUPER+3012R system with gunmetal turntable specifications. The sound quality is delicate, soft, and warm due to the stability of the gunmetal turntable and the smoothness of the belt drive system. A suspended floating suspension has been introduced, and the regeneration system and rotation system are completely independent from motor vibrations. The exterior is dull, and there are some bumps and small scratches. Serial 12797 (Yamato Yuki)
Maintenance information: 2024.10.26 Maintained (electrolytic capacitors, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment and board re-soldering. Front panel pitch adjustment VOL fixation correction and internal cleaning. Arm disassembly/cleaning, arm shaft bearing replacement. Disassemble and clean the clutch part, and replace the felt. RCA connector replacement. Grease up the platter bearing. Lubricate the motor shaft and adjust the floating. Check the turntable rotation speed and check the arm needle pressure. Check the sound output. Chassis cleaning. Comprehensive operation confirmation inspection dust cover newly created)
Accessories: English instruction manual copy shell (SME S-2) transport lock pin x 2
Main specifications: TD-520-SUPER/ drive system belt drive motor 16 pole synchronous motor speed 33 1/3, 45, 78 rpm, electronic speed selection dimensions W550 x H180 x D410 mm weight 15 kg (main body only) SME: 3012 r/type static balance universal type effective length 307.3 mm compatible cartridge weight 9.5 g to 34 g
Maintained! With the density and suppleness of the sound typical of THORENS, you can enjoy an analog feel not found in recent players. The arm is equipped with the SME3009R, and it is a car that can be enjoyed in a wide range of ways, from light needle pressure to heavyweight cartridges such as SPUs. There are small scratches, cracks, etc. on the dust cover (Oikawa Tetsuji)
Maintenance information: 2026.5.11 Maintained (belt replacement, internal inspection, spindle lubrication, arm operation, sound check) 2021.11.19 Maintained (replacement for belt extension, servo circuit capacitor replacement, lead screw cleaning because it is heavy, replacement due to poor rubber in the subweight, arm operation/voice check, arm end lift detection cam crack repair due to cam misalignment, fixed, rotation speed adjustment)
Main specifications: [TD-320MK3] belt drive type floating cabinet size W440 x H170 x D350 mm [3009R] static balance type short type 9 inch needle pressure 0 to 5 g compatible cartridge weight 9.5 to 22 g
A popular SME classic headshell with a stylish design. It is an essential item for light needle pressure arms and heavy cartridges.
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The price has been reduced! 2026/5/3 sales price 13,000 yen*There is a slight smell of tobacco. Comes with original box! A convenient tweeter when you want to add a little more high frequency from the full range. Since it's cone-shaped, it's not too tight, and it's easy to use with a soft high range. (FUJISAWA KOSHI)
Maintenance information: 2026.5.3 operation confirmed
Accessories: instruction manual, original box
Main specifications: 5 cm cone tweeter unit 8 ohms 92 dB 2500 Hz to 20,000 Hz 0.15 kg
The price has been drastically reduced. 2026/5/3 sales price 128,000 yen Maintenance completed! Torrens 100th anniversary “Centennial” model. It is armless and has a base hole that seems to be suitable for SMEs. Torrens is a player from the Golden Age. There are only models equipped with a direct power supply, so it's a model that can't be underestimated because it drives a record board with strong torque. The arm base is glued and does not separate from the platter. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.4.30 maintenance completed (dust cover hinge mechanism, loosening and retightening, acrylic stay adhesive fixing, 50/60 switching shutter, cushion replacement, mirror cleaning, 33 rotation display lamp replacement, electrolytic capacitor replacement, power switch rattling correction, power cord outlet change motor, TT shaft lubrication parts cleaning, rotation operation check)
Accessories: turntable seat
Main specifications: belt drive 33/45/78 rotation compatible arm part: static balance type effective length 237 mm cartridge mounting weight range 9.5 to 34 g (including shell) needle pressure variable range 0 to 5 g W505 x H170 x D395 mm 14 kg
A popular SME classic headshell with a stylish design. It is an essential item for light needle pressure arms and heavy cartridges (Daiki Goto)
Maintenance information: 2026.5.6 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The disposal price has been reduced. Member discounts are not applicable. 2026/2/22 sales price 15,000 yen. Unknown arm base very similar to the THORENS TD-521 Super base. Clear, not smoke colored. There is dullness (Murakoshi Yoichi)
Accessories: none
Main specifications: 154 x 30 x 170 mm
Maintenance such as disassembling all switches and cleaning contacts was completed in 2025/5. Comes with a cabinet. Macintosh's classic preamp. It reproduces clear mid-range and glossy tones. This model should be used by music fans who enjoy all kinds of sources. The full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. The exterior has dents and small scratches on the wood cab. Serial EB6827 (Yonejima Satoshi)
Maintenance information: 2025.5.27 Maintained (each SW/VR disassembly contact has been repolished, 5 lamp fixing grommets, 5 lamps replaced. Front panel and knob cleaning. Each operation was confirmed, waveform confirmed, and sound output tested.) Maintained on 2012.4.26 (87 capacitors have been replaced*Nippon Chemi-Con KMG, KME, and SME are used for both capacitors. Replace 1 IC due to unstable operation. VR and SW cleaning rework. Pin jack cleaning. (Internal and external cleaning)
Accessories: copy of instruction manual
Main specifications: 100V specification equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Self-made cabinet for DP-6000. The hole in the tone arm (about 40 mm x 25 mm at the longest part) looks like it's for SME, but when I tried it with the 3009S2imp, it was too small to fit in. Please note that it is not for SMEs (Oikawa Tetsuji)
Accessories: none
Main specifications: W540 x H122 x D446 mm weight 9.9 kg (actual measurement)
The price has been drastically reduced. 2026/1/23 sales price 8,000 yen. Unspecified cabinet. A hole similar to THORENS TD124 and a base to attach an SME are set, but details are unknown. It seems that bottom arm holes etc. still need to be processed. If you've been looking for one, take this opportunity. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: W600 x H123 x D432 mm 7 kg (actual measurement)
The disposal price has been reduced! (Member prices are not applicable) 2023/9/28 sales price 5,000 yen Wood cabinet for TD-124 from unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: No accessories
Main specifications: W597 ✕ H160 ✕ D445 mm Weight 3.9 kg
※Shipping service. No. 58 Special Feature = 3rd <THE STATE OF THE ART SUPREME COMPONENT> AWARD SELECTION/ NEW JBL4345 Detailed Report/ EMT927VS Torrence Reference/Listen to Tannoy SRM Series/Infinity “IRS” Anatomy/1981.4.15 issue. Published models: JBL/4345BWX MCINTOSH/MC2500 VICTOR/TT-801, CL-P10, TS-1 MICRO/SX-8000, HS-80 ONKYO/INTEGRA P-309, INTEGRA M-509 MARK LEVINSON/ML-6AL AUDI-TECHNICA/AT-34E11 ENTRE/EC-30 SME/3012-R SPECIAL TECHNICS/EPC-C100CMK3 FIDELTY RESEARCH/XF-1 SELLESION/DITTON300 KEF/MODEL105.4 KENWOOD/L-08C, L-08M PIONEER/A-980 SANSUI/AU-D907F SONY/TA-AX8 LO-D/TU-1000 LUXMAN/PD300 ADC/ASTRION LINN/ASAK/ S56.4.15 issued. Since the photograph is a sample, the actual item may be broken or have markings etc.