RCA cable uses a 3.0 m pair of 1-core shielded wire/core OFC copper wire and shielded OFC copper wire side-wound shield. The sound quality is flat and well-balanced (Kojima Yosuke)
Accessories: none
The disposal price has been reduced (not applicable to all members). 2025/7/19 sales price 178,000 yen This is a new model that has taken up a large space in conventional analog amplifiers, and the power amplifier circuit and heatsink have been miniaturized and reborn to be slim. The resolution and transparency of audio signals have been greatly improved, and in addition to being equipped with a PHONO1 system compatible with MM/MC, it is also equipped with a POWER AMP IN that bypasses the pre. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2025.7.19 Operation confirmed
Accessories: power cable, remote control, manual
Main specifications: 200+200W (4Ω) 100W+100W (8Ω) damping factor 500 (8Ω, 20Hz-20kHz) W440 × H123 × D453 mm 15.3 kg
The price has been drastically reduced. 2025/7/20 sales price 450,000 yen*Although this is a multi-amp dedicated speaker, a 405S2 (AM8/16) amplifier is not included, so please use a separate channel divider and power amplifier. The crossover is 1800 Hz. Maintenance has been completed, such as tweeter disconnection repairs, cable creation, saran net repair, etc. The main monitor speaker of the British BBC, manufactured to order. The bold, shaded tone not found in the current model is attractive. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2025.7.20 maintained (tweeter single-side disconnection repair, exterior repair/polishing/clear finish, front baffle repair/painting, handle parts cleaning, velcro replacement, unit detachment, input terminal rust removal/contact cleaning, new cable creation, net cleaning/repasting, lining fabric replacement, frame repair)
Accessories: cable
Main specifications: 2 way 2 speakers, multi-amp system, bass reflex, floor type, 116 dB, crossover, 1.8 kHz, W460 x H760 x D400 mm, 32.0 kg
The price has been drastically reduced. 2025/7/21 sales price 298,000 yen Maintained. An open deck developed incorporating various ideas in addition to the reliability and durability cultivated with professional equipment for broadcast stations and studios. Its excellent performance and stability have a reputation for its high reliability that can also be used as a master recorder, and the powerful sound unique to tape is attractive. The exterior is dull over time and has small scratches (Oikawa Tetsuji)
Maintenance information: 2025.7.21 maintained (recording reamplifier deterioration parts replacement, recording re-calibration, belt replacement, contact restoration processing at various locations, board solder correction, mechanical system grease up, cleaning, control system adjustment)
Accessories: none
Main specifications: Track method: 2 tracks, 2 channels (recording, playback) Monitor: 4 tracks, 2 channels (playback), tape speed switchable: 38, 19 cm/s maximum use reel 10 W450 x H550 x D255 28.5 kg
The price has been drastically reduced. 2025/7/22 sales price 298,000 yen Maintenance was completed in 2025.3. The look is reminiscent of the company's flagship UTOPIA at the time, and similarly, unique polykevlar cones have been adopted for the woofer and mid, and the identity has been inherited. You can enjoy clear and well-organized European sounds. Overall there is dullness (Oikawa Tetsuji)
Maintenance information: 2025.3.17 maintained (exterior cleaning/touch repair tweeter maintenance: edge replacement, lead wire repair unit detachable)
Accessories: jumper
Main specifications: 3 way 3 speakers, 4 ohms, 92 dB, W340 x H1100 x D412 mm, 51 kg
The price has been reduced. 2025/7/23 sales price 128,000 yen Tone arm maintenance has been completed. This is a combination of a powerful machine equipped with the Technics SP-20, which has a reputation for stability in the heavy cabinet LWD-IC on the red console, and the AC-3000, a masterpiece arm with Audiocraft's one-point support/static balance/oil dump system. It has a calm appearance and plays analog sound with plenty of atmosphere. It also comes with a self-made dust cover ※Lightweight main weights, subweights, lateral weights, etc. are out of stock (Oikawa Tetsuji)
Maintenance information: 2025.7.23 maintained (all shell 4-pin input terminals, arm detachable connector terminals, arm base output connector terminals, and RCA cable output terminals are cleaned; additional silicone grease oil is injected into the arm lifter, adjusted so that the arm lifter slowly rises and falls; overall cleaning of arms, shell terminals, RCA cables, etc.)
Accessories: dust cover
Main specifications: SP-20: direct drive 33/45 rotation AC-3000: static balance type total length 333 mm effective length 237 mm overhang 15 mm needle pressure range 0 to 3 g (0.25 g steps) compatible cartridge dead weight 3 to 17 g W542 x H222 x D422 mm (actual measurement)
Phono equalizer using a non-feedback CR type amplifier circuit using all-stage vacuum tubes. Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. Equipped with a needle-type analog meter with adjustable sensitivity to monitor output levels, it expresses a mechanical presence and functional beauty. This is one that can be controlled in a variety of ways and allows you to thoroughly enjoy analog playback. The exterior is also in good condition with no conspicuous scratches (Oikawa Tetsuji)
Maintenance information: 2025.7.24 Operation confirmed
Accessories: original box, instruction manual, power cable
Main specifications: Circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
The price has been reduced! 2025/7/13 sales price 45,000 yen A woofer that uses an HR diaphragm that achieves both weight reduction and high rigidity. It is characterized by sound quality with a sense of speed while ensuring sufficient low frequency playback capability. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2025.7.4 sound output confirmed
Accessories: instruction manual, original box
Main specifications: 16cm woofer, 8 ohms, minimum resonance frequency, 45 Hz, playback frequency band, F0 to 10 kHz, output sound pressure level, 88 dB, magnet weight: 1,090 g, total weight: 3.64 kg, recommended crossover frequency: 2 kHz or less, baffle hole size: φ151 mm, recommended enclosure type, bass reflex type
Comes with original box. The core model of Eclipse developed based on the concept of “accurate playback.” The expansive sound field and outstanding phase characteristics that don't seem like a 10cm full range are attractive. It is a popular model filled with all of the company's development ideas. It is good without any major noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2025.7.24 Operation confirmed
Accessories: instruction manual, original box, spikes
Main specifications: 10cm cone type full range speaker playback frequency 42Hz to 22kHz 84dB 6Ω W384 x H978 x D393 mm 19.5 kg (1, stand included)
Maintenance was carried out with attention to detail, such as replacing capacitors and replacing SP terminals! A kit model of a power amplifier using a 50CA10 3-pole output tube and an OY15 type output transformer, composed of circuits and parts conforming to the MQ60 type, which has been evaluated by LUXMAN. The sound of a vacuum tube has a sense of volume that seems to meet expectations, and it gently envelops you. Sounds that don't require scale are particularly unique, and the slight thickness that spreads from below the mid-range makes you feel comfortable and relaxed (Sasaki Shota)
Maintenance information: 2025.7.25 Maintained (vacuum tube socket, block capacitor, electrolytic capacitor, oil capacitor, SP and RCA terminals, semi-fixed VR, fuse, spark killer, diode, micro SW replacement. Load tests, input/output waveform checks, and sound output tests are OK. Vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuses, spark killers, diodes, micro SW replacement. Load test, input/output waveform confirmation, load test (1 kHz sine wave, at 8 ohm load: 25W+25W, actual measurement), sound output test OK.)
Accessories: none
Main specifications: 30W+30W 50CA10 push pull W410 x H160 x D205 mm 13.8 kg
Pair tube direct heat triode magnesia coating square getter code: 126/152, measured value 78/76 (rejection value 50), the tube head with a replacement box is burnt, and it is inexpensive because there are few getters ※Pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box (made by WE, damaged a lot)
Pair tube direct heat triode ring getter code: 6813/6826 measured value 46/44 (rejected value 34) with original box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
A classic disc stabilizer. Moderate weight gives a sense of stability to record playback (Sasaki Shota)
Accessories: none
Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
Unknown stone board. 2 sheets per pair. Be sure to use the small speaker stand (Sasaki Shota)
Accessories: none
Main specifications: W300 x H12 x D300 mm 2.9 kg
Maintained by the manufacturer! Nakamichi's 2-head cassette deck bias can be adjusted, and the sound quality is exceptional when properly adjusted! The sound is clear and in focus. You can see that the thickness of the sound has increased even when recording from a CD. There are dullness and stains due to aging (Sasaki Shota)
Maintenance information: 2025.7.24 manufacturer maintained (lamp replacement, lamp holder replacement. Shut off lamp replacement Transistor replacement. Diode replacement. Idler exchange. Cam belt, capstan belt, counter belt replacement IC exchange. Rerecording head polishing. roller, guide cleaning. REC switch-over SW cleaning (Each SW cleaning)
Accessories: copy of the manual
Main specifications: 2 heads output level line: 1 V/1 kΩ headphones: 45 mW input sensitivity 50 mV/50 kΩ bias frequency 105 kHz W500 x H130 x D350 mm 8.3 kg
*Currently sold. Fostex 30cm full range unit. It is characterized by high efficiency and high durability, just like for professionals. There is dirt and rust on the whole (Sasaki Shota)
Maintenance information: 2025.7.25 sweep test good
Accessories: none
Main specifications: 30cm full range 8Ω 98dB 5.1 kg
2 unspecified stone boards per pair have a mirror finish other than the bottom. How about a small speaker base (Sasaki Shota)
Accessories: none
Main specifications: W300×H13×D300mm 3.0 kg
Pair tube direct heat triode tube made in China white base metal foot measurement value 64/56 (rejected value 38) with white box*Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube direct heat triode tube made in China white base metal foot measurement value 64/64 (rejected value 38) with white box*Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
The flagship series of speaker cable 2.5m pair banana plug terminal QED speaker cable. The sound creation that values the company's typical music is attractive. QED technology has been consolidated, such as the adoption of an AIRLOC connector that achieves a perfect contact point by vacuum crimping. The reproducibility and vivid sound of music, which is the company's appeal (Kojima Yosuke)
Accessories: original box
The disposal price has been reduced! Member prices are not applicable. 2018/10/17 sales price 100,000 yen This is an impressive vintage rack with a western plate. It is about 2 meters tall and can mount 19-inch devices. There are scratches and stains on the exterior. Also, there are some cracks and inclinations in the mount part. (Miura Kimiya)
Accessories: No accessories
Main specifications: 19 inch rack hole pitch 465 mm W535 x H2090 x D660 mm
The price has been drastically reduced. 2025/7/18 sales price 598,000 yen Front lamp replacement, maintenance included, meter cleaning included! A power amplifier that embodies Macintone. It combines the power to make a 38cm woofer sound lightly with impressive driving power and a sense of scale with depth. It is a powerful machine that is one of the most popular Macintosh generations. *There is a slight difference between left and right meters, but this is due to individual differences in meters. There is no problem with operation (Daiki Goto)
Maintenance information: 2025.7.18 Maintained (cement resistors, capacitors, and panel lamps have been replaced. SW disassembly cleaning, panel disassembly, meter defogging cleaning. The meter has been adjusted. The power supply, WATT/HOLD SW disassembly cleaning, exterior cleaning, internal glass fog cleaning by removing meter acrylic, all front panel lamps, all capacitors (excluding block capacitors), cement resistance replacement, and meter adjustment (Watts/dB adjustment) were carried out. Load test (1 kHz sine wave, at 8 ohm load: 500W+500W, OK) *There is a slight difference between left and right meter operation, but it is an individual difference between the meters themselves → not compatible)
Accessories: copy of manual, power cable
Main specifications: rated output 500W+500W MONO 1,000W output frequency band 20Hz to 20kHz SNR 115dB (at rated output) W445 x H255 x D491 mm weight 49.9 kg
Balance cable is a modern version of the 8412 using 1.0 m pair of all-Teflon insulators. It is a cable that is more instantaneous than its price (Shota Sasaki)
Maintenance information: 2025.7.24 Operation confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2025/7/16 sales price 198,000 yen unit, exterior repair and maintenance completed! Sony's masterpiece. A car that plays everything from classical music to jazz in a fresh, natural sound field. It is a model that is large, powerful enough, and has high cost performance. While the low frequencies are tight, there is a firm sense of volume. A 30mm thick, hardwood particle board with a double structure is used as the enclosure baffle board (Kobayashi Hitoshi)
Maintenance information: 2025.7.15 maintenance completed (unit maintenance: woofer/mid-cone paper coating, woofer single side repair, unit detachable, exterior cleaning/touch repair)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system floor type 30 Hz to 20,000 Hz 8 ohm cross 550 Hz, 4,500 Hz W510 x H940 x D445 mm 48 kg
The price has been drastically reduced. 2025/7/21 sales price 138,000 yen A phono amplifier equipped with an A/D converter that can convert an input analog signal into PCM of up to 24 bit/192 kHz or DSD signals of 2.8 MHz and 5.6 MHz and output it. In addition to MM, low output MC cartridges (0.3 mv) can also be used. You can enjoy analog in a slightly different way, such as the input impedance and input capacity being set. The exterior has a crack near the front of the top plate (Mizusaki Ryo)
Maintenance information: 2025.7.21 operation confirmed
Accessories: remote control, power cable, original box
Main specifications: Output terminals: XLR terminals, RCA terminals (both stereo) COAX, USB input terminals: phono input terminal, line input terminal size W210 x H61 x D360 mm weight 6.4 kg
Comes with original box Former flagship preamp C-3850. Equipped with a “Balanced AAVA” volume that has further evolved to the extreme. The ultimate preamp that combines an unprecedented high SN and sense of energy as an analog pre. The quality is still attractive enough (Sasaki Shota)
Maintenance information: 2025.7.24 Operation confirmed
Accessories: original box, remote control, manual, power cable, cloth
Main specifications: Balanced AAVA volume equipped with LINE input 6 systems, balanced input 6 systems, LINE output 2 systems, balanced output 2 systems, W477 x H156 x D412 mm 25 kg
Maintained! HAVANT HANTS reprint (Audionics official imported product). A famous historical unit that is now fully established as a vintage. The unique free edge structure has no edges, and 3 pieces of corn paper are suspended with bakelite cantilevers, and their good response is remarkable (Oikawa Tetsuji)
Maintenance information: 2025.7.22 Maintained (remove the upper and lower dampers on one side, remove the cone, remove rust from inside the porcelain circuit slit, and perform rust prevention, and assembly adjustments)
Accessories: original box, protective cloth
Main specifications: Cone type full range unit, 25 cm aperture input, 12 W impedance, 15 ohms, minimum resonance frequency, 20 Hz, playback frequency band, 20 to 20,000 Hz, pore magnetic flux density, 17,000 gauss, voice coil, aperture 2.5 cm
A cool pre-main amp with a glossy black curved design. The meticulousness of construction shines through. It has orthodox yet glossy sound quality with flat band characteristics. You can enjoy sound with a fast response and a sense of speed. There are many small wounds overall (Oikawa Tetsuji)
Maintenance information: 2025.7.24 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: rated output 55W+55W speaker output terminals 4Ω to 16Ω (SP1 system) 6 audio input terminals W420 x H113 x D369 mm weight 11.5 kg
Kriskit's line-only control amplifier. Simple circuit configuration without phono input. Although it is a domestic product, it has a crisp, well-extruded American sound, very similar to Dinakit. The exterior is generally dirty and dull (Mizusaki Ryo)
Maintenance information: 2025.7.16 Operation confirmed
Accessories: none
Main specifications: 4 line inputs, 1 phono system, W380 x H110 x D235 mm, 3.3 kg
*Currently sold. 192 kHz 24 bit Hi-Res compatible network player Equipped with Pioneer's unique bit expansion technology Hi-bit 32 Audio Processing. It is compatible with a wide range of network functions, including dLAN and AirPlay. Other than that, it can also be used as a USB-DAC. The exterior has small scratches and dullness (Oikawa Tetsuji)
Maintenance information: 2025.7.24 Operation confirmed
Accessories: remote control, power cable
Main specifications: FLAC, WAV, AIFF, MP3, ALAC 192 kHz 24 bit compatible frequency characteristics 4 Hz to 80 kHz digital audio input optical digital input, coaxial digital input, iPod, iPhone, iPad (digital direct) compatible network terminal LAN (100base-TX, 10Base-T) W435 x H99 x D330 mm 7.3 kg