Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Other
- Amplifiers
- Integrated amplifiers
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Speakers
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Analog equipment
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- Phonograph
- Digital equipment
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Network players
- Tapes
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Accessories
- Cables
- Insulators
- Racks
- Headphone
- Parts
- Parts
- Tubes
- Manual
- Audio set
- Audio set
- Other audios
- Other audio
- Records
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other LPs
- Other soft
- Tapes
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- LD/DVD
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Books
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- A new dust cover has been created. Maintained in 2015/5. A compact micro direct drive player. The arm is equipped with the company's MA-505, and it is one with excellent cost performance where you can fully feel the good sound quality. The connection cable is detachable, so it can be replaced with a cable of your choice*The sticker on the 33/45 rotation changeover switch is missing (Oikawa Tetsuji) Maintenance information: 2026.3.25 Create a new dust cover 2015.5.15 Maintained (33/45 switching SW, speed adjustment VOL, poor contact cleaning, other board capacitor deterioration, 33/45 adjustment POT, poor contact replacement, Tr etc. check, operation check) Accessories: connection cable, copy of instruction manual Main specifications: Direct drive type, tone arm/dynamic balance type, effective length 237 mm, W497 x H154 x D385 mm, weight 11.5 kg
- description
- Full maintenance completed! A total of 80 deteriorated parts, such as 18 capacitors, 12 sockets, and 4 resistors, were replaced, and details were completely refreshed, such as refining SW/VOL disassembly contacts. Furthermore, the speaker terminals have also been replaced with those compatible with banana plugs, making it easier to use. Compared to the A series and MQ series, it has an overwhelmingly rich luster and just the right amount of delicacy. The driving power that pushes forward firmly and the glossy sound quality is attractive. The exterior is in a state where there is a feeling of use over time, such as dullness and slight small scratches. Serial 011103/011166 (Yamato Yuki) Maintenance information: 2026.3.26 Maintained (SW/VOL disassembly contacts repolished and oxidized/vulcanized grease applied. Input/output waveform confirmation, load test (1 kHz sine wave, 8 ohm load: 60 W+60 W, OK), sound output test) (Replace 12 vacuum tube sockets, 18 capacitors, 4 resistors, 2 RCA terminals, 2 semi-fixed VR, 4 spark killers, 8 SP terminals, 16 diodes, 4 micro SWs, 4 adjustment VR, 2 fuses, 2 power cords, and 4 knobs. The board was re-soldered and the input gain VR disassembled and cleaned. Load test (at 1 kHz, 8 ohm load: 60 W for both) Check input/output waveforms and perform sound output checks Accessories: 2 power cables, copy of the instruction manual (general purpose) Main specifications: Vacuum tubes used KT 88:2, 624G: 2, 12AU 7:1, 2AX 7:1, output 60 W, W370 x H170 x D 240 mm, 16 kg
- description
- Maintained in September 2015! A model representing 70s MICRO direct drives. The armless arm mount, which has a 3-point support structure and is compatible with a variety of arm exchanges, is easy to use, and expandability that allows you to customize it in your own way is also attractive. Not only is the sound satisfying to listen to, but the stoic design, which seems to have cut down on all waste, also tickle your heart. Overall, there is oxidation, corrosion, and dullness. Serial 7032796 (Tomoho Asaine) Maintenance information: 2015.9.5 maintained (in-board capacitor replacement, strobe.33.45 adjustment, POT replacement, control unit 33/45 adjustment, VOL cleaning operation check) Accessories: none Main specifications: Direct drive aluminum alloy 31 cm turntable (2 kg) W444 x H125 x D444 mm weight 10 kg (phono motor only)
- description
- A phono equalizer for MC that condenses the best of Swiss Precision Industries into an ultra-compact housing. The simple and thorough signal path design achieves extremely low noise and high resolution, and pulls out fine signals without leaving any trace. With a high gain of 62 dB, it is compatible with low output MCs with plenty of room, and the sound tone with excellent transparency and sense of speed is attractive. It is a compact yet authentic car that strongly reflects the philosophy of the designer Lukashek. The exterior is good with no noticeable scratches (Ryuichiro Kaneko) Maintenance Information: 2026.3.23 Accessories: AC adapter original box Main specifications: MC phono preamp RIAA deviation: ±0.5 dB filter: 10 Hz (-1 dB, 20 Hz) gain: MC 62 dB input impedance: 22 kΩ
- description
- ※The needle cover is missing, and it is closer to the cantilever. DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Oikawa Tetsuji) Maintenance information: 2026.3.24 Operation confirmed Accessories: none Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
- description
- DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Oikawa Tetsuji) Maintenance information: 2026.3.23 Operation confirmed Accessories: needle cover, instruction manual, case Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
- description
- Comes with original box! It is an arm base that can be used with micro 1500/5000/8000 series. The exterior is dull and has small scratches (Ryuichiro Kaneko) Accessories: original instruction manual box Main specifications: Compatible arms: audio-technica AT1501/2, AT1501/3 MICRO MAX-282 fidelity research FR-66S AUDIO CRAFT AC-4000MC Victor UA-7045, UA-7082 SAEC WE-506/30 aperture diameter 41mm weight 1468g
Manufacture:Onlife Research
Price: JPY 13,636 Sold Out
- description
- Exclusive arm base for Dynavector DV-505 Can be used with MICRO, etc. The exterior is dull (Kaneko Ryuichiro) Accessories: original box Main specifications: arm mounting part diameter 30 mm dimensions W145 x H19 x D59 mm weight 1.06 g
- description
- Good stylus and cantilever! A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that it has a high output and can be used without a step-up transformer. Serial 19118 (Fujisawa Yukishi) Maintenance information: 2026.3.23 Operation confirmed Accessories: instruction manual, original box, characteristic table ※ needle cover missing Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
- description
- VOL, balance VOL, and other SW decomposition, polishing, cleaning, etc. have been maintained! Each SW has been disassembled and cleaned and maintained! Sony vintage amplifier. It was the flagship model at the time, and I was first surprised by the feeling of extrusion that I could tell the moment it made a sound. The thickness of the mid-range is perfectly combined with the well-contoured sound, and you can feel more power than the specs. There are spots and scratches on the exterior. Serial 21322 (Yonejima Satoshi) Maintenance information: 2026.2.4 maintained (volume, balance VR disassembly and cleaning, etc. MODESW, FUNCTIONSW BASS, TREBLESW, SPEAKER rotation SW, MONITORSW, TONESW, LOWFILTER, HIGHFILTER, FUNCTION lever SW disassembly, polishing and cleaning, other power supply micro SW, bias adjustment semi-fixed VR x 4, flat AMP Capacitor 3,3uf x 4 deterioration replacement, other RCA input/output jack cleaning, speaker terminal cleaning, front panel, knob cleaning, bias adjustment, sound output running test) Accessories: No accessories Main specifications: 80W+80W W400×H149×D327mm 13kg
- description
- I was able to make a simple sound, but the details have not been checked and will be sold as is. 3-way digital channel divider The frequency, slope, and level of the low cut filter and high cut filter can be set respectively, and the slope can be freely selected from 6 types. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi) Maintenance information: 2026.3.15 operation confirmed (simple sound output only, details not checked) Accessories: power cable Main specifications: number of audio input channels 2 terminals type XLR, electronic balance microphone input channel number 1 XLR balance number of audio output channels 6 terminals shape XLR balance AD-DA conversion 24 bit, 48 kHz frequency characteristics 20 to 20 kHz W483 x H45 x D150 mm 2.3 kg
Manufacture:NEEWER
Price: JPY 1,818
- description
- No microphone holder This is a standard boom-type microphone stand that uses a tripod base with excellent stability. Height adjustable Detailed settings can be made according to the usage environment and application. There is dullness and a feeling of use throughout (Murakoshi Yoichi) Accessories: none Main specifications: straight part height approx. 780 to 1470 mm, boom part approx. 760 mm
- description
- Technica's current top cartridge model that uses a solid micro linear needle! It is a cartridge that can obtain excellent high frequency reproduction and clear sound image localization (Murakoshi Yoichi) Maintenance information: 2026.3.15 sound output confirmed Accessories: none Main specifications: VM type playback frequency range 20 to 27,000 Hz output voltage 4.0 mV needle pressure 1.8 to 2.2 g (2.0 g standard) load resistance 47 kΩ solid micro linear needle mass 8.0 g
- description
- ※The needle cover is out of stock. DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. This cartridge can be recommended to a variety of people, from analog beginners to experts. There is dirt and dullness on the body (Oikawa Tetsuji) Maintenance information: 2026.3.16 Operation confirmed Accessories: none Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
- description
- DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. This cartridge can be recommended to a variety of people, from analog beginners to experts. On the exterior, the cantilever is slightly to the right. Serial 3012 (Matsumoto Tsuyoshi) Maintenance information: 2026.3.15 sound output confirmed Accessories: original instruction manual box*needle cover not included Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
- description
- ※Inexpensive because the cantilever turns right. DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. This cartridge can be recommended to a variety of people, from analog beginners to experts. Serial 9612 (Murakoshi Yoichi) Maintenance information: 2026.3.10 sound output confirmed Accessories: needle cover Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
- description
- Each SW has been disassembled, polished, cleaned, and maintained by replacing deteriorated parts! Equipped with a VU meter, this preamp was developed by combining many of Sony's technologies. Clear tones without blurred outlines have been made more vivid. It surprisingly matches Japanese speakers, and plays female vocals with a glossy tone. On the exterior, there is a feeling of wear such as scuffs, rust etc. on the top of the hood. Serial 20489 (Tomoho Asaine) Maintenance information: 2026.2.20 maintained (volume replaced with VR replacement, balance, VR disassembly, cleaning, etc., FUNCTION MODE BASS, TREBLE, EACH ROTATION MULTIPLE SW DISASSEMBLY POLISH CLEANING GREASE UP OTHER MONITOR SW HIFILTER LOWFILTER FUNCTION LEVER, OTHER METER LAMP EXCHANGE, OTHER MINI VR 6 PLACE ULTRASONIC CLEANING OTHER POWER SUPPLY MICRO SW EXCHANGE, etc. Power cord replacement and other front panel knobs rear panel input/output terminal cleaning Sound output running test) Accessories: none Main Specifications: Input Phono1/2, Tape Head, Tuner, Tape, Aux Dimensions W400 x H149 x D315 mm Weight 9 kg
- description
- A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range and resolution have been improved, making it compatible with modern sources with plenty of room. Serial 9401 (Matsumoto Tsuyoshi) Maintenance information: 2026.2.23 sound output confirmed Accessories: needle cover Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
- description
- ※The rotation is slightly fast, but this is the current situation. Currently sold. USB is unchecked. Denon's fully automatic record player compatible with USB memory. Since it is equipped with a phono equalizer that can be switched ON/OFF, it can also be used by those using amplifiers without PHONO input. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2026.3.5 operation confirmed (rotation is slightly fast, but this is a specification) Accessories: none Main specifications: belt drive, 33.1/3, 45 rpm turntable: die-cast aluminum tone arm: dynamic balance type, effective length: 195 mm cartridge type, suitable needle pressure 3.5 g, digital recording medium USB (mass storage class), digital recording format and bit rate: MP3, 192 kbps Trans Music Manager compatible OS: Microsoft Windows 7 /Vista/XP/2000 (32 bit version) size W360 x H98 x D358 mm weight approx. 3.2 kg
- description
- All major parts such as SW and VOL have been removed, completely disassembled and polished, exterior polishing/painting, and all major parts such as coupling capacitors have been replaced and fully maintained! A tubular control amplifier representative of Lux. The softness and fullness of the mid-range is exceptional. As you play, the sound becomes more familiar, so this is an amplifier I want you to stay with for a long time. Serial 2021223 (Yonejima Satoshi) Maintenance information: 2026.3.4 maintained (coupling capacitor, electrolytic capacitor, micro SW, spark killer, headphone jack, microphone jack, DIN terminal, vacuum tube socket, main VR replacement. All SW/VOL disassembly contacts have been re-polished, and grease has been applied to prevent oxidation and sulfidation. (Input/output waveform check, sound output test) Accessories: power cord, copy of instruction manual Main specifications: vacuum tube 12AX7 x 6/12 AU7 x 1 using a tubular control amplifier Input: 2 phono system line system 3 system tape system 2 system output: 2 systems W476 x H190 x D275 mm 12 kg
- description
- 67 electrolytic capacitors, 37 transistors have been replaced, switches have been disassembled and cleaned thoroughly, etc. Each board has been re-soldered so you can use it comfortably. The well-extruded sound with a core is full of appeal that cannot be obtained with modern audio. The exterior has dents, stains, and small scratches on the back of the top plate (Mizusaki Ryo) Maintenance information: 2026.3.5 maintained (67 electrolytic capacitors, 37 transistors, 4 semi-fixed resistors, 5 rear double volumes, 2 spark killers, 2 microphone terminals, DIN terminals, power supply micro switches, fuses, 2 power cushions (ept sealer), and 2 meter lamps have been replaced. The 12 rotary switches (power, meter level, BASS, TREBLE, OVER BASS, OVER TREBLE, mode, filter, function 1, function 2, monitor), output level switches, main VR, balance VR, headphone VR, and impedance select switches were disassembled and cleaned, and grease was applied to the contacts. For the 20 DIN terminals and RCA terminals, the caulking fixings were replaced with M3 x 10 screws, nuts, and spring washers. The headphone jack and AUX3 jack terminals have been cleaned. Each board was re-soldered and flux cleaned. The caulk on the RCA terminal was removed and 23 parts of the RCA terminal were cleaned. The power supply was adjusted to a high voltage of 150V and a low voltage of 37V. (The input/output waveforms were checked and the left-right balance was checked, and a comprehensive operation test was carried out by connecting a power amplifier) Accessories: instruction manual Main specifications: Type stereo preamp input Phono (MM/MC compatible) /tuner/AUX/tape equipped with phono input switching/load switching function frequency characteristics Phono RIAA deviation within ± 0.5 dB high level 10 Hz to 100 kHz S/N ratio high level 90 dB or more phono 70 dB or more harmonic distortion ratio 0.03% or less tone control Bass/Treble filter Low/High equipped with 2 outputs RCA/headphone terminal equipped power supply AC 100V power consumption 23W external dimensions W400 x H149 x D315 mm weight 9 kg
- description
- No lead wires. Die-cast aluminum shell The design is also stylish and original. Since its own weight and rigidity are ensured, it can be expected to tighten the overall sound and extend the low frequencies. You can see a feeling of use, such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2026.3.1 continuity confirmed Accessories: none Main specifications: Die-cast aluminum, self-weight 10.6 g
Manufacture:AIWA
Price: JPY 1,364
- description
- AIWA microphone stand. It is an easy-to-use and convenient stand with a variable height angle (Ryo Mizusaki) Accessories: original box Main specifications: adjustable height approx. 90 to 120 cm, weight 4.5 kg (actual measurement)
- description
- Comes with original box! A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer. The body is dull, and there is discoloration on the cantilever (Sasaki Shota) Maintenance information: 2026.3.2 sound output operation confirmed Accessories: original box, needle cover Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
Manufacture:MICRO
Price: JPY 2,727
- description
- ※Screws are missing. MICRO die-cast aluminum shell. It also looks great with players manufactured by the company. There is dullness and a feeling of use. (FUJISAWA KOSHI) Maintenance information: 2026.3.2 continuity confirmed Accessories: No accessories ※Screws missing Main specifications: Die-cast aluminum, dead weight 10g
- description
- Maintained including volume, switch disassembly and cleaning, 59 deteriorated capacitors, lamps, relays, and resistor replacement! Yamaha's natural sound, which makes you feel refreshed, has been completely revived! The smooth sound that is familiar to the ears is unique to Yamaha in this era. It is possible to switch between Class A and Class B operation with a single switch. There is dullness over time (Daiki Goto) Maintenance information: 2026.2.24 Maintained (electrolytic capacitor, tantalum capacitor, semi-fixed resistor, switch, microphone terminal, lamp replacement. Each volume is cleaned, and switches are disassembled and cleaned. Cleaning panels, knobs, housings, and terminals. (Other parts will be readjusted and aging tested) Accessories: copy of the manual Main specifications: 15W+15W (8Ω/Class A operation) 70W+70W (8Ω/Class B operation) W436 x H144 x D323 mm 15.5 kg
- description
- Maintenance has been completed by Denon service, including 16 transistors, 2 capacitors, and pilot lamp replacement! A player that combines the cost-effective DP-3000 phono motor and the MICRO arm MA-505. It is a model that is still popular due to its stable operation. The rigidity of the self-made cabinet is solid, and the clear, thick sound of the core is impressive. Maintenance information: 2026.2.22 manufacturer maintained (16 transistors with rusted legs, replacement of 2 capacitors around the pilot lamp and head amplifier, operation test) Accessories: none Main specifications: 33/45 rotation compatible tone arm: MA-505 S-shaped arm needle pressure: compatible up to 3.0 g W520 x H180 x D520 mm
Manufacture:MICRO
Price: JPY 2,727
- description
- MICRO die-cast aluminum shell It also looks great with players manufactured by the company. The exterior is dull and has a feeling of use (Takahashi Nobuyuki) Maintenance information: 2026.2.21 continuity confirmed Accessories: none Main specifications: Die-cast aluminum, dead weight 10g (actual measurement)
Manufacture:MOGAMI
Price: JPY 2,273
- description
- XLR cable 1.0 m is a standard cable used as an XLR plug microphone cable made by Peer Neutrik. It is also characterized by its soft sound quality and ease of handling. The exterior has a feeling of use such as dullness (Tomoho Asaine) Maintenance information: 2026.2.16 continuity confirmed Accessories: none
Manufacture:MOGAMI
Price: JPY 2,273
- description
- XLR cable 1.0 m is a standard cable used as an XLR plug microphone cable made by Peer Neutrik. It is also characterized by its soft sound quality and ease of handling. The exterior has a feeling of use such as dullness (Tomoho Asaine) Maintenance information: 2026.2.16 continuity confirmed Accessories: none
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
