Comes with original box The ultimate version of the P-1. Pure A grade specification, which is rare for a headphone amplifier, so you can enjoy detailed and clear sound. The exterior is slightly dull, but there are no major noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2025.3.29 Operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 2W+2W (8Ω) 1W+1W (16Ω) high sound quality feedback circuit “ODNF3.0A”, 2 headphone outputs, 1 RCA/XLR input each, W440 x H82 x D408 mm 8.3 kg
Compact D/A converter compatible with USB input. It is also equipped with a full-scale preamp circuit that enables USB input, headphone amplifier, and analog input, and can also be used as a multifunctional control center. There is a scratch on the top plate on the front side (Kojima Yosuke)
Maintenance information: 2025.4.18 Operation confirmed (playback confirmed up to PCM192 kHz)
Accessories: power cable
Main specifications: Compatible sampling frequency 32 kHz to 192 kHz (up to 96 kHz when USB input) 16 to 24 bit 2 ch PCM compatible with Windows XP and later Mac OSX and later OS, headphone amplifier, built-in preamp circuit, W364 x H81 x D279 mm 5.1 kg
Interior and exterior refreshment maintenance completed! This is the first generation Arden equipped with an Alnico unit and HPD385. A model that demonstrates outstanding strengths in acoustic sources such as stringed instruments. It has a good sense of tone that plays music naturally, so you can relax and enjoy music. I recommend combining it with a Lux tube amp of the same age because the reverberation sound is expressed more beautifully (Kojima Yosuke)
Maintenance information: 2025.4.4 maintained (exterior maintenance: exterior repair, hakama repair/painting unit maintenance: low range side edge replacement/magnetic circuit gap cleaning/center adjustment, fastener polishing, high frequency side: magnetic circuit gap cleaning/center adjustment
Network maintenance: frequency characteristics check/ATT cleaning)
Accessories: saran net
Main specifications: 2 way 1 speaker front bass reflex 38cm coaxial unit 8Ω 92dB crossover frequency 1kHz W660 × H990 × D370 mm 43 kg/book
The price has been drastically reduced. 2025/4/18 sales price 228,000 yen DSD 5.6 MHz/PCM384 kHz compatible USB-DAC. The DAC chip is equipped with Barbrown PCM1792A with independent left and right channels, and is the company's full-featured D/A converter. There is only the top model, and it achieves a higher resolution level than the brother DA-200. There is a scratch on the top plate (Kojima Yosuke)
Maintenance information: 2025.4.18 operation confirmed (PCM384 kHz/DSD 5.64 MHz playback OK)
Accessories: power cable
Main specifications: Compatible sampling frequency: USB input (PCM) 32k/44.1k/48k/88.2k/96k/176.4k/192k/352.8k/384kHz (16/24/32bit) USB input (DSD) 2.82m/5.64MHz (1 bit) Coax/opt/AES/EBU input 32k/44.1k/48k/88.2k/96k/176.4k/192 kHz (16/20/24 bits) Digital input USB (type B) x 1 COAX/OPT 2 systems each AES/EBU (XLR) 1 system digital output COAX/OPT 1 system each analog output RCA/XLR 1 system W440 x H92 x D400 mm 11 kg
The disposal price has been reduced. Member discounts are not applicable. 2025/3/6 sales price 35,000 yen cut line cable 10.0m 6N conductor, unmanufactured cable with excellent resolution. The goodness of the material is well reflected in the sound. The exterior has a lot of dirt and dullness like tape marks on the sheath (Murakoshi Yoichi)
Maintenance information: 2025.3.1 continuity confirmed
Accessories: bobbins
It has been fully restored, such as replacing deteriorated parts and completely disassembling contact polishing such as SW/volume! Furthermore, the wooden case has also been repaired. The popular LUXMAN classic 38 series. The graininess and fineness of the sound have been brilliantly revived. The soft, warm, and thick sound is soothing from the core. The exterior has been beautifully finished due to case repairs (Tamura Eiji)
Maintenance information: 2025.4.2 Maintained (case repair. Replace parts that have deteriorated over time, completely disassemble SW/VOL, re-polish contacts, and apply grease to prevent oxidation and sulfidation. Circuit readjustment, input/output waveform confirmation, load test (1kHz sine wave, at 8Ω load: 24.5W+24.5W), sound output test.)
Accessories: copy of instruction manual
Main specifications: 30W+30W frequency characteristics 10Hz-50kHz vacuum tube/12AX7 x 3, 12AU7 x 3, 6267 x 2, 50C-A10 x 4, W476 x H190 x D335 mm 18 kg
Disposal price reduction. Member prices are not applicable. 2025/4/17 sales price 368,000 yen This is a mid-range model with greatly improved distortion characteristics and S/N performance mounted on the C-900U top-end model. It was developed with the concept of a high quality control amplifier dedicated exclusively to line levels in mind. There is dullness on the top plate, small line scratches, and extremely small scratches on the INPUT selector (Daiki Goto)
Maintenance information: 2025.4.17 operation confirmed
Accessories: remote control, manual, power cable, original box
Main specifications: 5 unbalanced input systems, 2 balanced systems, 2 unbalanced output systems, balanced 2 system dimensions W440 x H130 x D430 mm, weight 14.6 kg
Comes with original box This is the second CD-only player in the wooden box series. The output circuit is provided with 2 systems, a semiconductor and a vacuum tube, so you can switch and listen. The vacuum tube output uses a buffer circuit using the “ECC82” to achieve a smooth, musical analog-like sound with a full mid-range range. The exterior is good without any major noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2025.4.22 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: vacuum tube using 2 chCD ECC82 x 1 frequency characteristics · semiconductor 20 Hz to 20 kHz, vacuum tube 20 Hz to 20 kHz, vacuum tube 20 Hz to 20 kHz W440 x H167 ✕ D286 mm 10.8 kg
The disposal price has been reduced. Member prices are not applicable. 2025/4/15 sales price 498,000 yen Luxman high-grade SACD player. In addition to the powerful sound with a thick back, this is a versatile machine typical of a modern aircraft, with a high level of freshness and a good signal-to-noise ratio. Not to mention the high level of spatial expression unique to SACD, unlike Luckstone in the past, it is popular with jazz and rock fans for its high instantaneous sound quality. There are small scratches and dullness on the front panel (Oikawa Tetsuji)
Maintenance information: 2025.4.15 operation confirmed
Accessories: remote control, instruction manual, original box, power cord
Main specifications: analog output RCA x 1 XLR x 1 digital output (44.1 kHz CD/CD layer only) coaxial x 1 optical (TOS-LINK) x 1 digital input (32/44.1/48/88.2/96 kHz compatible) coaxial x 1 optical (TOS-LINK) x 2 W440 x H153 x D400 mm 23 kg
This is a compact power amplifier that allows you to enjoy the lax sound of recent years. Although it is entry class, the low frequency resolution and sharpness are qualities unique to modern models. It is a power amplifier with a high CP that shines. The one with volume is also convenient. There are thin line marks on the front and top plate (Kojima Yosuke)
Maintenance information: 2025.4.18 Operation confirmed
Accessories: power cable
Main specifications: output 25W+25W (8Ω) 70W (when 8Ω/BTL mono) 2 system input (LINE/BALANCE) W364 x H81 x D297 mm 7 kg
Maintenance has been completed, including cleaning each switch and replacing deteriorated vacuum tubes! The tubular preamp that graced the end of the Lux kit. It features a soft, warm sound, and lustrous classical and vocals. What is remarkable is the amplifier block, which has been finished to the highest quality. This is a first-class amplifier that Lux Kit is proud of (Daiki Goto)
Maintenance information: 2025.4.16 Maintained (· 100μF x 2 deterioration exchange for block capacitors · 2200μF deterioration replacement 4 pieces · correction treatment with glitches on each knob · simple external and internal cleaning procedures · main volume replacement, vacuum tube socket and RCA jack caulking repair
(*Operation has also been checked with AC 100V)
Accessories: none
Main Specifications: Tubular Control Amplifier Kit Output Voltage: Rated 2V Input Impedance: Phono mm/50kΩ CD, Line, Tuner/100kΩ W493 x H142 x D403 mm 11.5 kg
*Currently sold. Phono equalizer included with the Stereo Ontomo MOOK vacuum tube kit series. It is equipped with an equalizer curve (EQ curve) adjustment function. You can easily listen to LP records with vacuum tube sound. (FUJISAWA KOSHI)
Maintenance information: 2025.4.19 operation confirmed
Accessories: AC adapter, booklet
Main specifications: W183 x D130 x H88 mm 645 g
The price has been reduced. 2025/3/28 sales price 25,000 yen. Denon tempered glass inlaid 3-tier rack The height of the shelf can be changed in 4 levels. A 50mm thick high-density particle board is used on the outside, and a 30mm thick high-density particle board with tempered glass inlaid on the shelf board is used. The top plate is decorated with glass, so it has a sense of luxury. Hidden screws are missing. There is damage such as scuffs and chips (Murakoshi Yoichi)
Accessories: none
Main specifications: Loading limit weight: top plate/bottom plate 100 kg shelf board 50 kg W650 x H540 x D520 mm 50 kg
Power transformer primary: 100V secondary: 14.5V/DC1.1A, 285V/DC30mA W70 × H79 × D54mm 0.76 kg (actual measurement, not including protrusions) It is a power transformer used in the company's thin tube preamps, CL-32 and A3032 (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2025/2/20 selling price 89,800 yen The ultimate version of the P-1. Pure A grade specification, which is rare for a headphone amplifier, so you can enjoy detailed and clear sound. Serial M01200320B (Kanai Hidetsugu)
Maintenance information: 2025.2.17 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 2W+2W (8Ω) 1W+1W (16Ω) high sound quality feedback circuit “ODNF3.0A”, 2 headphone outputs, 1 RCA/XLR input each, W440 x H82 x D408 mm 8.3 kg
Maintenance has been completed, including cleaning each switch and replacing deteriorated vacuum tubes! The tubular preamp that graced the end of the Lux kit. It features a soft, warm sound, and lustrous classical and vocals. What is remarkable is the amplifier block, which has been finished to the highest quality. This is a first-class amplifier that Lux Kit is proud of. There is a small scratch (Daiki Goto)
Maintenance Information: 2025.4.16 Maintained (· Electrolytic Capacitor 2200 μF and Other Deterioration Replacements 3, Resistors 1/2 W Degradation Replacements · External and Internal Simple Cleaning Treatment · Phono Noise Reduction Measures → 2 Additional Shield Cases · Vacuum Tube Socket and RCA Jack Caulking Repairs ※ Other Operation Checked with AC100V)
Accessories: manual, original box
Main Specifications: Tubular Control Amplifier Kit Output Voltage: Rated 2V Input Impedance: Phono mm/50kΩ CD, Line, Tuner/100kΩ W493 x H142 x D403 mm 11.5 kg
Maintenance has been completed with careful attention to details such as electrolysis, coupling capacitors, main volume replacement, cabinet exterior repairs, etc. It is a relaxing sound that is soft and produces good mid-range sounds. As you play, the sound becomes more familiar, so it's an amplifier I want you to stay with for a long time (Kojima Yosuke)
Maintenance information: 2025.4.11 Maintained (coupling capacitor, electrolytic capacitor, micro SW, spark killer, headphone jack, microphone jack, DIN terminal, vacuum tube socket, main VOL replacement. All SW/VOL disassembly contacts have been re-polished, and grease has been applied to prevent oxidation and sulfidation. Input/output waveform check, sound output test wood cabinet repair)
Accessories: power cable
Main specifications: Vacuum tube used 12AX7 x 6/12 AU7 x 1 Input: phono 2 system, line system, 3 system tape system, 2 system output: 2 systems W476 x H190 x D275 mm 12 kg
This is an adapter for a NAGAOKA doughnut board. Essential for EP playback. It is machined from aluminum and has a sense of luxury. There is a small wound (Murakoshi Yoichi)
Accessories: none
Main specifications: machined aluminum, diameter 40 x height 9 mm, weight 20 g
1.8m power cable Luxman standard power cable with non-twist construction This cable is thick, soft, and has a reputation for its high texture. It is an orthodox sound quality that can be used for a wide range of purposes without any habit. There is dirt on the sheath (Tamura Eiji)
Maintenance information: 2025.4.4 continuity confirmed
Accessories: No accessories
Maintained! A high output power amplifier representative of the Lux Kit. As with the original, the output tube was replaced with a GE 6550A, and the sound that combines both tasteful luster and strength is attractive. There are scratches and seal marks on the hood (Kojima Yosuke)
Maintenance information: 2025.2.21 maintained (all 4 output tubes 6550A replaced, 6AQ8 replaced, 2 RCA jacks replaced, exterior and interior simple board part re-soldering treatment, vacuum tube socket caulking repair) *Other measured output 50W (8Ω) was measured with AC100V
Accessories: none
Main specifications: mulard type drive circuit adopted 50W+50W W465×H168×D206mm 17kg
Each part has been maintained, such as de-polishing, cleaning, etc.! Lux vintage premain amp. Although it has a thin body, it is a soft and smooth lux stone. Even in the low frequencies, it has more power than its size, and it makes you hear a sound that is firm in your lower back. There are scratches and bumps on the exterior. Serial K8504738 (Fujisawa Yukishi)
Maintenance information: 2025.3.20 maintained (STEREO switching SW, INPUT switching SW, TONE direct SW, TONE COMPENSATOR SW, subsonic SW, TAPESW1, TAPESW2, monitor SW, polishing and cleaning grease application, TONE VR x 2 cleaning, balance VR replacement, SW main unit replacement due to power push SW knob shaft deformation, speaker relay replacement, (Replace 4 power drive circuit transistors)
Accessories: No accessories
Main specifications: 55W+55W left and right independent power supply system using toroidal power transformer DC amplifier configuration W438 x H78 x D363 mm 10.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/10/13 sales price 20,000 yen Arm base that can be used with PD-171AL. The arm can mount an Ortofon AS-212D AS-212S. Heavy arm base made of 20 mm thick brass with a chrome-plated spin finish. If you're thinking about replacing an arm, don't miss it! There are no noticeable scratches on the exterior (Yamato Yuki)
Accessories: original box instruction manual wrench screw
Main specifications: brass, chrome plated, spin finish, diameter 105 x height 20 mm, weight: 1,105 g
The internal parts have been thoroughly reviewed and brushed up! The main part of the SQ38F is an independent power amplifier, the famous MQ60. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. Rust and paint peeling can be seen on the exterior. Serial 812212 (Fujisawa Yukishi)
Maintenance information: 2024.11.24 Maintained (vacuum tube socket, block capacitor, electrolytic capacitor, oil capacitor, SP and RCA terminals, semi-fixed VR, fuse, spark killer, diode, micro SW replacement. Load tests, input/output waveform checks, and sound output checks are carried out. Impedance switching SW/gain VOL disassembly contact refinement, oxidation and vulcanization prevention grease application, input/output waveform confirmation, load test (1 kHz sine wave, at 8 ohm load: 25W+25W, OK)
Accessories: No accessories
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
MC boost transformer pairs used in SQ38D etc. sold primary: 6Ω, secondary: 5kΩ with fixing brackets (Kojima Yosuke)
Accessories: fixing brackets
Main specifications: actual measurement by tester DCR No. 1-2:0.7/0.7 Ω, 2-3:0.7/0.7 Ω, 4-6:917/907 Ω
The price has been reduced. 2024/10/16 sales price 99,800 yen with casters Hayami's 5-tier horizontal audio rack with 3 additional tiers of the GT-9731. A style that sticks to standards and is faithful to the basics. It is a design that combines functionality with a sense of luxury. There is a feeling of use on the exterior due to many damage, stains, stains, etc. There is glitch due to damage to the dowels on the side plate and partition board, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: W1724 x H1300 x D580 mm approx. 169 kg
※Shipping service. Special Feature: Praise for Meiki Nakamichi DRAGON, the monumental cassette deck that astonished the world/Brand Story “Luxman”/etc. Issued on H26.12.18. Since the photograph is a sample, the actual product may be broken or there may be markings etc.
※Shipping service. Special Issue No. 192 = Modern High End Speakers with [Classical] [Popular] Their Diverse Musical Expression/Thorough Audition of New Fall Models (Esoteric = K01X/K03X, Luxman = D08U/D06U, Vivid Audio = G4 GIYA, Magnepan = Mg3.7i, TAD = TAD Compact Evolution One, Weiss = Medus, Boulder = 2110, octave = HP700, Einstein = The Poweramp, Mark Levinson = No. 585, Kronos Audio = Sparta+Helena, Tekdus = TDC01 Ti)/Excellent Recordings in the Digital Age 20 Unknown Must-Listen Editions/Isabelle Faustong Interview/ Published 2014.9.2. Since the photograph is a sample, the actual product may be broken or there may be markings etc.