The price has been drastically reduced! 2025/12/9 sales price 128,000 yen Maintained by Triode! This model is equipped with an MM phono equalizer and is compatible with a remote control for volume adjustment. In addition to dividing the transformer into 3 parts, changes have also been made, such as omitting the PRE-IN terminal, and the power supply LED is orange. In addition to the firm extrusion characteristic of vacuum tube amplifiers, it is a product with a delicate and clear tone. The exterior has scratches and dullness. Serial 12060535 (Fujisawa Yukishi)
Maintenance information: 2025.12.9 manufacturer maintained (selector polishing, volume replacement, remote control repair)
Accessories: remote control, instruction manual, power cord
Main specifications: KT88EH x 4, 12AX7 x 1, 12AU7A x 2 output 45W+45W W340 x H185 x D315 mm 15 kg
The disposal price has been reduced. Member prices are not applicable. 2024/12/16 sales price 128,000 yen Internal thorough disassembly, cleaning & replacement of deteriorated parts! UREI's 27-band graphic equalizer. It is only for commercial use, and is useful in clubs, halls, etc., and of course there are many bands, but there is little sound loss, and it works well in the band you really want, so you can create your favorite sound. The exterior is generally dull and has scratches (Oikawa Tetsuji)
Maintenance information: 2024.12.16 Maintained (serial NO4480 has 13 slider pot resistors replaced and slider pot resistor connection defects repaired. Also, the movement of the knob is heavy and astringent even when grease is applied. There are good ones, but please be aware that the knobs are long and structurally poor. (Gain changeover switch and slope switch replacement x 4, serial No. 3391 has good cleaning procedures, XLR wiring correction procedures, sound output tests after gain installation, and changes for each band due to insufficient gain volume)
Accessories: copy of the manual
Main specifications: 27 bands (20 Hz to 20 kHz) mono graphic EQ W482 x H90 x D205 mm 5.3 kg/unit
Speaker cable is a standard cable that has become synonymous with unprocessed speaker cables sold at 7.2m 1 end. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2025.12.12 continuity confirmed
Accessories: none
The price has been reduced! 2025/12/10 sales price 198,000 yen Maintained! Currently, 211 is mounted. The transmitter tube makes an aesthetically pleasing sound. It creates a smooth high range of quality and transparency, and allows you to listen to the beautiful sound unique to the company. There are small scratches on the exterior. (YONEJIMA Satoshi)
Maintenance information: 2025.12.10 Maintained (volume replacement, solder correction, vacuum tube pin cleaning, condenser position misalignment correction, ham balance adjustment. Bias check output audio check. (Check output approx. 8W) Turn on the right side of the power switch first, then turn on the left side after about 30 seconds.)
Accessories: instruction manual, power cord
Main specifications: rated output 8W+8W (8Ω) size approx. W374 x H240 x D303 mm weight approx. 22 kg
*Currently sold. Remote control is missing. It has a high signal-to-noise ratio and low THD value, and you can enjoy clear sound quality with little noise regardless of genre. In addition to paint peeling on the exterior and inside of the tray, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.9.16 Operation confirmed
Accessories: power cable
Main specifications: frequency characteristics 2 Hz to 20 kHz dynamic range 100 dB or more (EIAJ) S/N ratio 120 dB or more (EIAJ) headphone output level maximum 15 mw/32 Ω (variable) dimensions W430 x H114 x D290 mm weight 4.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2025/11/22 sales price 79,800 yen 606S2 anniversary edition. This is the 7th generation stand-mount speaker in the 600 series. Advanced continuity cones and improved crossovers have been combined to obtain deeper musical reproducibility. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.11.21 Operation confirmed
Accessories: saran net, bass reflex sponge, original box
Main specifications: 2 way 2 speaker output sound pressure level 88dB impedance 8Ω playback frequency band 40Hz to 33kHz W190 x H345 x D300 mm weight 6.9 kg
The price has been drastically reduced! 2025/12/7 sales price 298,000 yen A current belt drive type player equipped with Luxman's original tone arm. Dust coverless specification The high initial motion sensitivity unique to knife-edge bearings, stable trace performance, and excellent sound quality delivered from a machined aluminum heavyweight platter are attractive. Despite its compact size, you can enjoy authentic analog sound. The exterior is good with little feeling of use. Serial M20400019 (Yonejima Satoshi)
Maintenance information: 2025.12.7 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: belt drive system PID controlled brushless DC motor 33 1/3 rpm, 45 rpm, 78 rpm switchable static balance, S-shaped universal type knife edge structure compatible cartridge dead weight 4 to 10 g (17 to 23 g including attached headshell) anti-skating 0 to 4 g W465 x H133 x D393 mm weight 15.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2025/11/5 sales price 55,000 yen*Currently sold. A speaker system incorporating Faital Pro's 16cm full range unit 6Hx150-8 into a self-made enclosure. Bass reflex configuration. The details of the enclosure are unknown, but it is well-built. There is no network, and the capacitors are low cut. If you're looking for this size, take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.11.5 sound output confirmed
Accessories: none
Main specifications: faital PRO 6HX 150-8:15 cm full range 8Ω W320 × H530 × D295 mm 7.8 kg (actual measurement)
LAN cable for audio Double shielded construction to maximally avoid significant interference and data loss for applications. Since the copper cross-sectional area is large, there is little voltage drop due to high power (Asaine Tomo Method)
Accessories: none
This is the stroboscope that came with the DENON record player. 33 and 45 rotations of 50 Hz and 60 Hz can be measured, respectively. *To use a stroboscope, please prepare a small fluorescent lamp (a type that is not an inverter type) and a strobe emitter separately. You can see a feeling of use, such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: diameter 103 mm diameter 104 mm weight approx. 11 g (actual measurement)
This is the stroboscope that came with the DENON record player. 33 and 45 rotations of 50 Hz and 60 Hz can be measured, respectively. *To use a stroboscope, please prepare a small fluorescent lamp (a type that is not an inverter type) and a strobe emitter separately. You can see a feeling of use, such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: diameter 103 mm diameter 104 mm weight approx. 11 g (actual measurement)
This is the stroboscope that came with the DENON record player. 33 and 45 rotations of 50 Hz and 60 Hz can be measured, respectively. *To use a stroboscope, please prepare a small fluorescent lamp (a type that is not an inverter type) and a strobe emitter separately. You can see a feeling of use, such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Main specifications: diameter 103 mm diameter 104 mm weight approx. 11 g (actual measurement)
This is the stroboscope that came with the DENON record player. 33 and 45 rotations of 50 Hz and 60 Hz can be measured, respectively. *To use a stroboscope, please prepare a small fluorescent lamp (a type that is not an inverter type) and a strobe emitter separately. There are many appearance, feeling of use, dullness, and small scratches (Kobayashi Hitoshi)
Accessories: none
Main specifications: diameter 103 mm diameter 104 mm weight approx. 11 g (actual measurement)
This is the stroboscope that came with the DENON record player. 33 and 45 rotations of 50 Hz and 60 Hz can be measured, respectively. *To use a stroboscope, please prepare a small fluorescent lamp (a type that is not an inverter type) and a strobe emitter separately. You can see a feeling of use, such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: diameter 103 mm diameter 104 mm weight approx. 11 g (actual measurement)
This is the stroboscope that came with the DENON record player. 33 and 45 rotations of 50 Hz and 60 Hz can be measured, respectively. *To use a stroboscope, please prepare a small fluorescent lamp (type not an inverter type) and a strobe emitter separately (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 103 mm diameter 104 mm weight approx. 11 g (actual measurement)
Earth Cable If you are looking for an entry type earth cable for 3.0 m iPurifier AC, please take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Pair tube double triode tube, made in America, measured value 96/90 (rejected value 50) with white box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box (can be written on)
The pair tube direct heat triode is thought to be made in America due to its double square getter structure. The measured value is 62/54 (rejected value 38) with original box written on the base part on one side, and it makes a rustling noise inside the tube*The pair is determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube, ambient heat beam tube, British metal tea base, measured value 62/60 (rejected value 44) with original box (there is writing) burnt on the side getter, written on the base, and the printing is disappearing ※The pair is determined based on the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: original box (with writing)
Audio Craft 2024, the DIY Audio Ark “Now” and the Future (Iwade Demi), a DIY audio ark that makes full use of materials, the secret story of the Accuphase DF-75 development secret story (Ikigata Saburo) that constructs the ultimate audio, Craftsman Gathering 2024, and the Kiyoto Speaker Remake Guide (Kiyotomamor/ Editorial Department) are samples, so the actual product may be broken or written on.
※Shipping service. No. 58 Special Feature = 3rd <THE STATE OF THE ART SUPREME COMPONENT> AWARD SELECTION/ NEW JBL4345 Detailed Report/ EMT927VS Torrence Reference/Listen to Tannoy SRM Series/Infinity “IRS” Anatomy/1981.4.15 issue. Published models: JBL/4345BWX MCINTOSH/MC2500 VICTOR/TT-801, CL-P10, TS-1 MICRO/SX-8000, HS-80 ONKYO/INTEGRA P-309, INTEGRA M-509 MARK LEVINSON/ML-6AL AUDI-TECHNICA/AT-34E11 ENTRE/EC-30 SME/3012-R SPECIAL TECHNICS/EPC-C100CMK3 FIDELTY RESEARCH/XF-1 SELLESION/DITTON300 KEF/MODEL105.4 KENWOOD/L-08C, L-08M PIONEER/A-980 SANSUI/AU-D907F SONY/TA-AX8 LO-D/TU-1000 LUXMAN/PD300 ADC/ASTRION LINN/ASAK/ S56.4.15 issued. Since the photograph is a sample, the actual item may be broken or have markings etc.
※Shipping service. Special Feature = Modern Noise Considerations Vol.2/Summary of American 3-pole Output Tubes/MOS-FET Single Stage OTL Amplifier/Medium Monitor Speaker Research/New Feedback Circuit Type DC Preamp/38cmW Woofer System Vol.4/Published Circuit Diagram: PIONEER CT-580/S57.5.1 Published circuit diagram: PIONEER CT-580/S57.5.1 issue photos are samples, so the actual product may be broken or written on it.
※Shipping service. Special Issue No. 141 = decided! 1st Stereo Sound Grand Prix/ The Best Buy Component 821 Selection by Genre/Price Range/Exciting Report/dm68, P70 & D70, Sophia/The photos are samples, so the actual product may be broken or written on.
A slightly different travel guide visiting cities reflecting Germany's diverse past. Written by Sakai Eihachiro. The 4th edition was issued on 1988.1.10.
Maintenance information: B [The state is determined on a scale of 3 from A to C. (See below for details)] ~ Considering the condition, the price is about 1 discount from the regular used price.
※Shipping service. Written by Masaru Okahara, The Complete Book of Radio Techniques: Basics of Stereo Playback/S37.7.20, first edition, 1 print published.
Maintenance Information: C (burn, stain, tear) [Condition is determined on a scale of 3 from A to C. (See below for details)] ~ Considering the condition, the price is about 3 discount from the regular used price.
Accessories: vinyl cover (dirt, tear)
※Shipping service. This is a manual for CMOS digital circuits. It's written in great detail. /Written by Yojiro Yokoi/Published by Radio Engineering
Maintenance information: B [The state is determined on a scale of 3 from A to C. (See below for details)]
※Shipping service. We propose equipment knowledge and selection methods from a unique perspective. I think there are many parts that I can sympathize with and that are helpful. /Edited by: Nagasawa Kunishiro /Published by: Ohm
Maintenance information: C (broken, threaded, written) [The condition is determined on a scale of 3 from A to C. (See below for details)] ~ Considering the condition, the price is about 2 percent off the regular used price.
※Shipping service. You will learn about ICs thoroughly, starting with the basics. /Written by: Iwao Tachikawa/Published by Seibundo Shinkosha
Maintenance information: B [The state is determined on a scale of 3 from A to C. (See below for details)]
The disposal price has been reduced. Member prices are not applicable. 2024/11/25 sales price 50,000 yen An enclosure with unknown details imitating an ALTEC 828. There are scratches on the exterior, holes in the back plate, and adhesive peeling on the stay pedestal. (TERAMOTO Yoshihiko)
Accessories: stay fittings, screws
Main specifications: W765 x H1135 x D605 mm 43.4 kg (1 piece)/(measured) aperture diameter 335 mm screw pitch 385 mm
Refresh yourself by replacing the insulated push with a new one! The terminals have also been polished, so you can use it comfortably. A dividing network with a crossover frequency of 1200 Hz. If you cut it a little lower, I think the impression will change quite a bit once you try using it. How about going with making a system? The exterior is smudgy and has a feeling of use. (OYAMA Sachiko)
Maintenance Information: 2015.10.19 Maintained (terminal polishing, cleaning, insulation bushing & mounting screw replacement. ATT (SW) cleaning.
Check the input/output waveform and balance, and check the sound output. Frequency characteristic measurement check (~ 42 kHz)
Accessories: none
Main specifications: crossover frequency 1.2 kHz impedance low range: 8 to 12 ohms high range: 12 to 16 ohms 1.1 kg