The price has been reduced! 2025/10/17 sales price 25,000 yen This is a 5 inch active 2-way monitor speaker. The built-in DSP equipped with FIR filter technology independently developed by RCF optimizes frequency characteristics and dynamics, and reproduces a faithful sound source without colorization. There is a feeling of use on the exterior, such as dullness, line damage, and stickers on the sides. Serial NDHL00864/NDHV00861 (Tomoho Asaine)
Maintenance information: 2025.10.17 sound output confirmed
Accessories: Power cable (general purpose; types vary on left and right)
Main specifications: 2-way bass reflex type speaker with built-in amplifier, crossover frequency, 2100 Hz, frequency characteristics, 55 Hz to 20 kHz (-3 dB), amplifier total output 55 W, low range 35 W, high frequency 20 W, dimensions W186 x H274 x D266 (mm), weight 8.5 kg
Maintained! An A-shell oval needle characterized by the SPU's original direct sound. The tight, powerful mid and low frequencies and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. Serial 744943 (Tomonori Asaine)
Maintenance information: 2025.7.25 Maintained (damper adjustment, printed board contact failure)
Accessories: none
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms
The disposal price has been reduced. Member discounts are not applicable. 2025/10/6 sales price 1,480,000 yen Exterior cleaning, unit gap cleaning, etc. have been overhauled in 2022! Officially imported by TEAC Genuine TEAC autograph equipped with a TANNOY K3808 unit. The Shinkosha enclosure, which was manufactured with a license from the home country of England, was particularly appreciated for its good sound, and is characterized by a rich sound field reproduction that sounds loud like an autograph. The core K3808 coaxial 2-way unit is designed based on the famous monitor Gold and uses a gathered hard edge with good response. Coupled with the clear and sharp mid-high range, it creates a firm and majestic mid-low range (Murakoshi Yoichi)
Maintenance information: 2024.3.11 maintained (terminal replacement (used product of the same shape), and unit detachment/sweep test) 2022.3.29 maintenance (exterior repair/cleaning, top plate polishing/painting, saran net cleaning/reinstallation, unit maintenance (both low and high frequencies: cleaning within the magnetic circuit gap, center adjustment, center cap attachment), network maintenance (terminals, bridge plates, screws Remove, remove rust, acid wash, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check input/output waveform and balance, check sound output))
Accessories: none
Main specifications: 2-way, 1 speaker, all-horn system, corner type, 2-way unit (K3808), frequency characteristics, 50 Hz to 20,000 Hz, nominal impedance, 8 ohms, output sound pressure level, 96 dB, crossover frequency, 1,000 Hz, crossover frequency, 1,000 Hz, W1,070 x H1,525 x D670 mm, weight approx. 85 kg
Disposal price has been reduced (member prices are not applicable) 2025/10/5 sales price 178,000 yen Maintenance was completed in 2024/1! Ampzilla is a famous machine that brought fame to the world by the genius James Bongiorno. It features a tenacious and powerful sound. The match with Tedra of the same GAS is excellent. In addition to the exterior and SP terminals being replaced, there is a feeling of use such as cloudy paint threads, small scratches, and abrasions. Serial 110697 (Yonejima Satoshi)
Maintenance information: 2025.4.26 maintained (dismantled lamp replacement) 2024.1.16 maintained (transistor array short in Rch power bias circuit → replaced to adjust with Tr, check both other CH power stages OK, coupling C, bypass C, etc. → replacement, SP fuse holder adhesive fixing, internal and external cleaning, operation check)
Accessories: No accessories
Main specifications: 200W+200W (8Ω) W445 × H178 × D229 mm 22.7 kg
The disposal price has been reduced. Member prices are not applicable. 2025/6/26 sales price 238,000 yen Maintenance has been completed, such as capacitor replacement and switch disassembly and polishing! A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays particularly well with vintage speakers. There is a feeling of use on the exterior, such as scratches and dullness over time. Serial JBZ4959 (Yamato Yuki)
Maintenance information: 2025.6.26 maintained (each SW, VOL cleaning lamp replacement push button poor contact dismantling cleaning BASS, TREBLE direct soldering glass panel peeling correction pin jack cleaning auto onboard part capacitor replacement balance loudness replacement operation check balance knob adhesive)
Accessories: copy of instruction manual
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2025/6/5 sales price 59,800 yen. Manufacturer maintenance completed! This model incorporates a DA-305 tonearm into the DP-3000. It is a basic manual player that is simple and easy to operate. There is rust on the exterior and the metal part on the side of the hinge dust cover, and a feeling of use such as sunburn, dullness, and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2025.1.21 manufacturer maintained (15 TRs replaced, speed adjusted, operation confirmed)
Accessories: none
Main Specifications: Drive System: Direct Drive SN Ratio: 60dB Static Balance S Shape Tone Arm (DA-305) Oil Dump Arm Lifter Size W530 x H180 x D440 mm Weight 10.8 kg
The disposal price has been reduced! (Member prices are not applicable) 2025/10/6 sales price 198,000 yen All power transistors have been replaced, contact cleaning and polishing, etc. have been thoroughly maintained! Luxuriously handmade stereo power amplifier. You can feel the high level of fine texture unique to Class A, and you can feel the good workmanship of this car. It flexibly reproduces female vocals and stringed instruments. The SP terminal is partially chipped or cracked. Serial XD1001279M (Fujisawa Yukishi)
Maintenance information: 2025.10.6 Maintained (all power transistors and small signal transistors replaced, miswiring corrected. Cleaning, polishing, and anti-oxidation treatment of the contact points of each changeover switch and protection relay. DC offset voltage, idle current adjustment)
Accessories: No accessories
Main specifications: Class A stereo power amplifier 50W+50W (8Ω) W468 x H206 x D385 mm weight 27.3 kg
Piano black model The company's new model uses a “solid body tweeter” and “Continuum Cone.” A powerful machine that reproduces more precise and accurate sound images and sound fields using a number of conventional advanced model technologies. It plays all genres of music without excesses or omissions. There are thin threads on the exterior. Serial 5777/5778 (Fujisawa Yukishi)
Maintenance information: 2025.10.24 Operation confirmed
Accessories: instruction manual, original box, saran net, jumper plate, bass reflex sponge
Main specifications: 2-way bass reflex type output sound pressure level 88dB impedance 8Ω playback frequency band 45Hz to 33kHz W200 ✕ H407 ✕ D301 mm weight 9.3 kg
“Virtual Earth” by KOJO TECHNOLOGY. The high-quality textured design with a satin white anodized finish on the top cover is also attractive. From the popular old model FORCE BAR EP, you can feel not only an increase in the surface area of the virtual earth metal laminate, partial material changes, and improvements in S/N, but also improvements in fineness. Serial D49800KK106 (Tamura Eiji)
Accessories: 2 types of earth cables
Main specifications: W80 x H35 x D111 mm, weight approx. 775 g
“Virtual Earth” by KOJO TECHNOLOGY. The high-quality textured design with a satin white anodized finish on the top cover is also attractive. From the popular old model FORCE BAR EP, you can feel not only an increase in the surface area of the virtual earth metal laminate, partial material changes, and improvements in S/N, but also improvements in fineness. Serial D49700KK106 (Tamura Eiji)
Accessories: 2 types of earth cables
Main specifications: W80 x H35 x D111 mm, weight approx. 775 g
“Virtual Earth” by KOJO TECHNOLOGY. The high-quality textured design with a satin white anodized finish on the top cover is also attractive. From the popular old model FORCE BAR EP, you can feel not only an increase in the surface area of the virtual earth metal laminate, partial material changes, and improvements in S/N, but also improvements in fineness. Serial B66400KK106 (Tamura Eiji)
Accessories: 2 types of earth cables
Main specifications: W80 x H35 x D111 mm, weight approx. 775 g
Disposal price has been reduced (member prices are not applicable) 2025/10/2 sales price 398,000 yen Maintained! Levinson's long-selling prime amplifier. A dual monaural configuration that is thoroughly packed into one chassis while keeping the design concept of separation intact. You can be satisfied with all music genres with quality that easily surpasses separate amplifiers. There are dullness and small scratches on the exterior. *Remote control is out of stock. Serial 1307 (Jun Tamai)
Maintenance information: 2025.10.2 Maintained (Rch output terminal (black) replaced and sound output confirmed)
2025.9.11 Maintained (VG board part cleaning/repair Control board backside cleaning/repair DC voltage/DC offset voltage/idling current/other adjustments)
Accessories: power cable, instruction manual ※ remote control missing
Main specifications: 100W+100W (8Ω) XLR input x 2 system RCA input x 3 system gain adjustable (preamp section 0/6/12 dB) W445 x H162 x D483 mm 29.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2025/10/6 sales price 398,000 yen Woofer edge softening treatment has been applied! Comes with a dedicated stand DK-10000 sold separately. Diamond Tone 40th anniversary model DS-10000 klavier. A limited-edition model of 300 sets created by infusing all the sensibility of the company's engineers into a beautiful piano finish reminiscent of crafts. It is a masterpiece that pursues even the smallest sounds one by one. The exterior is dull, and there is slight oxidation on the woofer frame. Serial 14872/14875 (Takahashi Nobuyuki)
Maintenance information: 2025.10.6 maintained (woofer edge softening treatment)
Accessories: cloth cover
Main specifications: 3-way 3-speaker sealed bookshelf type usage unit/27cm aramid honeycomb curved cone type, 5.0 cm boron D.U.d. dome type, 2.3 cm boron D.U.d. dome type, 6Ω 35 Hz to 60000 Hz crossover 600 Hz/5000 Hz dimensions W360 x H625 x D290 mm weight 27 kg stand dimensions W380 x D335 x H275 mm weight 6.2 kg
Disposal price has been reduced (member price not applicable) 2025/10/18 sales price 798,000 yen Maintenance completed product including capacitor replacement! A single amplifier equipped with a vacuum tube “211,” which features brightly shining filaments. It's easier to drive and easier to handle than the 845, which is often compared. It features a slightly round, energetic, and powerful sound. Excellent compatibility with large ALTEC speakers, etc. There are some dullness and scratches due to aging (Yamato Yuki)
Maintenance Information: 2025.10.18 Maintained (22 μF Electrolytic Capacitors and 3 Additions; 3 Resistors; 1 W and 1/2 W Deterioration Replacement; 3 Resistors; 40 μF × 2 Deterioration Exchange; Vacuum Tube 211 Noise Exchange; HUM ADJ. Readjustment; Output Transformer Rewinding Repairs; Vacuum Tube Sockets and RCA Jack Caulking Repairs ※ Other operation checked with AC100V (rated output measured at 8W SP: 8Ω)
*The grid cap of the vacuum tube 310A has been repaired by adhesive. (Please refrain from extracting and inserting as much as possible)
Accessories: none
Main specifications: used vacuum tube GE 211 x 1, GE VT-4C x 1, WE 310A (large punch) x 2, RCA 7-29A x 2
Dimensions and weight W500 x H273 x D364 mm 38.1 kg (all measurements are actual, dimensions include protrusions)
Maintained! Deteriorated parts such as 6 lamps, 8 diodes, 4 capacitors, etc. have been replaced, each switch, volume disassembly, cleaning, etc. have been maintained! While being clear and precise, this is a powerful machine that also has the thickness and intensity of sound of successive Macintosh control amplifiers. It is a famous machine with a deep sense of nostalgia that is compatible with both vintage and modern models. Using the familiar 5-band equalizer, it is also possible to change the desired tone depending on the song. The exterior has a feeling of use such as dullness and small scratches. Serial JHD3072 (Tomonori Asaine)
Maintenance information: 2025.10.24 Maintained (illumination lamp deterioration replacement, push button LED OK, display part hidden due to rubber ring deterioration → replacement. Power supply diodes, C deterioration replacement, pin jack cleaning, each SW VOL cleaning, operation check)
Accessories: copy of instruction manual
Main specifications: built-in monitor amplifier with 5-band equalizer (20W x 2/8Ω), compatible with balanced input/output, PHONO (MM) compatible, W468 x H183 x D432 mm, 12 kg
*The input has been changed to an XLR terminal. Genuine RF mono type. The brilliant, precise, and smooth tone, texture, and high expressiveness are truly CELLO! As for the exterior, there are small scratches and scratches on the top plate. Serial 0388/0388 (Yonejima Satoshi)
Maintenance information: 2025.10.25 Operation confirmed (I checked the interior and confirmed that it has been maintained)
Accessories: power cable
Main specifications: 60W+60W W240 x H110 x D338 mm 6.3 kg
Tokyo soundproof turntable seat using vibration-absorbing rubber. The vibration convergence time is overwhelmingly fast, and it effectively absorbs unwanted vibrations in the frequency band that is important for music playback. The exterior looks like white stains on both sides (Mizusaki Ryo)
Accessories: original box
Main specifications: thickness 4 mm x diameter 291 mm weight 330 g
The price has been reduced. 2025.10.23 Sales price 238,000 yen Each volume switch has been cleaned, 6 capacitors replaced, 5 lamps have been replaced, etc., and maintenance has been carried out with attention to detail! A control amplifier representing the golden age of McKinn. Compared to the C28, I get the impression that the breadth and subtlety of the sound stands out. Even in this age, the rich, glossy tone is still alive and well, and vintage speakers play well (Daiki Goto)
Maintenance information: 2025.10.23 Maintained (each SW, VOL cleaning, lamp deterioration replacement. Auto on fuse disconnection → replacement, push button dismantling and cleaning, AC cord replacement, condenser liquid leak → replacement, pin jack cleaning, fuse holder damage → replacement, operation check (BASS, TREBLE can't take full pictures)
Accessories: manual
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
This MC boost transformer is ideal for SPUs using the No. 6600 JS transformer. The sharp high frequencies and the tenacious sound in the mid and low frequencies make the SPU sound even more energetic. There are dull stains. The exterior has small scratches, paint peeling, etc. (Oikawa Tetsuji)
Maintenance information: 2025.10.14 Operation confirmed
Accessories: none
Main specifications: boost ratio 31 times with bypass function, primary impedance 1.5 ohm/secondary impedance 1.5 kΩ dimensions W90 x H68 x D88 mm weight 420 g
Maintained by the manufacturer! A record player with FR's FR-54 mounted on a DENON DP-3000. The cabinet is a DK-100F, a turntable with precise rotation and a smooth tone, and an arm with a simple form without unnecessary decorations and a stable stability arm, and a very practical system. The exterior feels old, but it is in relatively good condition (Eternity Miraito)
Maintenance information: 2025.9.20 Maintained (lamp replacement (parts removed)). Transistor replacement. Replace the capacitor around the head amplifier. 33/45 rotation, STOP leaf switch cleaning (Other inspection of each part, operation test)
Accessories: instruction manual
Main specifications: DP-3000 servo type direct drive speed 33 1/3, 45 rpm FR54 static balance type short arm effective length 245 mm needle pressure range 0 to 3 g compatible cartridge weight 3 to 20 g overall part W530 ✕ H180 ✕ D435 mm
The disposal price has been reduced! Member discounts are not applicable. 2025/10/16 sales price 158,000 yen Maintained. A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals play a sound that makes you think of jazz. There is a small scratch on one side of the diaphragm (Oikawa Tetsuji)
Maintenance information: 2025.10.16 Maintained (vibration plate installation adjustment, pad dampener deterioration replacement, mounting screw rust, replacement insulation bushing, deterioration replacement terminal part, vibration plate dirt cleaning
DCR (25960 7.6ohm vibrating plate small scratch ant) (25874 7.6ohm vibrating plate scratch pear)
Accessories: none
Main specifications: frequency characteristics 500 to 18 kHz crossover 500 Hz 16 ohm actual measurement 8.5 ohm/8.1 ohm diameter 175 mm height 145 mm approx. 11.8 kg/bottle
The disposal price has been reduced. Member prices are not applicable. 2025/10/22 sales price 798,000 yen First arrival at Hi-Fi Hall. Comes with original box Mono power amplifier from Classé, Canada. Equipped with unique IC Tunnel technology, internal heat dissipation is managed by sensors and processors. At the store, it was connected to the CP-800, which arrived at the same time, and I was able to enjoy jazz, fusion, etc. with a very thick sound. There are no noticeable scratches and it is in good condition (Sasaki Shota)
Maintenance information: 2025.10.20 Operation confirmed
Accessories: instruction manual, power cord, original box, short pin, USB memory
Main specifications: rated output 300W+300W (8Ω) 600W+600W (4Ω) W444 x H223 x D445 mm 34 kg
This is a classic record player for DENON's famous machines of yesteryear. This is a cost performance model of the DP-5000 that uses a direct drive servo turn tape and achieves a stable speed of rotation. Equipped with the SME3009S2imp, which is dedicated to light needle pressure but boasts excellent tracing performance, you can listen to stable record playback (Sasaki Shota)
Maintenance information: 2025.9.27 operation confirmed
Accessories: manual
Main specifications: DP-3000 servo type direct drive speed 33, 45 rpm 3009S2IMP: short arm for light needle pressure, static balance type, needle pressure 0 to 1.5 g, cartridge weight 4 to 9 g, DK-100 cabinet, Rawan material 70 mm, laminated plywood size W530 x H170 x D420 mm
The disposal price has been reduced. Member prices are not applicable. 2025/10/22 sales price 448,000 yen First arrival at Hi-Fi Hall. Comes with original box A high gain preamp with a fully balanced configuration. It is equipped with a whopping 15 input systems, including a USB DAC. The sound quality is a sound with a wide range of scales from low to high frequencies. You can enjoy excellent S/N using carefully selected parts. There are no noticeable scratches and it is in good condition (Sasaki Shota)
Maintenance information: 2025.10.20 Operation confirmed
Accessories: remote control, manual, power cable, original box
Main specifications: Input terminals: USB A x 1, USB B x 1, analog RCA x 3, analog XLR x 2, optical digital x 4, coaxial digital x 3, AES/EBU x 1 W445 x H121 x D445 mm 10.4 kg
*Phono cable is out of stock, currently sold. Grace tone arm for light needle pressure. As expected, the quick response is good for light needle pressure. You can enjoy analog with lighter sound quality. Recommended for those using SHURE's V15 series, etc. There is rust and dullness (Oikawa Tetsuji)
Maintenance information: 2025.8.27 continuity confirmed
Accessories: none
Main specifications: static balance type, total length: 320 mm, execution length: 237 mm, over hang: 15 mm, needle pressure range: 0 to 3 g, 0.25 g steps
The price has been drastically reduced. 2025/10/21 sales price 198,000 yen Maintenance completed! It is equipped with excellent mechanisms such as DBx and EE tape compatibility, and it is still a highly popular car. Compared to other models, the relatively high frequencies extend cleanly, and the sound quality has a strong core without becoming too soft. Of course, the tone is thick and has a calm finish. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.10.5 maintained (reel motor, capstan motor, plunger, brake, tape tension, roll tape height, shaft eccentricity, rattling, pinch roller characteristics/crimping, drive belt, counter belt inspection and adjustment, capstan belt replacement. Head rust removal, frequency characteristics, distortion rate, signal-to-noise ratio, recording frequency characteristics/phase, playback equalizer, recording bias/recording equalizer, input reference level, playback reference level inspection. WOW flutter value 0.05% 190/sec.
VU meter calibration. Noise, poor contact, HP output/microphone input, output output inspection. Tape path inspection, exterior steam cleaning, rust removal, screw replacement, light bulb board short circuit repair, solder correction, freestanding foot installation)
Accessories: copy of instruction manual
Main specifications: 4 tracks, 2 channels, 6 head reels, 26 type, 17 type tape speed 19cm/s, 9.5cm/s frequency characteristics 19cm/s: 30Hz to 34kHz 9.5 cm/s: 30Hz to 24kHz headphones 8Ω power consumption 88W W432 x H452 x D262 mm 22 kg
The price has been drastically reduced. 2025/10/22 sales price 1,480,000 yen 2024/12 maintenance completed. A special cartridge TSD-15 is included. Extremely rare EMT Franz 100V/60Hz specification. It is a full phono equalizer 155th system with a genuine 930-900 suspension. A masterpiece of commercial record players that still hasn't faded. It recreates the performance scene with an overwhelming listening feel and sharpness. Exterior, there is a crack in the center of the turntable mat, one side of the cantilever, other dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.12.20 TSD15 maintained (disconnection repair, damper replacement) 2024.12.14 maintained (930st: motor removed, oiled, adjusted. New forward phase capacitor replacement, speed adjustment felt replacement, main bearing housing detachment, gasket replacement, bearing ball replacement, sealant attachment assembly. Motor bush replacement, turntable anti-noise rubber belt, idler replacement. Output cable terminal replacement (XLR to RCA). Main body chassis lower cushion rubber, EMT930-900 suspension rubber cord replacement. EMT155st: 30 capacitors, semi-fixed VR replacement Board solder correction. audio measurements. Semi-fixed VR replacement, connector contact cleaning. L/R output level adjustment/0.75v @0VU. (Running test)
Accessories: dust cover, copy of instruction manual, power cable, phono cable (RCA) oil
Main specifications: idler drive system aluminum die-cast turntable rotation speed 33 1/3, 45, 78 rpm [tone arm EMT929] dynamic balance type needle pressure range 0 to 5 g [equalizer amplifier 155 st] frequency characteristics 40 Hz to 20,000 Hz input impedance 140 to 200 ohms output impedance 200 to 600 ohms [cartridge TSD-15] MC type output voltage 0.15 mV suitable Needle pressure 2.5 g impedance 24 ohms W541 x H355 x D442 mm (actual measurement)
Maintained by the manufacturer! Create a new dust cover. Shure M44G cartridge included! You can enjoy analog easily. A fully automatic model that allows you to easily enjoy playing records without troublesome settings. It has a repeat function and is also recommended for BGM. It is also suitable as an analog introductory machine. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.10.25 Maintenance completed (arm disassembly and lubrication. Arm position sensor replacement. Replace the capacitor around the head amplifier. Horizontal coil replacement. (Operation sound test)
Accessories: none
Main specifications: quartz lock direct drive fully automatic 33/45 rotation compatible cartridge: dead weight approx. 3 g to 12 g W455 x H130 x D424 mm 9 kg
Exterior repairs, paint, and interior and exterior maintenance for each unit and network have been completed! Late type equipped with 604-8KS. You can enjoy the crisp, exhilarating sound that pops out like Altech. The exterior is also beautifully finished due to maintenance (Oikawa Tetsuji)
Maintenance information: 2025.10.25 Maintained (exterior repair/polishing/full painting)
Saran net replacement unit maintenance: low range side center cap peeling and bonding, terminal cleaning, high frequency side magnetic circuit rust removal/gap cleaning/center adjustment, terminal cleaning network maintenance: frequency characteristic check/switching SW/ATT cleaning, faston terminal terminal replacement, terminal cleaning unit detachment)
Main specifications: impedance 8 ohms output sound pressure level 103 dB playback frequency band 20 Hz to 20,000 Hz W648 x H749 x D509 mm 54.5 kg
Manufacturer maintenance (pickup replacement) completed! Denon's flagship CD/SACD player. The thick mid to low range and the highly textured mid to high range sound were the deciding factors for the best seller. The high level of musicality stands out even when compared to modern players. There are some abrasions on the exterior (Mizusaki Ryo)
Maintenance information: 2025.10.25 manufacturer maintained (laser pickup, loading belt, tray opening/closing sw replacement. The attached remote control was leaking liquid, but I can't get it, so I'm repairing it. Inspection and cleaning of all other parts. (Operation sound test)
Accessories: remote control, power cord, copy of instruction manual
Main specifications: SACD/CD player, 4 DAC, fully balanced output configuration, 2 line outputs (XLR/RCA), digital input/output coaxial, 1 optical system each equipped with pure direct mode, W434 x H150 x D410 mm, 21.8 kg