Maintained! The final model of Ampzilla. A representative American sound with strong, tight low frequencies! The dry, clean-sounding character is the perfect match for vintage speakers of yesteryear. This is a masterpiece machine that briskly drives famous speakers from JBL and Altec. Externally, there are scratches, dullness, and dirt on the panel. (YONEJIMA Satoshi)
Maintenance information: 2025.12.14 Maintained (left CH indicator on → control ICNG → DC check → LR both OK) 2025.11.30 maintained (first stage Tr, servo IC, etc. mounting socket replacement. Replace the output temperature switch. Replace each coupling C and bypass C in the driver board. Check all the others. Rubber foot replacement. Operation check)
Accessories: No accessories
Main specifications: 200W+200W (8Ω) perfect balance configuration W445 × H178 × D229 mm 22.7 kg
An easy-to-use Antray boost transformer with 3 inputs and 3 impedance types selectable in addition to PASS. It is simple and carefully made, and has good balance and precise sound quality, so it can be lifted honestly and firmly. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.12.12 Operation confirmed
Accessories: none
Main specifications: primary impedance 3/10/40 ohm switching, bypass, 3 input systems, W130 x H70 x D186 mm, 2 kg
*Currently sold. This is Victor's wood cone speaker. It was originally part of the system components, but it has a reputation for the sound of the speaker, and it is a popular model even after production has been completed. The subtlety of wood cones creates the brilliance of medium to high tones. The vocals and piano sounds are very beautiful. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.12.12 Operation confirmed
Accessories: saran net
Main specifications: Speaker unit used 8.5 cm wood cone full range W120 x H161 x D239 mm 1.6 kg
Popular 3-tier rack It has a sturdy construction with a metal frame. The size is a space-saving design with the outer dimensions cut down to the last minute and the inner dimensions extended to the last minute. The tight and accurate sound quality brings out the performance of the device. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: spike, spike receiver, instruction manual
Main specifications: 3-tier rack, load capacity up to 50 kg, shelf spacing 190/260 mm, W540 x D484 x H655mm, 31 kg
Manufacturer's maintenance completed! Roxanne's static balance tone arm is standard on masterpiece players such as RADIUS. A separate needle pressure gauge is required for use. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.10.23 Maintained by the manufacturer (all lead wires replaced. Lift lift grease refill)
Accessories: none
Main specifications: static balance, running length: 240 mm, overhang: 17.5 mm, head shell offset angle: 22.9 degrees, needle pressure range: 1.2 to 3.0 g; cartridge dead weight: 5 to 11 g
*Currently sold. A speaker that uses a soft dome tweeter to reproduce glossy high frequencies. In addition to modern high-frequency growth, it has a good balance that takes into account the ease of listening typical of DENON, regardless of music genre. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.12.12 Operation confirmed
Accessories: none
Main specifications: 2-way 2-speaker bass reflex type anti-magnetic design (JEITA) 6Ω 86dB W145 x H233 x D234mm 3.8 kg
Maintenance has been completed, such as switch disassembly and polishing, cleaning of each volume, and interior and exterior inspection and cleaning. This is an attractive premain with a good sound. It is equipped with a large toroidal transformer, so you can enjoy powerful bass reproduction unique to this age. You can see a feeling of use, such as appearance, dullness, marks, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.12.13 maintained (phono circuit resistance exchange switch disassembly and polishing (tone, frequency switching, subsonic, loudness, muting, input selector) volume cleaning, interior and exterior inspection cleaning, pin jack polishing, operation inspection) 2023.8.8 maintained (master volume replacement, output relay replacement, main amplifier circuit transistor, semi-fixed Volume replacement, selector lamp replacement, phono selector, reckout switch disassembly, polishing grease application, solder repair, each volume, switch cleaning, switch guide repair,
(Internal inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 150W+150W (8Ω) with 4 line inputs, phono MM/MC, W466 x H161 x D431 mm 17.5 kg
A vintage Altec driver from the 1950's. While it has a very strong sense of energy, it is also uniquely easy to hear. If you have an Altec system from Yonematsu's early days, please take this opportunity! You can see a feeling of use such as exterior, paint peeling, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.11.14 Maintained (the phosphor bronze plate on the outer drawer part was broken from the root → additional lead wires were soldered and connected. Distortion was confirmed in the sound output, so repair, stop the coil noise, and adjust centering)
Accessories: none
Main specifications: frequency characteristics 500 Hz to 12,000 Hz impedance 24 ohms sensitivity 115.2 dB allowable input 40 W recommended network N-500-C recommended crossover 500 Hz recommended horn H150/H804/1005B W165 D142 mm weight 9 kg
This is the smallest TANNOI system monitor in the studio series. Technology has been introduced from advanced models, and you can enjoy monitor sounds with different nuances from others. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.12.13 Operation confirmed
Accessories: saran net, jumper
Main specifications: 16 cm coaxial 2 way 8 ohm 91 dB bi-wiring connection W230 × H345 × D246 mm 5.7 kg
*Currently sold. Although small, it has the elegant, rich, and warm sound quality common to all Tannoy speakers. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.12.13 Operation confirmed
Main specifications: impedance 6Ω, maximum input, 70W, W160 x H230 x D145 mm, 2.85 kg
2024 maintenance completed! A popular preamp sold during the heyday of analog. The mid-range is more glossy and has a sexier vibe than the one after C29. That rich sound can truly be said to be a preamp representing the golden age of McKinn. You can see a feeling of use, such as appearance, dullness, and abrasions. Serial AK9084 (Matsumoto Tsuyoshi)
Maintenance information: 2025.12.14 operation confirmed 2024.4.19 maintenance (each SW, VOL cleaning, pin jack cleaning, lamp deterioration replacement, panel peeling correction, pin jack caulking, additional block capacitor installation, shield cable earth solder treatment, operation check)
Accessories: copy of instruction manual
Main specifications: 4 input terminals, 4 PHONO input systems, 2 pre-out systems, W430 x H140 x D365 mm, 13.8 kg
Speaker cable 1.3 m pair is the entry model for the company's speaker cable. In addition to the transparency and wide range, the bright and intense sound is exhilarating. There is stickiness on the sheath (Takahashi Nobuyuki)
Maintenance information: 2025.12.14 continuity confirmed
Accessories: none
The final model of the Sansui α507 series. This is an entry class for the NRA series, which is highly transparent and crisp. This is an attractive car with a good balance and luster. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.11.21 Operation confirmed
Accessories: instruction manual
Main specifications: 60W+60W (8Ω) line input 5 systems phono 1 system (MM/MC switching) W432 x H165 x D450 mm 15.5 kg
*5th generation of the Hingeless SL-1200 series. This is a high-grade model manufactured to commemorate the 30th anniversary. Its accuracy and durability are outstanding among many players, and it features clear sound with clear outlines. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.11.24 Operation confirmed
Accessories: dust cover, weight, subweight, turntable seat, slip mat, EP adapter, copy of instruction manual
Main specifications: manual quartz direct drive 33/45 rotation universal S-shaped tone arm static balance type needle pressure adjustment range 0 to 4 g W453 x H162 x D353 mm 11.7 kg
The price has been drastically reduced. 2025/11/29 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.11.29 Operation confirmed
Accessories: power cable, RCA cable (above external product), a copy of the instruction manual
Main Specifications: Direct Drive Turntable System Brushless DC Motor RPM 33, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Mass/No Auxiliary Weight 5.6 to 12.0 g, 14.3 to 20.7 g (including head shell) when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (including headshell) W453 mm× H173 mm x D372 mm approx. 11.5 kg
The price has been drastically reduced! 2025/12/9 sales price 128,000 yen Maintained by Triode! This model is equipped with an MM phono equalizer and is compatible with a remote control for volume adjustment. In addition to dividing the transformer into 3 parts, changes have also been made, such as omitting the PRE-IN terminal, and the power supply LED is orange. In addition to the firm extrusion characteristic of vacuum tube amplifiers, it is a product with a delicate and clear tone. The exterior has scratches and dullness. Serial 12060535 (Fujisawa Yukishi)
Maintenance information: 2025.12.9 manufacturer maintained (selector polishing, volume replacement, remote control repair)
Accessories: remote control, instruction manual, power cord
Main specifications: KT88EH x 4, 12AX7 x 1, 12AU7A x 2 output 45W+45W W340 x H185 x D315 mm 15 kg
The price has been drastically reduced. 2025/12/5 sales price 128,000 yen maintenance including replacement of 26 deteriorated electrolytic capacitors! This amplifier has a reputation for use in multiple systems. The original powerful sound, which has a wide range and is clear, has been revived. It is thin and can be used for a wide range of purposes, from sub to multi-use. There is a small dull wound (Sasaki Shota)
Maintenance information: 2025.12.5 Maintained (Electrolytic capacitors, tantalum capacitors, semi-fixed resistors, and lamps will be replaced. Power switch installation correction. Transfer switch, relay disassembly contact cleaning. (We will clean the panel, rear terminals, and housing)
Accessories: none
Main specifications: 80W+80W (B grade) 18W+18W (A grade) DC amplifier configuration W480 x H80 x D380 mm 8.6 kg
The price has been drastically reduced. 2025/12/5 sales price 128,000 yen, maintenance including replacement of 27 deteriorated electrolytic capacitors! This amplifier has a reputation for use in multiple systems. The original powerful sound, which has a wide range and is clear, has been revived. It is thin and can be used for a wide range of purposes, from sub to multi-use. There is a small dull wound (Sasaki Shota)
Maintenance information: 2025.12.5 Maintained (Electrolytic capacitors, tantalum capacitors, semi-fixed resistors, and lamps will be replaced. Transfer switch and relay disassemble and clean. (We will clean the panel, rear terminals, and housing)
Accessories: none
Main specifications: 80W+80W (B grade) 18W+18W (A grade) DC amplifier configuration W480 x H80 x D380 mm 8.6 kg
The price has been drastically reduced! 2025/9/1 sales price 258,000 yen All switches were disassembled and maintained, such as contact cleaning, etc. in 2025/5! Macintosh's classic preamp. It reproduces clear mid-range and glossy tones. This model should be used by music fans who enjoy all kinds of sources. The full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. There are small scratches and partial peeling on the exterior. Serial JEB8721 (Jun Tamai)
Maintenance information: 2025.5.14 maintained (RCA terminal solder fixed push switch, rotary switch, all switches disassembly contact cleaning contact grease coating main volume disassembly contact polishing cleaning conversion board creation replacement electrolytic capacitor replacement panel lamp replacement panel peeling correction each input/output operation check)
Accessories: copy of instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
The disposal price has been reduced! (Member discounts are not applicable) 2025/12/3 sales price 278,000 yen This is one car that has undergone thorough maintenance from exterior polishing to oil finishing, saran net cleaning to the unit network! Popular cork baffle type STIRLING HW Using a 25 cm coaxial unit, this HW has a reputation for its good sense of positioning and sound quality typical of TANNOY with a high texture. Compared to recent Hardedge series, it is supple and has a nice tone. Serial 100395/100515 (Yonejima Satoshi)
Maintenance information: 2025.12.3 maintained (Unit maintenance: magnetic circuit gap cleaning center adjustment for both low and high frequencies. Network maintenance: frequency characteristics check, ATT part contact cleaning, terminal cleaning, faston terminal replacement. Exterior repair/polishing/oil finish. Rear baffle repair/painting. (Saran net cleaning/repasting, frame repair)
Accessories: saran net, instruction manual, keys
Main specifications: coaxial 2-way speaker impedance 8Ω maximum input 250W output sound pressure level 90dB W486 x H700 x D310 mm 22 kg
The price has been drastically reduced! 2025/12/10 sales price 1,080,000 yen Speaker system S1 that creates innovative values sent out by MAGICO. The M-COAT model in a special color has arrived. In addition to a 7-inch woofer with a carbon nanotube seat and a driver with a lightweight and strong vibration system, an enclosure using seamless teardrop airgrade aluminum alloy extraction material and cast aluminum material creates a realistic sound image. The exterior is good with no conspicuous scratches. Serial 00215/00216 (Yonejima Satoshi)
Maintenance information: 2025.12.10 good sweep check
Accessories: grill, spike holder, wrench
Main specifications: 2 way/2 speakers sealed floor stand type efficiency 86dB 1W/1m impedance 4Ω W248 x H1170 x D222 mm weight 34 kg
The disposal price has been reduced. Member prices are not applicable. 22025.4.7 sales price: 108,000 yen Maintenance has been completed, including 6 output MOS transistors, replacement of 8 other transistors, and disassembly and polishing of selectors. A thick, roomy, warm color premain amplifier. It makes me listen carefully to the music in an authentic style, and it plays female vocals etc. well. It has a built-in MC transformer that is great for those who listen to records. There are small scratches and dullness appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2025.4.7 maintained (6 defective single-channel output MOS transistors replaced, 8 other drive transistors replaced for sound, other speaker relays replaced due to deterioration, other selector switches disassembly contact polishing grease application, other idling, offset electrical adjustment, sound output confirmation for each input/output connection)
Accessories: copy of the manual
Main specifications: Class A output 35W+35W (8Ω) Class AB output 140W+140W (8Ω) 220W+220W (4Ω) phono mm/MC compatible size W465 x H146 x D452 mm weight 23 kg
The disposal price has been reduced. Member prices are not applicable. 2025/10/30 sales price 79,800 yen A driver horn that combines the company's 1-inch driver with an 18Sound horn and XT1086. The horn has an oval shape and is made of die-cast aluminum. The clear sound with good response is attractive. Please enjoy it according to your favorite woofer (Oikawa Tetsuji)
Maintenance information: 2025.10.16 Operation confirmed
Accessories: none
Main specifications: DE500:1 inch driver, 8 ohms, 107 dB input, 50/100 W, frequency characteristics, 1000 to 18000 Hz, recommended crossover, 1.5 kHz, W105 x D65 mm
XT1086:800 Hz cutoff frequency for 1 inch W260 x H215 x D126 mm
The price has been reduced. 2025/11/14 sales price 69,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance even when combined with various woofers and tweeters (Eternity Miraito)
Maintenance information: 2025.11.14 maintained (one side is not original, so it was replaced and adjusted to JBL's original D16R2420
Pad dampener, vibrating plate mounting screw rust replacement
Insulating bushing deterioration replacement
DCR (25555 5.6 ohm vibrating plate, scratch pear)
(25561 5.3 ohm vibrating plate with no scratches))
Accessories: none
Main specifications: 1 inch driver throat diameter 25 mm 16 ohms (measured 10/12 ohms) 118 dB frequency characteristics 800 Hz to 20 kHz crossover frequency 500 Hz or more 5.1 kg
The price has been drastically reduced. 2025/11/26 sales price 45,000 yen ※1 bottle only. Comes with a rubber stand GENELEC POWERED MONITOR SPEAKER. It is an ideal near-field system for monitoring. The high-rigidity aluminum enclosure not only looks good, but also enables a perfect listening experience. It is in good condition without major damage (Oikawa Tetsuji)
Maintenance information: 2025.11.26 Operation confirmed
Accessories: power cable, rubber stand
Main specifications: frequency characteristics 58Hz-20kHz (-6 dB) amplifier output LF40W/HF40W output sound pressure level 108 dB H285 × W189 × D178 mm weight 5.6 kg
The price has been reduced. 2025/12/5 sales price 99,800 yen GENELEC powered monitor speaker. It is an ideal near-field system for monitoring. The high-rigidity aluminum enclosure not only looks good, but also enables a perfect listening experience. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2025.12.5 operation confirmed
Accessories: brand new stand, power cable
Main specifications: frequency characteristics 58Hz-20kHz (-6 dB) amplifier output LF40W/HF40W output sound pressure level 108 dB H285 × W189 × D178 mm weight 5.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2025/6/3 sales price 89,800 yen Manufacturer maintained! This is a classic record player for DENON's famous machines of yesteryear. This is a cost performance model of the DP-5000 that uses a direct drive servo turn tape and achieves a stable speed of rotation. Equipped with the SME3009S2imp, which is dedicated to light needle pressure but boasts excellent tracing performance, you can listen to record playback with a sense of stability.
Maintenance information: 2025.6.3 manufacturer maintained (capacitor and transistor replacement around the head amplifier. 33/45RPMSW, STOPSW, LEAF SW CLEANING Speed adjustment, operation test.)
Accessories: copy of the manual
Main specifications: DP-3000 servo type direct drive speed 33, 45 rpm 3009S2IMP: short arm for light needle pressure, static balance type, needle pressure 0 to 1.5 g, cartridge weight 4 to 9 g, DK-100 cabinet, Rawan material 70 mm, laminated plywood size W530 x H170 x D420 mm
The price has been reduced! 2025/12/12 sales price 278,000 yen Maintained! This is the company's best-in-class 845 single power amplifier, which has a strong visual presence. It is a high quality vacuum tube power amplifier with an impressive pure sound, even though no stinging sound is felt at all. There are small scratches and dullness on the exterior. Serial 77374 (Tamura Eiji)
Maintenance information: 2025.12.12 Maintained (replacement voltage amplifier part, earth pattern correction, solder correction, vacuum tube pin cleaning, board position correction due to decoupling capacitor coating deformation ※ bias check output audio check (output approx. 20W confirmed). 6SN7 → 300B → 845 single (self-biased))
Accessories: power cable, instruction manual
Main specifications: 300B x 2 x 845 x 2 6NS7EH x 2 300B drive UV-845 single power amplifier 20W+20W damping factor 4 or more power consumption 400W size W470 x H305 x D420 mm 42.1 kg
The disposal price has been reduced. Member prices are not applicable. 2025/11/27 selling price 79,800 yen The ultimate version of the P-1. Pure A grade specification, which is rare for a headphone amplifier, so you can enjoy detailed and clear sound. There are scratches, scuffs, etc. on the top plate*The power cable is not genuine (Oikawa Tetsuji)
Maintenance information: 2025.11.27 Operation confirmed
Accessories: Power cable (non-genuine)
Main specifications: 2W+2W (8Ω) 1W+1W (16Ω) high sound quality feedback circuit “ODNF3.0A”, 2 headphone outputs, 1 RCA/XLR input each, W440 x H82 x D408 mm 8.3 kg
The price has been reduced. 2025/11/23 sales price 49,800 yen This is a tubular condenser headphone driver that maximizes the power of STAX ear speakers. At the time, it was used as a set with Lambda Nova, but it can also be enjoyed with other STAX ear speakers. There are minor scratches on the front panel on the exterior (Ryo Mizusaki)
Maintenance information: 2025.11.23 Operation confirmed
Accessories: instruction manual, power cable, connection cable, original box
Main specifications: Vacuum tube used 6CG7 x 2 W195 x D375 x H103 mm 3.4 kg