※There is no IN/OUT of TAPE2, and the AUX and TUNER INPUT button locks are sweet, so it's cheap. Maintained! AGI's popular 511 preamp. The speedy and straight sound expression goes well with classical jazz, rock, etc., and also matches well with vintage speakers. The power is turned on when the outlet is inserted, but it is the original specification (the front switch is for a service outlet). In addition to the exterior and described above, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.5.12 maintenance completed (power supply resistor, film C short diode replacement, each SW cleaning) 2022.3.17 maintenance (attached to pin jack TAPE1 input and output. TAPE2 (input/output) hole blocking, operation check) 2022.3.10 maintenance (each SW, Vol cleaning, RCA earth cleaning, hot side pin soldering treatment)
Accessories: none
Main specifications: 1 phono input system (MM compatible), 2 line input systems, frequency characteristics 20 to 20 kHz, W430 x H165 x D285 mm, approx. 8.7 kg
The price has been reduced. 2026/5/9 sales price 198,000 yen manufacturer maintenance completed! Marantz's classic pre-main amplifier. Equipped with a digital volume that can be finely adjusted. The SN is higher than the previous model, and the texture in the mid to high range has been improved. The sound field is also widely secured, and the sound is of a higher quality than the price. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.5.7 manufacturer maintenance completed (speaker relay replacement, inspection of each part, operation test)
Accessories: remote control, copy of instruction manual, power cable
Main specifications: input LINE x 3, XLR x 1, PHONO (MM/MC) x 1 with PRE OUT 100W+100W (8Ω) W440 x H168 x D444 mm 26.6 kg
Maintenance such as disassembling switches and cleaning contacts was completed in 2024/10. Macintosh's classic preamp. It reproduces clear mid-range and glossy tones. This model should be used by music fans who enjoy all kinds of sources. The full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. Small scratches and peeling areas can be seen on some panels. Serial JEB9594 (Fujisawa Yukishi)
Maintenance information: 2024.10.16 maintenance (each SW VOL cleaning, pin jack cleaning, glass panel peeling correction, FET defect replacement, distortion → film C replacement, push button dismantling cleaning) 2024.10.10 maintenance (refining each volume disassembly contact, assembly after applying protective grease. (Check operation with an oscilloscope)
Accessories: There are no accessories
Main specifications: 100V specification equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Audio-Technica's classic disc stabilizer. Recommended for those who don't have a stabilizer as an introduction. The exterior is dull, and it is in a state where there is a feeling of use (permanent future)
Accessories: none
Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
Shure's classic needle pressure gauge. Needle pressure can be adjusted in 0.05g increments. Since there are 2 measurement positions, tracking forces can be measured up to 3 grams. (TAMURA Eiji)
Maintenance information: 2026.5.9 operation confirmed
Accessories: original box instruction manual
Main specifications: measurement range 0 to 3.0 g dimensions W140 x H15 x D25 mm weight approx. 20 g
Shure's classic needle pressure gauge. Needle pressure can be adjusted in 0.05g increments. Since there are 2 measurement positions, tracking forces can be measured up to 3 grams. (TAMURA Eiji)
Maintenance information: 2026.5.9 operation confirmed
Accessories: original box
Main specifications: measurement range 0 to 3.0 g dimensions W140 x H15 x D25 mm weight approx. 20 g
The disposal price has been reduced. Member discounts are not applicable. 2026/4/30 sales price 448,000 yen Top model in the No. 380 series. Genuine Harman This is the pinnacle of the 380 series, where sound quality has been improved by introducing high-quality parts. The high mid to high range with lots of information is attractive, clear, and smooth. You can also enjoy classical string music and vocal music with intonation quality (Murakoshi Yoichi)
Maintenance information: 2026.4.29 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: full balance circuit, 4 line inputs, 2 balanced inputs, 2 analog outputs, W400 x H98 x D364 mm, 10 kg
*Currently sold. There is no problem with operation, but since TW is crushed on both sides, it is inexpensive. NHT desktop-sized speakers There is a limit to bass reproduction even when viewed from the size, but it makes you hear delicate and smooth tones for classical and vocal playback. It doesn't require much bass, and if you want to enjoy music at a low volume, it will demonstrate its ability in 12 minutes. The TW is crushed on both sides, and there are many scratches on the exterior (Eternity Miraito)
Maintenance information: 2026.5.8 operation confirmed
Accessories: none
Main specifications: 2 way dimensions W160 x H260 x D170 mm weight 3.6 kg
※There is a slight difference in length on the left and right. Balance cable A balance cable designed to achieve the best cost performance produced by 0.6 m pair sound house. Metal connectors are used for the 6mm diameter cable to achieve both ease of use and durability (Murakoshi Yoichi)
Maintenance information: 2026.5.6 continuity confirmed
Accessories: none
※1 bottle only. Balance cable A balance cable designed to achieve the best cost performance produced by 0.6 m pair sound house. Metal connectors are used for the 6mm diameter cable to achieve both ease of use and durability (Murakoshi Yoichi)
Maintenance information: 2026.5.3 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2026/2/28 sales price 298,000 yen Maintenance completed in 2017/2. Furniture-like vintage speakers It is slightly inefficient and requires power, but the low range with a sense of scale and the astringent mid-range are attractive. I think it goes well with classical and mood music. In addition to stains on the exterior and saran net, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2017.2.19 Maintained (exterior cleaning, top plate polishing/clear finish. Woofer part: unit detachment/terminal replacement, magnetic circuit slit cleaning, anti-rust edge, anti-noise maintenance set. Tweeter part: Cone-cured urethane removal. Slit anti-rust Magnetic circuit coil replacement and maintenance. B-199BC Part: Magnetic circuit slit cleaning, anti-corrosion, edge-free maintenance, etc.)
Accessories: none
Main specifications: 2 way 3 speakers sealed floor type low range 30 cm cone type 5 cm cone type x 2 allowable input 50 W playback frequency 40 Hz to 20 kHz crossover frequency 2.5 kHz impedance 8 ohms W686 x H762 x D409 mm approx. 41 kg
The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance even when combined with various woofers and tweeters. There are small scratches, paint peeling, and there is some small corrosion on the diaphragm (Sasaki Shota)
Maintenance information: Maintained on 2012.8.11 (magnetic circuit overhaul, operation adjustment, replacement of sound absorbing urethane material)
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Full maintenance has been completed, such as replacing 54 deteriorated capacitors and disassembling all switches and cleaning contacts! Macintosh's classic preamp. It reproduces clear mid-range and glossy tones. This model should be used by music fans who enjoy all kinds of sources. The full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. It is a relatively beautiful individual for its age. Serial JEB8569 (Fujisawa Yukishi)
Maintenance Information: 2026.5.2 Maintained (Loudness Volume Disassembly Contact Cleaning) 2026.4.11 Maintained (Rear RCA Processor Terminal Contact Cleaning). All rotary switches, push switch disassembly, contact cleaning, and contact grease application. Men volume disassembly contact cleaning. Other volume contact cleaning. Replace 54 electrolytic capacitors. Panel lamp replacement In-panel peeling correction. The knobs are fixed by adhesive. Internal and external cleaning. (Check the operation of each input/output)
Accessories: instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Maintenance such as disassembling all switches and cleaning contacts was completed in 2025/5. Comes with a cabinet. Macintosh's classic preamp. It reproduces clear mid-range and glossy tones. This model should be used by music fans who enjoy all kinds of sources. The full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. The exterior has dents and small scratches on the wood cab. Serial EB6827 (Yonejima Satoshi)
Maintenance information: 2025.5.27 Maintained (each SW/VR disassembly contact has been repolished, 5 lamp fixing grommets, 5 lamps replaced. Front panel and knob cleaning. Each operation was confirmed, waveform confirmed, and sound output tested.) Maintained on 2012.4.26 (87 capacitors have been replaced*Nippon Chemi-Con KMG, KME, and SME are used for both capacitors. Replace 1 IC due to unstable operation. VR and SW cleaning rework. Pin jack cleaning. (Internal and external cleaning)
Accessories: copy of instruction manual
Main specifications: 100V specification equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
Steel stand for JBL L82 Classic By adding an elevation angle, the directional axis of the tweeter is directed to the listening position, and the frequency response, sound image, and sound field reproducibility are improved. Of course, it can also be used with other medium speakers, etc. There is a peeling defect on part of the sponge on the top plate (Murakoshi Yoichi)
Accessories: none
Main specifications: W330 x H448 x D360 mm Top plate: W254 x W254 mm Weight 5.4 kg
A classic disc stabilizer. The moderate weight gives a sense of stability for playing records. There is color fading due to sunburn (Tomoho Asaine)
Accessories: none
Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
The classic 101 mm small speaker. One full range shot provides good coverage from bass to treble. It features a persuasive, bright, and tense sound. Since it is small, it can be placed anywhere, and you can enjoy the sound coming out of the front even at low volume. Small scratches and threads can be seen. Serial 639217, 639218 (Fujisawa Yukishi)
Maintenance information: 2026.3.29 Operation confirmed
Accessories: saran net
Main specifications: 1 way 1 speaker impedance 6Ω maximum input 150W output sound pressure level 86db W232 × H154 × D172 mm 2 kg
Maintenance has been completed for the main volume and various switches, such as disassembly, polishing, and cleaning! Sony's classic 333 series model. The strengthened power supply makes the sound pressure feel solid and slightly appealing. Sounds with a sense of weight proportional to appearance are unique to this era. As for the phono circuit, you can enjoy the thick, sharp sound of analog discs with both MM and MC. There is a scratch on the wood panel on the exterior (Mizusaki Ryo)
Maintenance information: 2026.2.18 maintained (maintenance details/ ① main volume dismantling and cleaning ② switch disassembly and polishing (input selector, direct selector, speaker, mode, reckout, cartridge) ③ push switch disassembly and polishing (2 tone, T-over, source direct, mute, subsonic) ④ output relay replacement ⑤ power amplifier circuit part Sankin film resistor replacement ⑥ other volume (Cleaning, solder repair, ground reinforcement, interior and exterior inspection and cleaning, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 105W+105W (8Ω) with phono MM/MC W470 x H165 x D435 mm 21.2 kg
Maintenance has been completed for the main volume and various switches, such as disassembly, polishing, and cleaning! Sony's classic 333 series model. The strengthened power supply makes the sound pressure feel solid and slightly appealing. Sounds with a sense of weight proportional to appearance are unique to this era. As for the phono circuit, you can enjoy the thick, sharp sound of analog discs with both MM and MC. The exterior has a feeling of use such as rust, small scratches, and dullness. Serial 211070 (Takahashi Nobuyuki)
Maintenance information: 2026.2.18 Maintained (main volume dismantling, cleaning, output relay replacement, switch disassembly and polishing (input selector, direct, reck-out, cartridge, speaker, mode, tone, source direct, subsonic, muting) power amplifier part resistor replacement solder main part repair earth enhancement volume sound wave cleaning pin jack polishing, interior and exterior cleaning, bias check, operation inspection)
Accessories: none
Main specifications: 105W+105W (8Ω) with phono MM/MC W470 x H165 x D435 mm 21.2 kg
Maintenance has been completed for the main volume and various switches, such as disassembly, polishing, and cleaning! Sony's classic 333 series model. The strengthened power supply makes the sound pressure feel solid and slightly appealing. Sounds with a sense of weight proportional to appearance are unique to this era. As for the phono circuit, you can enjoy the thick, sharp sound of analog discs with both MM and MC. There are line scratches and bumps on the exterior. Also, there are collapses and creases on the side panels. Serial 203598 (Tamura Eiji)
Maintenance information: 2026.2.3 Maintained (main amplifier section FET, adjustment volume, deterioration resistor replacement. Switch disassembly and polishing (input selector, direct, mode, speaker, recout, muting, subsonic, turnover, cartridge selector) main volume dismantling and cleaning. Output relay replacement. Earth terminal repair. Solder repair. Internal inspection and cleaning, pin jack polishing, bias adjustment, running test. *Please note that if you turn the SP terminal more than necessary, it will break. (The relay operates for about 15 seconds.)
Accessories: none
Main specifications: 105W+105W (8Ω) with phono MM/MC W470 x H165 x D435 mm 21.2 kg
Maintenance such as disassembly of all switches and contact cleaning etc. was completed in 2025/5! Macintosh's classic preamp. It reproduces clear mid-range and glossy tones. This model should be used by music fans who enjoy all kinds of sources. The full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. There are small scratches and partial peeling on the exterior. Serial JEB8721 (Tomonori Asaine)
Maintenance information: 2025.5.14 maintained (RCA terminal solder fixed push switch, rotary switch, all switches disassembly contact cleaning contact grease coating main volume disassembly contact polishing cleaning conversion board creation replacement electrolytic capacitor replacement panel lamp replacement panel peeling correction each input/output operation check)
Accessories: copy of instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
The disposal price has been reduced. Member prices are not applicable. 2025/11/21 sales price 50,000 yen JBL's classic front load enclosure 4560BK. You can experience the thick, energetic low frequencies unique to professional models. Metal stand with casters, with self-made wings. The screws on the back plate are missing, and there are only 2 screws on both sides. The wing plate is chipped and the screw is loose. The unit looks like it came with a D-130A-E. There are stains and stains on the exterior (Suzuki Keita)
Accessories: self-made wing, metal stand with casters ※ missing back screws
Main specifications: enclosure (including wings): W1667 x H915 x D625 mm 48.95 kg/1 (actual measurement) caster stand: W760 x H295 x D610 mm 11.25 kg/1 unit (actual measurement)
※1 bottle only. The horn used in the company's CP12II. Details are unknown. According to actual measurements, the throat diameter is 42 mm and the screw pidge is 104 mm.
Accessories: none
Main specifications: W300 x 205 x D165 mm 700 g throat diameter 42 mm screw fidge 10.4 mm (actual measurement)
※Shipping service. Special Issue No. 192 = Modern High End Speakers with [Classical] [Popular] Their Diverse Musical Expression/Thorough Audition of New Fall Models (Esoteric = K01X/K03X, Luxman = D08U/D06U, Vivid Audio = G4 GIYA, Magnepan = Mg3.7i, TAD = TAD Compact Evolution One, Weiss = Medus, Boulder = 2110, octave = HP700, Einstein = The Poweramp, Mark Levinson = No. 585, Kronos Audio = Sparta+Helena, Tekdus = TDC01 Ti)/Excellent Recordings in the Digital Age 20 Unknown Must-Listen Editions/Isabelle Faustong Interview/ Published 2014.9.2. Since the photograph is a sample, the actual product may be broken or there may be markings etc.
※Shipping service. Special Feature = All of the Latest Bookshelf Speakers (top) /Thinking about Audio Criticism (Sugano Okihiko) /Audio Life (Gomi Kensuke)/Published Models: PIONEER/SC-3000, SM-3000 LAX/L308 TEAC/TN-400 MICRO/MR-422, MR-622 PIONEER/CS330, CS-550 ELECTRO VOICE/SENTRY3 BOZAK/B-410 CLASSIC DUAL/DUAL701 MACINTOSH/MAC1900 JORDAN WATTS/JODRELL, JUPITER TLS GOLDRING/G820 SUPER E STANTON/60EE PICKERING/UV-15 2400Q LAX/L504, L-507 NIKKO/R-5000 JIMTEC/M-100, V-3 NAPOLEX/SS-3, ES- 100 KLIPSCH/CORNWALL GOODMANS/DIMENSION8 FISHER/ST-500, ST-530, ST-550 AIWA/AP-2050 TECHNICS/AP-2050, SL-120 ROTEL/RP-1000 GARRARD/ZERO100 THORENS/TD125MK2B MICRO/VF-6000, M-8000 TECHNICS/RS- 745U, RS-728U AIWA/AD-5500 INPERIAL/MK-1 Since the photograph is a sample, the actual product may be broken or there may be markings etc.
Mount adapter compatible with 35mm diameter speaker stands. This adapter is used when mounting speakers that do not have a hole in the bottom (Tetsuji Oikawa)
Main specifications: load capacity approx. 30 kg, stand mount diameter: 35 mm, base thickness: approx. 8 mm