The disposal price has been reduced. Member discounts are not applicable. 2025/10/6 sales price 1,480,000 yen Exterior cleaning, unit gap cleaning, etc. have been overhauled in 2022! Officially imported by TEAC Genuine TEAC autograph equipped with a TANNOY K3808 unit. The Shinkosha enclosure, which was manufactured with a license from the home country of England, was particularly appreciated for its good sound, and is characterized by a rich sound field reproduction that sounds loud like an autograph. The core K3808 coaxial 2-way unit is designed based on the famous monitor Gold and uses a gathered hard edge with good response. Coupled with the clear and sharp mid-high range, it creates a firm and majestic mid-low range (Murakoshi Yoichi)
Maintenance information: 2024.3.11 maintained (terminal replacement (used product of the same shape), and unit detachment/sweep test) 2022.3.29 maintenance (exterior repair/cleaning, top plate polishing/painting, saran net cleaning/reinstallation, unit maintenance (both low and high frequencies: cleaning within the magnetic circuit gap, center adjustment, center cap attachment), network maintenance (terminals, bridge plates, screws Remove, remove rust, acid wash, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check input/output waveform and balance, check sound output))
Accessories: none
Main specifications: 2-way, 1 speaker, all-horn system, corner type, 2-way unit (K3808), frequency characteristics, 50 Hz to 20,000 Hz, nominal impedance, 8 ohms, output sound pressure level, 96 dB, crossover frequency, 1,000 Hz, crossover frequency, 1,000 Hz, W1,070 x H1,525 x D670 mm, weight approx. 85 kg
7 months since purchase! A tube control amplifier boasting the highest quality ever, by condensing the technology and know-how of airtight preamp development. The highest quality parts carefully selected for the company's traditional monocoque body are used. The ease of use of the 2 phono systems, equalizer OUT terminals, etc. is also amazing. There is a light scuff on the top surface (Murakoshi Yoichi)
Maintenance information: 2025.10.23 sound output confirmed
Accessories: instruction manual, power cable
Main specifications: input PHONO MM x 2 systems, LINE x 3 systems with PHONO output W400 x H90 x D260 mm 9 kg
RCA cable 0.75m pair finished product, uses an amorphous alloy shield, fluorine resin insulator, is a high CP model with high resolution, tightens well, and above all else boasts a beautiful flat balance (Murakoshi Yoichi)
Maintenance information: 2025.10.19 continuity confirmed
Accessories: original box
Maintained! First Airtight power amplifier. A versatile unit with hidden potential that sounds leisurely from floor type to bookshelf. The firm tone, which stands up well and is highly transparent, gives an exhilarating feeling in a good sense that makes you forget about tube amplifiers. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.10.19 Maintenance completed (input volume and smooth capacitor exchange, input switch disassembly, cleaning, vacuum tube pin cleaning, DC voltage and bias check output sound 8Ω 36W confirmation, interior and exterior cleaning)
Accessories: none
Main specifications: 36W+36W (8Ω) EL34/6ca7PP frequency characteristics 20Hz to 20kHz load impedance 4Ω/8Ω W368 x D231 x H293 mm 22 kg
The disposal price has been reduced. Member discounts are not applicable. 2025/10/12 sales price 1,100,000 yen Maintenance completed! The highest peak of the K2 system with a small baffle area and perfect unit balance with the radial horn. It is a model with low distortion, a smooth rise, thick low frequency, and tight expression that makes you feel that it is capable enough even now. Serial J949-010176 J949-010178 (Murakoshi Yoichi)
Maintenance information: 2025.7.2 Maintained (exterior repair/cleaning. Driver maintenance: magnetic fluid removal in the magnetic circuit, gap cleaning, center adjustment)
Accessories: instruction manual, saran net, spike holder, jumper (general purpose)
Key Specifications: Alnico Magnet 15inch Woofer/ 1500Al Neodymium Magnet 3inch Driver/ 435BE Neodymium Magnet 1inch Tweeter/045BE 8Ω 400W 94dB W508 x H1,295 x D375 Weight 90 kg
Maintained! Lux Monopower With a push-pull operation, you can enjoy a powerful sound with plenty of room. Furthermore, due to monaural driving, it is a pair with excellent localization that fits perfectly on the left and right. The well-built 1.6 mm chassis etc. are also attractive. There are small scratches and scratches on the exterior. Serial W313210397/W31210398 (Yonejima Satoshi)
Maintenance information: 2025.9.20 Maintained (ATT decomposition polishing cleaning protective agent applied. Vacuum tube pin cleaning. Remove the resin cover and clean the steel chassis. Increase and tighten the screws. Bias adjustment. Output check. (Confirm 35W output at 8Ω load)
Accessories: No accessories
Main specifications: Vacuum tubes used (for 2 units) KT88 x 4 6CG7 x 2 12BH7A x 2 5U4GB x 2 6X4WA x 2 output 40 W x 2 power consumption 340 W frequency characteristics 5 Hz to 30 kHz SNR 90 dB or more dimensions W220 x H172 x D455 mm weight 17 kg/unit
Both the interior and exterior were maintained in November 2022! The strength of the extrusion of the entire range and the clear sound are truly sounds unique to the heyday of JBL. The mid-high range with a unique sense of spaciousness and strong linearity makes hard bop and trumpet sounds pleasant. The sense of volume in the mid to low range is also attractive not found in modern speakers. There are many scratches and abrasions on the horn area. Serial 267124/267551 (Fujisawa Yukishi)
Maintenance information: 2022.11.1 maintenance completed (exterior repair/polishing/oil finish, front and rear baffle/horn painting, saran net replacement. Woofer edge replacement. Driver magnetic circuit rust removal/gap cleaning/center adjustment. Since the network terminals have already been replaced, the wiring has been redone and tightened, the internal connection terminal (Faston) is replaced with a new one, ATT disassembly contact cleaning/contact grease is applied, frequency characteristic measurement checks (~ 42 kHz) are performed, and the original capacitor is continuously used for good results, input/output waveform and balance confirmation, and sound output check)
Accessories: saran net
Main specifications: 2-way bass reflex, 30cm woofer, frequency band, 40Hz to 16kHz, impedance, 8Ω, sound pressure level, 91 dB, dimensions W406 x H635 x D311 mm, weight 26 kg/book
Maintained! This is Sony's entry-class premain amplifier. It uses the same traditional G chassis as the advanced grade 555, and is one with high cost performance. Although the overall sound quality is tight, there are few quirks, and it is recommended for those starting out with audio. There is dullness and dirt over time (Sasaki Shota)
Maintenance information: 2025.10.13 maintained (PHONO input RCA terminal rattles on the negative side and cannot be disassembled and repaired, etc., replacement RCA jack left and right, REC switch disassembly contact polishing grease application, DC bias DC balance check)
2021.6.15 Maintained (volume VR replaced with a custom-made product with sound, speaker relay poor contact replacement, output circuit resistance deterioration 220Ω replacement, other Cartrich mode SW, direct INPUT, source direct SW, MUTING SW disassembly contact cleaning, other DC bias DC balance check adjustment, input/output connection sound confirmation)
Accessories: manual, power cable
Main specifications: 90W+90W (8Ω) PHONO (MM/MC) W430 × H150 × D375 mm 14.0 kg