The disposal price has been reduced. Member discounts are not applicable. 2025/5/18 sales price 250,000 yen Maintenance completed. This compression driver is famous for being installed in late PARAGON models. It uses a heavyweight magnetic circuit, and the sense of scale that is comparable to 375 is truly remarkable. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.5.18 Maintenance completed (magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement)
Accessories: none
Main specifications: 2 inch Alnico magnet, frequency band, 500 to 18,000 Hz, allowable input, 60 W, 16 ohms, throat diameter: 5.0 cm, diameter: 180 mm, depth: 130 mm, weight: 11.8 kg
The price has been reduced. 2025/6/4 sales price 398,000 yen Clean power supply up to 1200VA. It improves power supply waveforms polluted by noise and distortion, improves SNR, and expands sound field space. Since it has a large number of ports, it is suitable for connecting multiple players and amplifiers. The exterior has paint on the periphery of the power switch, and there are scratches and small scratches throughout. Serial F9Y404 (Takasaki Atsushi)
Maintenance information: 2025.6.4 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: maximum output 1200 VA (W), 3 pins x 6 ports, 2 pins x 2 ports, W465 x H243 x D500 mm, 38.9 kg
The price has been drastically reduced. 2025/5/31 sales price 765,000 yen piano black color. In addition to the high resolution unique to B&W, the sound with finer and smoother particles than before, and a large sound field feel are attractive. The degree of perfection is impressive, and the stage is larger than the size. There is a scuff on the bottom plate. Serial 15110002551FP37478 15110002552FP37478 (Murakoshi Yoichi)
Maintenance information: 2025.5.30 sound output confirmed
Accessories: instruction manual (copy), saran net, jumper cable
Main specifications: 2-way 2-speaker bass reflex type frequency band 34 Hz to 35 kHz 88dB 8 Ω unit configuration/25mm diamond tweeter x 1 165 mm continuous cone DST mid-range x 1 W238 x H424 x D345 mm 12.6 kg/book
The disposal price has been reduced. Member discounts are not applicable. 2025/5/29 sales price 348,000 yen Maintained! A rare Torrens dynamic long arm. It is made based on the 997 adopted in the EMT 927. The connectors are EMT type and are compatible with TSD-15 and Torrens MCH-1. A 7PIN DIN is attached to the output part, and a phono cable is attached (Murakoshi Yoichi)
Maintenance information: 2025.5.28 maintained (T subweight, OF/subweight missing added, genuine bias slot added, genuine bias weight added, original arm base product added, output cable added)
Accessories: instruction manual (copy), armrest (external product), mounting screws, inside force canceller, phono cable
Main specifications: Dynamic balance type EMT connector, effective length 297 mm, overhang 18 mm, needle pressure range 0 to 5 g
The price has been reduced! 2025/5/20 sales price 80,000 yen ※ We were able to confirm basic operations such as recording and playback, etc., but the counter is immovable, and since manufacturer repairs cannot be handled, it is currently on sale. 2-track 38/19cm specification Denon's separate open reel deck. Not only does it have a sense of stability similar to commercial models, but it is an authentic model where you can enjoy solid sound quality with little overall coloring. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 132052 (Tomoho Asaine)
Maintenance information: 2025.5.20 Operation confirmed
Accessories: Clampers ※ There is a crack inside on one side, so please prepare them separately
Main specifications: 2 track 38/19 cm specification mechanism part W470 × H385 × D270 mm 20 kg amplifier part W460 × H180 × D235 mm 6.5 kg
817A TYPE double woofer enclosure whose manufacturer is unknown. It is heavy and well-built. The unit has a mounting aperture of 350 mm and is sturdy. As for the exterior, there are small scratches and dullness over time, and black marks remain on the top plate. A speaker cable (CARDAS CROSSLINK1S) is included. Shipping costs will be estimated separately (Yamato Yuki)
Accessories: none
Main specifications: size 960 x 860 x 705 mm, weight 66.7 kg (actual measurement)
Set of 4 spikes from Jeff Roland A spike holder is also included. The know-how on resonance countermeasures cultivated over many years has been used to the fullest. The exterior has small scratches and a feeling of use (Takahashi Nobuyuki)
Accessories: instruction manual
The price has been reduced! 2025/6/3 sales price 398,000 yen Maintained! Mark Levinson mid-range power amplifier. Genuine Harman It is popular because it makes a lot of noise. Circuits for the left and right channels, including the power supply unit from the input terminal to the output terminal, are separated and configured independently. The driving power and subtlety that makes a large speaker play lightly, and the thick sound that feels good to listen to even in Madrigal Levinson are attractive. The exterior is dull and scratched on the top plate. Serial 2234 (Yonejima Satoshi)
Maintenance information: 2025.6.3 maintained (29 capacitors and others, replacement of deteriorated parts, DC voltage, DC offset voltage, idling current, and other adjustments)
Maintained by Harman on 2014.5.14 (capacitor and resistor replaced. (Readjustment and sound output test OK)
Accessories: instruction manual, power cord, balance short pin
Main specifications: 200W+200W (8Ω) 400W+400W (4Ω) 800W+800W (2Ω) bi-wire compatible input/RCA x 1 · XLR x 1 W446 x H262 x D479 mm 58 kg
The price has been reduced! 2025/5/24 sales price 39,800 yen HX series high-end machine that effectively controls space. It's a speaker for home theaters, but it has a core in the mid to low range, and the sound is sharp. You can enjoy sufficient quality even as pure audio. On the exterior, there are scratches and stains on the corn paper. Also, slight color loss can be seen on the sides. Serial I101283, I107730 (Yonejima Satoshi)
Maintenance information: 2025.5.24 sweep test is good
Accessories: saran net
Main specifications: 3-way bass reflex type (anti-magnetic) 20cm cone woofer x 2, 13cm cone midrange, 3cm dome tweeter 6Ω W364 x H1,102 x D397 mm 32.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2025/5/29 sales price 748,000 yen GRF Memory HE model. The baffle plate has been changed from cork, and the sound is sharp and tight. The connection between top and bottom is very smooth, and the glossy sound of female vocals in particular is exquisite. The exterior has small scratches and repair marks on one side. Serial 008606M (Yonejima Satoshi)
Maintenance information: 2025.5.29 sweep test good
Accessories: saran net, instruction manual holder, keys
Main specifications: bass reflex (DPS/distributed port system) 15 inch coaxial 2-way efficiency 95 dB impedance 8 Ω frequency characteristics 29 Hz to 25 kHz crossover frequency 1.1 kHz W800 x H1105 x D 480 mm weight 62 kg/bottle
The disposal price has been reduced! (Member prices are not applicable) 2025/5/31 sales price 798,000 yen The XX-3000, which is Macton's top model, will be in stock for the first time at Hi-Fi. A parallel SEPP circuit is used. It is a model that brings together know-how accumulated over many years and aims for the best sound quality in the world. Although it is a vacuum tube, it has a strong and firm tone, and the sound that can only be enjoyed with this is fascinating. There are scratches on the exterior. Serial 09I04 (Tamura Eiji)
Maintenance information: 2025.5.31 Maintained (nameplate peeling fixed. TAPE input solder correction, wire material restyling. Replace damaged screws. Vacuum tube pin cleaning. Replace the insulating tape. Correct volume misalignment and check other switches. Voice check for each input and output. Interior and exterior cleaning. 12BH7 x 6 unit configuration, DC ignition)
Accessories: power cable
Main specifications: W450 x H167 x D370 mm weight 20 kg
NuPrime's compact power amplifier. Parallel imports. Although it is an affordable size, it has 150W high power. The range is wide, and the sound quality with a high SN-feel makes it easy to drive even medium speakers. The stylish design is also attractive. The exterior is dull. Serial 84076110072 (Yonejima Satoshi)
Maintenance information: 2025.6.4 operation confirmed
Accessories: connection cord original box
Main Specifications: Output: 150W x 2 W215 x H59 x D394 mm Weight 7 kg
The price has been reduced! 2025/6/4 sales price 178,000 yen parallel product. This is a New Prime preamp with a built-in DAC. This is an attractive car with an easy-to-use size and plenty of input. The sound has clear contours and is very fresh. As for the exterior, there are small scratches and dullness on the top plate. Serial 84076110058 (Yonejima Satoshi)
Maintenance information: 2025.6.3 operation confirmed
Accessories: remote control, copy of instruction manual, power cable
Main specifications: input: USB, OPT x 2, COAX x 2, LINE x 2 output: RCA, XLR W216 x D383 x H59 mm 4.8 kg
The price has been reduced! 2025/4/20 sales price 138,000 yen The interior has been thoroughly reviewed, and deteriorated parts such as the volume and selector have been dismantled and polished, and deteriorated parts such as 10 diodes, 18 resistors, 8 transistors, and 7 capacitors have been replaced! Yamaha's famous C-2a. The transparency and three-dimensional effect of the sound have been brilliantly revived. I recommend this one for those who like natural, crisp sound in the mid to high range with good texture. The sound of the PHONO input is good, so it is a popular amplifier for analog fans. The exterior has a feeling of use such as dullness and scratches. Serial 02657 (Takahashi Nobuyuki)
Maintenance information: 2025.4.20 Maintained (panel lever switch and volume disassembly contact polishing. Replace the tone control circuit equalizer circuit, 10 varistor diodes in the power supply circuit, 8 transistors, 18 metal film resistors, and 7 capacitors. (I/O pin jack polish)
Accessories: copy of instruction manual
Main specifications: PHONO input 2 systems W435 x H72 x D320 mm 7.9 kg
*Equipped with a DAC (list price 72,000 yen) sold separately! PRIMARE's premain amplifier pursues simplicity. Achieves pure and clean sound quality with high power consumption while consuming ultra-low power. It is very practical with 3 high quality USB/TOS/RCA digital inputs. There are scuff marks and dirt marks on the exterior. Serial 302-1381 (Yonejima Satoshi)
Maintenance information: 2025.6.5 operation confirmed
Accessories: remote control, instruction manual, connection cord, power cord
Main specifications: output 80W x 2 (8Ω) 160W x 2 (4Ω) frequency characteristics 10Hz-20kHz input system/RCA x 4 system digital input/OPT/COAX/USB W430 x H106 x D380 mm 10 kg
“Virtual Earth” by KOJO TECHNOLOGY. The high-quality textured design with a satin white anodized finish on the top cover is also attractive. From the popular old model FORCE BAR EP, you can feel not only an increase in the surface area of the virtual earth foreign metal laminate, partial material changes, and improvements in S/N, but also improvements in fineness (Tamura Eiji)
Accessories: instruction manual, original box, 2 types of earth cable
Main specifications: W80 x H35 x D111 mm, weight approx. 775 g
※Each one has a large chip, so it's cheap. Set of 3 An insulator that made the name of audio replus popular. High-end basic model with a height of 20 mm. It brings out all the performance of the equipment, such as harmonic construction and vibration processing capabilities. Light stains are scattered. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: diameter 50mm height 20mm
Complete with accessories such as the original box! It is a compact yet high quality active speaker with a built-in DAC. It was also listed as the best buy at the time, and it delivers sound that's more than the size and price. It is also compatible with USB and Bluetooth, making it easy to use. (TAMURA Eiji)
Maintenance information: 2025.6.4 sweep check OK
Accessories: original box, remote control, instruction manual, connection cable, power cable
Main specifications: Active speaker with built-in DAC; input: USB/optical/Bluetooth analog RCA/PC output terminal: subwoofer output frequency characteristics 52 Hz to 40 kHz; W160 x D283 x H255 mm; weight 5.5 kg/bottle
Genuine Oba Shoji product. A pre-main amplifier with a high degree of perfection that is comparable to a separate system, and has extremely high sound quality. An attractive sound development with high SN, high resolution, and high density that cannot be enjoyed in domestic production without lowering the center of gravity too much. Since it has a pre-out, it is an ideal product as a stepping stone for the company's separate system construction. Since the optional phono module is not installed, INPUT1 is at a normal line level. There are some scratches and dullness on the front panel (Oikawa Tetsuji)
Maintenance information: 2025.6.4 operation confirmed
Accessories: remote control, power cable
Main specifications: Line-only model, 4 input unbalanced (RCA) systems, 3 balanced (XLR) speaker output, 1 system output, 100W+100W, W455 x H150 x D385 mm, weight 22.0 kg
Maintained! A record player with an SME long-arm 3012R mounted on a TD-127. This time it doesn't have an auto lift-up mechanism. It is a model incorporating Torrens' idea of “conveying music played by humans, not sounds played by machines.” When combined with a good cartridge, it's a player that can play anything from classical to rock regardless of genre (Daiki Goto)
Maintenance information: 2025.6.5 maintenance (replacement of deteriorated parts (electrolytic capacitors, semi-fixed volumes, transistors, etc.) on the board (control board, motor drive board), resoldering the board. VOL, front panel pitch adjustment volume disassembly/contact polishing. Disassemble and clean the tone arm. Indicator lamp replacement. Grease up the platter bearing. Since the motor does not rotate, the motor shaft is completely disassembled and the motor shaft is polished and lubricated. Disassemble and clean the clutch part and replace the felt. Made of MDF material because the bottom plate is missing. create. Floating adjustment. Check turntable rotation speed and check arm needle pressure. Check the sound output. Chassis cleaning. Comprehensive operation confirmation inspection.)
Accessories: none
Main specifications: [TD-127] belt drive floating suspension 33,45,78rpm 30cm zinc alloy turntable double 16-pole synchronous motor speed fine adjustment range ± 6% W555 x H200 x D460 mm 20.4 kg [3012R] heavy needle pressure compatible compatible cartridge 9.5 to 34 g needle pressure adjustment 0 to 5 g
The price has been drastically reduced. 2025/6/2 sales price 198,000 yen Maintenance including woofer edge replacement was completed in 2024/7. A 2-way system equipped with a large horn and professional driver typical of JBL. You can enjoy the exhilarating feeling unique to JBL with good extrusion in the mid and low frequencies and wide dynamic range of sound reproduction. It is an attractive speaker with characters that produce sound with good momentum, and is also easy to play. There are touch repair marks (Oikawa Tetsuji)
Maintenance information: 2024.7.2 maintenance completed (top plate coating, other overall cleaning/touch repair, saran net replacement, .woofer edge replacement, driver magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement)
Accessories: none
Main specifications: 2 way, 2 speakers, bass reflex system, floor type frequency band 32 to 2 kHz, crossover 950 Hz, sound pressure level 92 dB, 6 ohms, W561 x H985 x D406 mm, 52.3 kg/book
Interior and exterior restoration item! A floor-type speaker system incorporating the HPD385 into a rectangular enclosure. The initial Alnico unit is attractive. The moist and gentle sound is truly a tannoy sound. The balance between jazz and classical music is excellent. It has a beautiful finish with exterior maintenance. Serial 205947/205846 (Murakoshi Yoichi)
Maintenance information: 2024.11.5 maintained (exterior repair/polishing/clear finish, front and rear baffle repair/painting, saran net replacement, unit maintenance: low band edge replacement/magnetic circuit gap cleaning/center adjustment, fastener polishing, high frequency side magnetic circuit gap cleaning/center adjustment, network maintenance: frequency characteristic check, ATT cleaning, 4 pin terminal cleaning)
Accessories: saran net
Main specifications: 2 way 1 speaker sealed/floor type 15inch coaxial 2-way (HPD385) frequency specific 20 Hz to 20 kHz allowable input 85 W output sound pressure level 92 dB impedance 8 Ω W530 x H840 x D310 mm
Careful maintenance has been carried out, including exterior, coaxial unit high range magnetic fluid removal, and gap cleaning! Coaxial 2-way unit and super tweeter for agile use with any source. The top plate, bottom plate, and both sides of the enclosure have an unparallel structure, which greatly reduces sound contamination due to internal resonance. It plays an immersive playback sound. There is a feeling of use such as a slight dent on the edge (Takasaki Atsushi)
Maintenance information: 2025.6.5 maintained (exterior repair/cleaning (foot wobble repair on one side, repair/installation of both baffle fixings), saran net rubber looseness correction, unit maintenance: coaxial unit high range magnetic fluid removal/gap cleaning/center adjustment, one-side magnet detachment/bobbin detachment reattachment, unit detachment)
Accessories: manual, saran net, spikes, jumper cable*Spike receiver missing
Main specifications: 10 inch coaxial 2-way size W355 mm x H1015 mm x D370 mm weight 35 kg
※Inexpensive because it is in poor condition. Maintained! A typical Altec 1-inch driver mounted on Valencia and A7. The fact that it blows up without a ceiling is an appeal like no other. The sensitivity is also very high, and the vivid production is a first-class product. There is a scratch on the diaphragm, and there is overall corrosion (Oikawa Tetsuji)
Maintenance information: 2025.5.20 Maintained (vibration plate installation adjustment
DCR (A 7.6ohm vibrating plate scratch ant) (B7,3 ohm vibrating plate scratch ant) insulation bushing deterioration replacement)
Accessories: none
Main specifications: frequency characteristics, 500 Hz to 20 kHz, allowable input, 30 W, impedance, 8 ohms, output, sound pressure level: 107 dB, crossover frequency: 500 Hz or more, throat diameter: 25 mm, compatible horn: 511B, 811B, diameter 114 x D83 mm, 2.6 kg